JBL Club 1000D Club Series Subwoofer Enclosures Owner’s Manual

Table of Contents

Installation Warnings and Tips
- Be sure that screws or wires will not puncture brake lines, fuel lines, or wiring harnesses, and that wire routing will not interfere with the safe operation of the vehicle.
Choosing a Mounting Location for the Enclosure
- Choose a mounting location that doesn’t interfere with cargo, the fold-down rear seat, or the trunk lid. Securely mount the enclosure to the mounting surface.
- WARNING: Playing loud music in an automobile can permanently damage your hearing. Listening at low levels while driving is recommended.
General Care
- The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
- A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for connection to the hands.

Q: Can I connect the subwoofer enclosure to the mains power?
- A: No, this product is designed for mobile applications and should not be connected to the mains power.
Q: What should I do if I puncture a wire while installing the enclosure?
- A: If you puncture a wire, ensure it is properly insulated and repair any damage before use.

THANK YOU FOR CHOOSING THIS JBL PRODUCT

This product has been designed to deliver great bass performance from a compact, easily installed enclosure.
To get the best performance from your enclosure, we strongly recommend that you entrust installation to a qualified professional.
Although these instructions explain how to install your enclosure in a general sense, they do not show specific installation methods that may be required for your particular vehicle.
If you do not have the necessary tools or experience, do not attempt the installation yourself.
Instead, please ask your authorized JBL car audio dealer about professional installation.
To help us serve you better if your enclosure ever requires warranty service, please retain your original sales receipt and serial number.

INSTALLATION TIPS
- Always wear protective eyewear when using tools.
- Turn off all audio components and other electrical devices before you start. Disconnect the negative (–) lead from your vehicle’s battery.
- Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring harnesses, and that wire routing will not interfere with the safe operation of the vehicle.
- When making electrical connections, make sure they are secure and properly insulated.
- Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.
- Do not mount speakers where they will get wet.
CHOOSING A MOUNTING LOCATION FOR THE ENCLOSURE
- Choose a mounting location that doesn’t interfere with cargo, the fold-down rear seat or the trunk lid.
- The best location is usually a corner of the trunk or cargo area. Securely mount the enclosure to the mounting surface.
- WARNING: Playing loud music in an automobile can permanently damage your hearing as well as hinder your ability to hear traffic.
- Listening at low levels while driving is recommended. HARMAN International accepts no liability for hearing loss, bodily injury or property damage resulting from use or misuse of this product.

Connect the + and – terminals on the enclosure to the amplifier’s outputs, observing proper polarity.
Use at least 4mm2 (11 AWG) speaker wire for the connections to the enclosure of Club 1000P, and Club 1200P.
And 5mm2 (10 AWG) speaker wire for the connections to the enclosure of Club 1000D, and Club 1200D.

	CLUB 1000P	CLUB 1000D	CLUB 1200P	CLUB 1200D
Subwoofer:	1x 10″ (250mm) Polypropylene Driver	2x 10″ (250mm) Polypropylene
Driver	1x 12″ (300mm) Polypropylene Driver	2x 12″ (300mm) Polypropylene

The loudspeaker may be cleaned with a damp cloth.
Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage.
This product is designed for mobile applications and is not intended for connection to the mains.

JBL Club1200P/JBL Club1000P
Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES.
www.JBL.com.
© 2023 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
CA_JBL_Club 1000P 1000D 1200P 1200D subwoofer_OM_Global_CR_V8_online