CASIO 5716 MTD-125-2A Watch User Guide
- June 13, 2024
- Casio
Table of Contents
CASIO 5716 MTD-125-2A Watch
Product Information
- Model : MA2208-EA
- Operation Guide : 5716
For more information about operational procedures, visit the CASIO website.
Note: The appearance of your watch may differ slightly from the one shown in the illustration.
Components:
- Hour Hand
- Minute Hand
- Second Hand
- FRI 30 (Day Indicator)
- Day of the Week Indicator
- Crown
Crown Operations:
Some water-resistant models (10BAR, 20BAR) have a screw-in crown. To
perform a crown operation:
- Rotate the crown towards you to unscrew it. Avoid applying undue force when pulling.
- Pull the crown out.
- Note that the watch loses its water resistance while the crown is unscrewed.
- After performing a crown operation, fully screw the crown back in.
Rotary Bezel:
If your watch has a rotary bezel, you can rotate it to align its mark with
the minute hand. This allows you to track elapsed time since aligning the
mark.
Specifications:
- Accuracy at normal temperature (per month)
- Battery type: SR920SW
- Battery life: Approx. 3 years
Product Usage Instructions
Time Setting:
- When the second hand is at 12 o’clock, pull the crown out to Click 2.
- Rotate the crown to change the time setting.
- Push the crown back in on a time signal to resume timekeeping.
- Note: Set the correct AM or PM time and move the minute hand four or five minutes past your final setting, then back it up to the desired setting when changing the time.
Day Indicator Setting:
- Pull the crown out to Click 1.
- Rotate the crown towards you to set the day indicator.
- Push the crown back in.
- Note: The day indicator setting uses a 31-day month. Make adjustments for months of shorter lengths. Avoid changing the day indicator setting between 9:00 p.m. and 4:00 a.m., as it may not change correctly at midnight.
Day of the Week Indicator Setting:
- Pull the crown out to Click 1.
- Rotate the crown away from you to set the day of the week indicator.
- Note: Avoid changing the day of the week indicator setting between 9:00 p.m. and 4:00 a.m.
- Push the crown back in.
Operation Guide
Your watch may differ somewhat from the one shown in the illustration.
Crown Operations
Some water-resistant models (10BAR, 20BAR) have a screw-in crown. When you
need to perform a crown operation, rotate it towards you to unscrew it. Then
pull the crown out. Avoid applying undue force when pulling. The watch loses
its water resistance while the crown is unscrewed. After performing a crown
operation, fully screw the crown back in.
If your watch has a rotary bezel…
- You can rotate the bezel to align its ▼ mark with the minute hand. Then you will be able to tell how much time has elapsed since aligning the ▼ mark.
Specifications
Accuracy at normal temperature (per month)| Battery type| Battery
life
---|---|---
±20 seconds| SR920SW| Approx. 3 years
Specifications are subject to change without notice.
To adjust the time setting
- When the second hand is at 12 o’clock, pull the Crown out to Click 2.
- Rotate the Crown to change the time setting.
- Push the Crown back in on a time signal to resume timekeeping.
Note
- Take care that you set the correct AM or PM time.
- When changing the time, move the minute hand four or five minutes past your final setting, and then back it up to the setting you want.
To change the day indicator setting
- Pull the Crown out to Click 1.
- Rotate the Crown towards you to set the day.
- Push the Crown back in.
Note
- The day indicator setting uses a 31-day month. Make adjustments for months of shorter lengths.
- Avoid changing the day indicator setting between the hours of 9:00 p.m. and 4:00 a.m. Otherwise, the day indicator may not change correctly at midnight.
To change the day of the week indicator
- Pull the Crown out to Click 1.
- Rotate the Crown away from you to set the day of the week.
- Push the Crown back in.
Note
- Avoid changing the day of the week indicator setting between the hours of 9:00 p.m. and 4:00 a.m.
You can also find information about operational procedures at the CASIO website. https://support.casio.com/global/en/wat/model/5716/