VOICE CADDIE Laser Fit Micro Laser Rangefinder User Manual

: June 20, 2024
: VOICE CADDIE

Table of Contents

VOICE CADDIE Laser Fit Micro Laser Rangefinder
Product Specifications
Product Parts
Battery
LCD Brightness Control
Slope ON/OFF
Distance Measurement
Precautions for Using the Product
Warranty Conditions
Fcc
Frequently Asked Questions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOICE CADDIE Laser Fit Micro Laser Rangefinder

Product Specifications

Laser Receiver/Object Lens
Laser Diode
M Button
Power/Measure Button
Eyepiece and Focus Control Unit
LED Charging Indicator (Charging: Red flashing, Fully charged: Green)
USB-C Port
Laser LCD Screen
- Height Display (Displayed only when Slope is ON)
- Battery Level Indicator (Lights up when the battery is low)
- Laser Indicator
- Ball To Pin Mode
- Unit of Measurement (Measured Distance, Calibrated distance when Slope is ON, linear distance when Slope is OFF)
- LCD Brightness Icon Manual Display (3-step brightness settings)
- Straight Distance and Height (Displayed only when Slope is ON)
- Visual Ring (Displayed when Pin TracerTM is active)

Product Parts

Laser Receiver / Object Lens
Laser Diode
M Button
Power / Measure Button
Eyepiece and Focus Control Unit
LED Charging Indicator (Charging: Red flashing, Fully charged: Green)
USB-C Port

Description of Laser LCD Screen

Power ON
After charging the battery, press the Power/Measurement button( ) to turn on the screen.

Focus Adjustment
Turn the focus knob on the eyepiece left or right to sharpen the image on the LCD screen.

Battery

When the ( ) icon is displayed on the screen, charge the battery.
If the ( ) icon is lit on the screen, the power may be turned off.

LCD Brightness Control

With the power on, the brightness level is adjusted each time you press the M button( Ⓜ ) while holding down the Power/Measurement button( ).

Brightness Level: Manual three levels

Unit Change
With the power on, double-press the M button ( Ⓜ ) to change between meters (M) and yards (Y).

Changing the Unit of Measurement is enabled only when the Slope is ON.

Slope ON/OFF

With the power on, press and hold the M button( Ⓜ ) for 5 seconds to change Slope ON/OFF.

When the Slope is ON, it shows the calibrated distance to which the V-AlgorithmTM is applied.
When the Slope is OFF, it shows the straight-line distance.

Distance Measurement

Spot Measurement

With the power on, press the Power/Measurement button( ) briefly to measure.
Quickly measure various targets such as fairways, bunkers, and hazards to show the distance.

Pin TracerTM Measurement

With the power on, press and hold the Power/Measurement button( ) and scan around the pin (up to 3 seconds)
When scanning the surroundings of the pin, it will recognize the closest object as a pin and give you a jolt (visual jolt ring & vibration)

Distance Measurement

What is Ball Pin Measurement?

Helps you select the right club with the luxury of measuring the distance from the ball to the pin effortlessly from your cart.

How to enter the Ball To Pin Measurement Mode

How to measure

Measure when the ball icon blinks
Measure when the pin icon blinks
Show the Ball To Pin distance

Precautions for Using the Product

This device may be affected by the weather, such as rain and clouds, and the surrounding environment.
Depending on your environment and how you use it, battery consumption may increase.
Do not use this device for any other purpose, such as children’s toys.
If the person’s eye is exposed directly to laser irradiation or exposed to the sun or intense light through this device, their eyesight may be impaired.
The lens is coated, so care must be taken when cleaning. To prevent damage to the lens, do not touch the lens directly with your fingers or rough material.
Do not keep this device in hot places, such as exposed to direct sunlight in
closed vehicles on hot days or with heaters.
Liquids or other substances may damage the device. Please do not use it in an environment where water can come into contact with it, and wipe off any foreign substances immediately.
Do not randomly modify this device by dropping, throwing, putting in foreign substances, disassembling, incineration, etc.
Be careful not to open the pouch and drop the product due to strong movement.
Natural cosmetic deformation and degradation of performance due to everyday use and aging are not warranted.
Due to the nature of the unibody optical device, repairing this device for parts replacement or any services that require disassembling the device is not recommended and will void the warranty.
If you do not use this device for a long time, please charge it once a month to prevent complete discharge.

Safety Precautions for Using the Laser

The laser emitted from this product is invisible. It is safe to operate by your intention according to the contents of this manual.
Warning: It is dangerous to look at the laser with another optical instrument, please do not look at the laser through the telescope. If you handle the product arbitrarily without following this manual, you may be injured by the laser.
Information about laser Wavelength: 905nm, Pulse Width: 23nsec, Energy: 0.2μJ or less, Divergence Angle: 2.4mrad
Class 1M laser product by IEC 60825-1: 2014

Warranty Conditions

Warranty as follows

This device was produced through strict quality control and thorough inspection and may be exchanged or reimbursed under the Fair Trade Commission Notice Consumer Dispute Resolution Criteria.
If any change problem to defect occurs in normal use, the product will be repaired free of charge within the warranty period returns for inaccuracies will be at customers.
In case of product abnormality caused by the user’s carelessness even if it is within the free warrenty period, or in case the warrenty period has expired, it can be repaired on a charge.
For after-sales service and damage compensation, please present this warrenty and proof of purchase (receipt).

Fcc

This device complies with Par 15 of the FCC Rules. Operation is subject to The following two conditions:

This device may not cause harmful interference,
This device must accept any interference received, Including interference that may cause undesired operation.

Product Name	VOICE CADDIE Laser FIT
Serial No.
Purchase Date
Dealer
Dealer Contact
Buyer’s Name and Contact
Warranty Period	For one year after the purchase of the product (6months for

components)
Returns| 30 day money back guarantee
Product| VOICE CADDIE Laser FIT
---|---

Key Features

| 6x Magnification, Dual Display, Pin Tracer™, V-Algorithm™, Ball To Pin, Slope & Non-Slope
Size/Weight| 86.2mm(width) X 37.6mm(Height) X 56.2mm(Length) / 116g
Measuring Range| 5 to 800 yards (1 yard = 0.91m)
Maergin of Error| Within 1 yard
Device Name| VOICE CADDIE Laser FIT
Battery| Lithium rechargeable battery (USB-C)
Manufactured by/in| VC Inc. / China
Imported/Sold by| VC Inc.
Company| VC Inc.

Call: 562-926-3978
6940 Aragon Cir. Unit 6
Buena Park, CA 90620