Emily bol LXL124360 Cardboard Hanging Lamp User Guide
- June 16, 2024
- Emily bol
Table of Contents
Emily bol LXL124360 Cardboard Hanging Lamp
Product Specifications
- Model: LXL124548
Product Usage Instructions
- Warning: Before installing the product, ensure that the main power source is turned off.
- Assemble the lamp according to the instructions provided in the drawing.
- Connect the lamp to the main supply using the terminal block.
- Make sure that the cables are securely connected to the terminals on the device.
- Once the installation is complete, activate the power source and test the function.
Frequently Asked Questions
- Q: Can I install the product without turning off the main power source?
- A: No, it is essential to turn off the main power source before installing the product to ensure safety.
- Q: How can I test the function of the lamp after installation?
- A: Once the installation is complete and the power source is activated, simply switch on the lamp to test its function.
- Q: Can I use the lamp with a different voltage than the mains supply?
- A: No, it is important to connect the lamp to the mains supply with the correct voltage specified in the instructions. Using a different voltage may damage the lamp or pose a safety risk.
Installation instructions
Read the instructions carefully before installing the product. Save the instructions manual for future reference.
- Installation only by persons with electro-technical knowledge and experience.
- Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
- In case the product is made for indoor use, it should be used in a dry and clean environment only (IP20).
- Do not install or use the product outdoors. The product should not come in contact with water, dampness, or other fluids.
- The light source can get hot. Pull out the plug and let the light source cool down before replacing it.
- Only use a dry cloth for cleaning the product.
- Warning : ensure that the main power source is turned off before installing the product.
- Assemble the lamp according to the instructions in the drawing.
- Connect the lamp to the main supply with the terminal block.
- Make sure that the cables are connected securely to the terminals on the device.
- When the installation is complete, activate the power source and test the function.
Notes on disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste. For more
information, contact the retailer or the local authority responsible for waste
management.
Care
- Before cleaning the unit, disconnect it from the power outlet, if necessary.
- Do not use aggressive cleaning agents.
Warranty
The unit has been carefully checked for defects. If nevertheless, you do have cause for complaint, please go back to the retailer where you bought the product together with your proof of purchase.
Safety
General advice
Read the manual carefully before use. Keep the manual for future reference.
- Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- Do not modify the product in any way.
- Do not expose the product to water or moisture (IP20)
- Do not immerse the product into water (IP44 – IP66).
- Keep the product away from heat sources.
- Do not block the ventilation openings.
- Do not look directly into the light source of the LED lamp.
- Keep a minimum distance of >2 meters between the lamp and the surface being illuminated.
Electrical safety
- To reduce the risk of electrical shock, this product should only be opened by an authorized technician when service is required
- Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified agent.
- Caution, risk of electric shock.
- The external flexible cable or cord of this luminaire cannot be replaced: if the cord is damaged, destroyed. the luminaire has been destroyed
- This product is a toy please keep it inaccessible to children.
Disclaimer
We reserve the right to make technical modifications without notice. We are not liable for damage arising from incorrect handling, improper use, or wear or tear.
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union
The product complies with all applicable specifications and regulations in the
country of sales. The declaration of conformity is available upon request.
CE declaration
This product complies with the following directives:
- LVD : 2014/35/EU (Not applicable for solar products)
- EMC : 2014/30/EU
- RoHS : 2011/65/EU
Additionally, for products with Radio transmitter units:
RED : 2014/53/EU
Imported by Lumen Import B.V. Postbus 15980, 1001 NL Amsterdam, the Netherlands
Made in China
Documents / Resources
|
Emily bol LXL124360 Cardboard Hanging
Lamp
[pdf] User Guide
LXL124360 Cardboard Hanging Lamp, LXL124360, Cardboard Hanging Lamp, Hanging
Lamp, Lamp
---|---