Global Sources Elysium Eye 900 Eyecare Aging Stress Fatigue Instructions

Global Sources Elysium Eye 900 Eyecare Aging Stress Fatigue

Product Information

The ELYSIUM EYE-900 is a device manufactured by INTOBORN Co., Ltd. that is used for eye care. It is designed to provide relief to tired and strained eyes by emitting gentle heat and vibration. The device comes with various accessories such as a charging cable,  user manual, and a storage pouch. It is important to read the instruction manual before using the product to ensure proper use and precautions.

Product Usage

Before using the ELYSIUM EYE-900, it is important to take note of the following precautions:

• Close your eyes when using the device.
• Consult a doctor if you have skin allergies.
• Avoid using the device on cuts or potentially problematic areas of the skin.
• Remove accessories such as contact lenses and hairpins before use.
• If you have symptoms of eye disease or a history of surgery in your eye area, consult a doctor before use.

To use the ELYSIUM EYE-900:

1. Make sure your hands are clean and dry before handling the device.
2. Charge the device fully before first time use.
3. Press and hold the power button for 3 seconds to turn on the device.
4. Select the desired mode by pressing the mode button.
5. Place the device gently over your closed eyes and allow it to rest for 10-15 minutes.
6. After use, turn off the device by pressing and holding the power button for 3 seconds.
7. Clean the device with a soft, dry cloth and store it in a safe place.

It is important to follow the storage and user environment guidelines provided in the instruction manual:

• Store the device in a safe place after use and avoid placing heavy objects on it.
• Store the device out of reach of infants or children.
• Check the environmental conditions for storage: temperature (0 ~ 50°C), relative humidity (<95%R.H, non-condensing), atmospheric pressure (50 kPa ~ 106 kPa).
• Check the environmental conditions before using the device: temperature (15 ~ 35°C), relative humidity (<95%R.H, non-condensing).
• Make sure to check the supply power and plug it into the outlet to prevent fire or component failure.
• Avoid direct sunlight when using or storing the device.

This user manual may be amended for the improvement of the product without prior notice.
The images in this instruction manual may differ from the actual product.

About the Instruction Manual

• This document contains copyrighted proprietary information.
• This user manual is provided with the ElLYSIUM EYE-900 to the user.
• This instruction manual describes the precautions and describes the possible risks that the user must recognize and pay attention to while using the ELYSIUM EYE- 900.
• if you have any questions or need more information about the product, please refer to your contact information or contact your customer service representative.

Warranty

• The contents of this document are subject to change without notice.
• The manufacturer is not responsible for any resulting problems, losses or damages arising from the use of any other performance specifications or other information except those contained in this User’s Guide.

History of revision

• The part numbers and revision numbers shown in this document indicate the current version.
• If there is a significant change in the part number or technical content of the document, the version number may change

Precautions

Be aware of the following precautions before using the ELYSIUM-900:

• When using the ELYSIUM-900, be sure to close your eyes.
• Patients with skin allergies should consult a doctor before using ELYSIUM-900.
• Do not use it on cuts or potentially problematic areas of the skin.
• Remove and use accessories such as contact lenses and hairpins.
• lf you have symptoms of eye disease or a history of surgery in your eye area, or if you are receiving eye treatment such as glaucoma, cataracts, and retinal peeling, please consult your doctor before using it.
• Do not walk while in use of ELYSIUM-900 as there is a risk of accidents.

When using the ELYSIUM-900, note the followings:

1. If any abnormalities are found in the instrument, stop using it immediately and turn off the power.
2. if you feel something wrong with your body while using the instrument, stop using it immediately.
3. If the instrument does not operate, contact your local sales office and service center immediately

• Do not use the product in environments where electromagnetic waves are exposed as this may cause malfunction
• To prevent fire, don’t use the instrument near the heating device and avoid direct Sunlight.
• if there is a strange sound, smell, smoke, etc. from the main body, ask the manutacturer to repair it immediately.
• This product is not a medical device.
• Do not disassemble or modify the product arbitrarily.
• We are not responsible for the consequences of violating the regulations.

How to store / User environment

How to store

• store the device in a safe place after use and do not place heavy objects on the device.
• Store out of reach of infants or children.
• Please refer to the environmental conditions below for storage.
  • Temperature: 0C 50c
  • Relative humidity: (95%R.H (Non-condensing)
  • Atmospheric pressure: 50 kPa ~ 106 kPa

User environment

• To prevent fire or component failure, be sure to check the supply power and plug it into the outlet.
• Avoid direct sunlight.
• Refer to the environmental conditions below before using.
  • Temperature: 15C35C
  • Relative humidity: (85%R.H (Non-condensing)
  • Atmospheric pressure: 76 kPa ~ 106 kPa

Product description

Product composition

Product appearance

1. Front and rear
   No.| Name| Description
   ---|---|---
   ①| Cushion| Transfer electromagnetic field to the area around the eye
   ②| Adapter Connector| Connector that connect to the adapter to connect power
2. The operating department

Product specification

Rated power supply
(Adapter: Input, output)| Input voltage: AC 100-240 V, 50/60 Hz Max. 1.5 A
Output voltage: DC 12 V, 5 A
Power consumption| 70     VA
width(body)| 224 mm(W) x 80 mm(H)
weight(body)| 290 g

Mode of operation and how to use

Operating Mode

• There are three modes of operation, which change sequentially when the Mode button is pressed for 2 seconds.
• The changed mode can be seen through the LED color, each mode operates for 15 minutes. The information for each mode is as follows.
  | Waveform| LED Color| MODE
  ---|---|---|---
  Mode 1| Full square wave| Green| Activation program for the morning
  Mode 2| Half square wave| Yellow| Activation program for the afternoon
  Mode 3| Half square wave| blue| Rest and sleep-inducing programs

Preparations before use

1. Before use, check for significant deformation, discoloration, cracks, foreign substances, etc.
2. If there are any foreign substances on this product, wipe it off with a soft cloth or a cleaning brush.
3. Ensure that all components, including this product, are appropriately equipped.
4. Be sure to familiarize yourself with the User’s Manual.
5. Before connecting the power plug to an outlet, check the rated power.
6. Make sure that the ground is connected correctly.
7. Make sure that the adapter cable is properly connected to the body connector.

How to Use / Order of Operation

1. When power is supplied, a green LED is lit on the main body.

2. When the “Star/Stop” button is pressed for 2 seconds, the LED flashes to generate an output, and when the Mode button is pressed for 2 seconds, the mode is changed.
   Pressing the Start button again for 2 seconds while in the changed state operates in the changed mode.

3. The output is operated for up to 15 minutes. (Auto Settings)

   • Pressing the “Star/Stop” button for 2 seconds during operation stops.

There are a total of three modes, and it can be distinguished through the LED color that is lit.
When the stop button is pressed and restarted after setting the mode, the previously set mode is output.

How to care after use

1. Store at room temperature and avoid hot and humid places.
2. Store in a place that is not adversely affected by air pressure, temperature, humidity, wind, etc.
3. Storeina safe place from vibration or shock.
4. Unplug and store power when not in use for a long time.
5. If the product is stained with foreign substances, wipe it with a soft cloth.
6. Contact our AS department or headquarters for further cleaning or inspection.

Product Quality Assurance Policy

This product is manufactured by Intobon Co., Ltd. and the criteria for compensation for repairs and exchanges are in accordance with the Economic Planning Agency’s Response “Consumer Accident Compensation Rules”.
INTOBORN CO., Ltd. guarantees proper management in the design, development, and manufacture of this product.
[Manufacturer]: Intobon Co., Ltd., 88, Somang-gil, Juchon-myeon, Gimhae-si. Gyeongsangnam-do, Research Building 212 of Gimhae Industrial Promotion Foundation
Tel: 070-8623-5853 Fax: 051-980-5853

If you experience inconvenience during use, notify the product of defects, and if you have any suggestions for improvement, please contact INTOBORN Co., Ltd. and we will reflect the customer’s opinion.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>