PULSAR Barr Fire H20 User Manual

: June 3, 2024
: Pulsar

Table of Contents

FEATURES
PULSAR BARB FIRE H20 KIT INCLUDES
SPECS
QUICK START INSTRUCTIONS
- How to Use
POWER LEVEL INDICATION
H2O FUNCTION
IMPORTANT SAFETY WARNINGS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PULSAR Barr Fire H20

Barr Fire H20

The Pulsar Barb Fire features a bigger battery, variable voltage control, and a button-free, perfectly timed Sesh Mode for ease of delivery. Housed in a heavy-duty, all stainless steel body, the unique flat-ribbon, twisted Kanthal coil is wrapped around a quartz post, for a combo of precise heat mixed with enhanced flavor. The H2O Kit elevates your experience with the addition of a 6-inch glass bubbler attachment with carb cap and metal stand. The crushproof, covert carry case also makes it convenient for travel.

FEATURES

5-second Heat Up Time
Dual Ribbon Twist Kanthal Wrapped Quartz Coil
Ceramic Lined Chamber
5-minute Auto Shutoff
5-click On/Off Button
Adjustable Airflow
10-second Sesh Mode
Variable Voltage (4 Heat Settings)
Heavy Duty Stainless Steel Body

PULSAR BARB FIRE H20 KIT INCLUDES

1x Pulsar Variable Voltage Barb Fire Unit – 1450 mAh
1x Metal Base Stand
1x Bubbler Attachment – 6.5in
1x Metal Carb Cap
1x USB Charger Cord
1x Metal Dabber
1x Silicone Water Pipe Adapter
1x Replacement O-Rings
1x Carry Case – 8 x 4. 75in
1x Manual

SPECS

Size – 4.75 x 1.6in (120 x 41 mm)
Battery Capacity – 1450mAh
Ohms – 0.26-0.280
Input – 5V/1A
Voltage – Green – 1.8V Blue – 2.0V Red – 2.2V White – 2.4V

QUICK START INSTRUCTIONS

First, attach the Pulsar Barb Fire Battery to the included USB charger, and plug it into a handy USB port. Make sure not to let the unit hang as this can damage the USB connector.
While charging, the power button will flash red.
Light will turn green when fully charged, approximately 2.5 hours.
Before using the Pulsar Barb Fire unit, heat the unit a few times empty. This will burn off any impurities that may collect during the manufacturing process.

How to Use

Remove the all-metal mouthpiece. Load the desired amount of concentrate into the atomizer. Replace the mouthpiece.
Click the power button 5 times to turn on the device.
Cycle through your preferred temp by pressing the button 3 times.
When your preferred temp is selected, simply press the button and inhale. Make sure to adjust the airflow to your liking.

Sesh Mode – Press the power button twice after your preferred temp is selected to activate Sesh Mode. This will power your device without having to press the button for 10 seconds.

POWER LEVEL INDICATION

When the device is turned on, the power button light will flash 3 times to show your current level of power charge.
Green – 100% to 60%
Blue – 60% to 20%
Red – 20% or below

H2O FUNCTION

H2o Function

Attach the bubbler to the device by removing the top portion of the Barb Fire.
Place the bottom part of the device onto the metal base stand.
Fill the bubbler with water just slightly above the bottom of the perc. Be careful not to overfill the bubbler. Perform a quick test pull to make sure the bubbler is not overfilled or underfilled.
Place the preferred amount of concentrate onto the coil and secure the bubbler over the silicone rings. Adjust until there is a firm fit.
Place the carb cap onto the bubbler and follow the “How to Use” instructions to begin your session.

IMPORTANT SAFETY WARNINGS

Do not expose the device to extreme temperatures or direct sunlight.
Do not drop the device or accessories.
Do not drop or submerge in any liquid.
Do not modify the electronics in any way.
This device is intended for adults only. Do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding. Failure to follow any of these instructions could result in product damage, property damage, personal injury, and may void warranty.

| Scan the QR code for the most current version of the manual or go to
---|---