MAXIM LIGHTING 86198 Ledge LED Outdoor Wall Sconce Instruction Manual

MAXIM LIGHTING 86198 Ledge LED Outdoor Wall Sconce

Specifications

• Item/Model Number: 86198 Ledge LED Outdoor Wall Sconce
• Lamping I Ampoule: 1xLED 15W (Included)
• Input Power: 17W Max
• Input Voltage: 120-277Vac
• Output Voltage: 12-40Vdc 350mA
• Dimmable: Yes, Triac Dim
• Dimensions: L2.6W1.3H0.8

Product Usage Instructions

Installation

1. For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
2. Leave a gap at the bottom to allow moisture to escape.

Electrical Connections

Ensure power is turned off before proceeding with any electrical connections.

Connect the white wire to the V+ terminal and the black wire to the V- terminal according to the provided factory connections.

Dimmer Compatibility

The product is compatible with the following dimmers:

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON DSLO6

For more dimmer compatibility information, visit: Maxim Lighting Dimmer Compatibility

Frequently Asked Questions

Q: Can this outdoor wall sconce be installed indoors?

A: It is recommended for outdoor use due to its waterproofing features. Indoor installation may affect performance.

Q: What should I do if the sconce fails to light up?

A: Check the electrical connections and ensure the power source is functioning correctly. If issues persist, consult a professional.

Q: Is it possible to replace the LED bulb in this sconce?

A: The LED bulb included is not replaceable as it is integrated into the fixture. Contact customer support for further assistance.

Item/Model Number: 86198
Ledge LED Outdoor Wall Sconce

Lamping I Ampoule:1xLED 15W(Included)

Please consult a qualified electrician prior to install

Made in China

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.

Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire. Check the product cord to be sure is free torn or frayed.
WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.

WET LOCATION: For outdoor use, caulk around ALEXEREUR fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started, ensure the package contains the following components:

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

WIRING DIAGRAM DIMMER COMPATIBILITY

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON DSLO6

GENERAL COMPATIBILITY
TRIAC / FORWARD PHASE ELV / REVERSE PHASE
ONLY at 120VAC
Due to inrush current, wattage should not exceeed 150W on a 600W dimmer

IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our

Dimming Compatibility Chart online:
https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required
2024 MAXIN LIGHTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>