RIDEMAKERZ 503084 RZ Transmitter Instructions

: June 3, 2024
: RIDEMAKERZ

Table of Contents

503084 RZ Transmitter
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

503084 RZ Transmitter
Instructions

503084 RZ Transmitter

RIDEMAKERZ 503084 RZ Transmitter

Use the ON/OFF switch to turn your CONTROLLER ON. The center logo will be flashing first each time the power is turned on. Then the logo light will turn steadily on when pairing is successful.

RIDEMAKERZ 503084 RZ Transmitter - fig

Use the switch on the bottom of your CHASSIS to turn on the CHASSIS and pair with your CONTROLLER.

OPERATING MORE THAN THREE RIDEZ
Up to 10 Ridez can be used at one time independently by using the auto pairing feature on the transmitter and chassis. The illuminated logo on the transmitter will be flashing when it is turned to an on position. The illuminated logo will stop flashing when pairing is successful with a chassis that is turned to an on position.

2.4G auto pairing feature
NOTE: Radio-control operation is susceptible to interference. Large metal objects such as chain-link fences, light poles, power lines or vehicles can cause loss of performance. If this occurs, consider moving to a location free from these potential obstructions.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.