HONEY 32083383 12V Electric Tractor Toy User Guide
- June 16, 2024
- Honey
Table of Contents
Guide Book
- R/C controls forward/backward and left/right, remote control priority
- Music
- Volume adjustment
- Power display
- Forward and backward
- High and low speed
- Wireless connection
WARNING: The toy is to be assembled by an adult.
In unassembled state contain potentially hazardous sharp points, sharp edges
and small part, so please keep out of baby’s reach
Warning: Not to be used in traffic.
Parts List: (Name and Quantity)
| Name| Quantity
---|---|---
A| Car body|
1
B
| Front and rear wheels| 4
C| Driving wheel|
2
D
| Steering wheel| 1
E| Drag bucket|
1
F
| Long fence| 2
G| Short fence|
1
H
| Body connectors| 1
I| Exhaust|
1
J
| Charging cover| 1
K| Drag bucket base|
1
L
| Drive motor| 2
M| Rear axle|
1
N
| Central axis| 1
O| Seat|
1
P
| Handle| 2
Q| Link sticks|
1
R
| Screw| 7
S| Wheel covers|
6
T
| Wrench| 2
U| Remote control|
1
V
| Charger|
1
Product Specifications:
Name Specification
Battery 12V
Suitable age 36-96 months
Loading capacity 30kg
Product size 1285654cm
Speed 3-5 km/h
Charge/Use time charge 8-12h, use 1-2h
Charger Input: 100-240V Output: 12V
Remote control AAA1.5V
The above parameters are selected by the customer, and the specific parameters shall be subject to the actual sample.
Function
Button function
(1) Horn (6) MP3 interface
(2) External socket (7) Music Panel
(3) Power display (8) Start button
(4) high and low speed (9) Light button
(5) Forward and backward (10) Power pedal
Remote control function and explanation
Do not swift forward/backward button when car is driving, or will damage the
motor.
Remote control can be used normally when battery assembled.
Remote control should be used under adults’ supervision.
Remote control is prior to man control.
- Forward
- Speed
- Indicator Light
- Stop
- Right
- Left
- Backward
How to adjust R/C frequency:
Long press forward and backward button for 3 seconds, and the speed indicator
flashes. Then turn on the power, the speed indicator goes to long bright,
means the connection successfully. If the speed indicator no response, means
the connection failed. Replace the batteries and retry.
Remote control battery operation
Take off the battery cover. Put two AAA1.5V remote control battery in with
right polarity.
New and used batteries can not be used mixed.
Do not insert batteries into wrong polarity, or will be short-circuited.
Non-rechargeable batteries can not be recharged. Exhausted batteries should be
replaced by adults.
The exhausted battery must be handled and operated properly by adults only. Do
not be played by children.
Installation Order Diagram
1. Middle wheel and body connections
The central shaft passes through the body, the two drive motors are fixed by
the shaft, and the two intermediate wheel sheaths are on the motors and fixed
with washers and nuts. Finally tighten with a wrench.
Use four 4*10 screws to secure the body connection to the body.
Finally, press the upper wheel cover.
2. Front wheel
Remove the washer and nut from the front axle, then put the gasket first, then
the front wheel, fix it with a washer and nut, tighten it with a wrench.
Finally, press down on the upper wheel cover
3. Rear wheels
Put a spacer in the embossed position of the rear axle, then pass through the base of the body, put a gasket and put on the casing, then put a spacer at each end to cover the wheels, and then put the gasket and nut to fix it, and tighten it with a wrench. Press on the wheel cover.
4. Installing a mop
The base of the body and the buckle of the body are pressed tightly, pay attention to the direction of the body, it is difficult to remove it if the direction is installed incorrectly, as shown in the figure, and finally the fence can be pressed according to the corresponding buckle card.
5. Connection of wires
The drive motor connection wire is plugged in, note that L connects the motor
on the left and R connects the motor on the right.
A red power cord can be plugged into the copper sheet at the red end of the
battery. Snap the charger into the front body card slot.
6. Seats and handles
Before installing the seat, first clamp the charging hole cover at the charging hole position, then the front of the seat snap is snapped into the body hole, and then one rear end can be fixed with three 4A10 screws. The handle can be inserted into the jack as shown in the picture, and note that the beveled end is facing the front of the car.
7. Steering wheel and exhaust pipes
The button at the lower end of the steering wheel is pressed and inserted into the steering wheel base on the body. The exhaust pipe is inserted into the two holes in the front of the car.
8. Connection between body and body
The body connection at the rear of the body is inserted into the body and fixed with the fixing part.
Warnings
For children’s safety, please read these carefully.
Assembly and adjustment must be done by adults, keep children away.
Keep children under 36 months away from small parts.
Safe belt is a must when children playing. Do not be close to fire.
Adult must teach how to play it and never leave children alone for playing.
Do not stand up or play when children are stepping on foot pedal.
Battery must be charged by adults only. Please charge it first before use.
Keep children away from plastic bag, or suffocation may occur.
Only use spare parts which provided by manufacturer.
Charger is not a toy for playing.
Maximum loading capacity is 30KG. Do not overload.
Suitable age: 36-96 months.
Safety use
Do not play in the street, road, slope or ditch.
Do not change the line or add electric device to the car.
Play the car in the dry area, not wet. Keep away from fire, or may damage the
line.
One or two riders one time only. Do not overload.
Maximum capacity is 30KG.
Turn power off if no use. If long time no use, unplug battery line.
Check battery, charger and other spare parts regularly.
If any problem, please fix it before playing.
Charging notification
For the first use, please charge 8-12 hours, or will damage the battery.
Plug charger DC line into charge hole first, then plug charger into socket.
Car can not be played when it charging.
Every time it charged, do not charge more than 20 hours.
It is normal that charger and battery warm (under 60°) during charging.
Do not charge if plug is wet, or will occur short-circuited.
Only use charger provided by manufacturer, or will damage charger and battery
or occur short-circuited.
If long time no use, please charge 1 time per month at least.
Charging steps are as follows:
Step 1: The charging hole is under the seat.
Step 2: Put the charger plug into the plug hole.
Step 3: Connect the charger to the power socket.
Warning: Car must be charged by adults only. Car is useless during charging
Maintenance and Service
Check battery, charger and other spare parts regularly. If any problem, please fix it before playing.
-
Use lubricating oil to care iron parts. Keep car away from fire and sunshine. Park it on the even place, not reversal or gradient.
-
Park it indoor and cover it with waterproof cloth.
-
Keep car away from fire, like stove or heater, or plastic may melt.
Keep away from flammable things, or may occur fire accident. -
Charge it after use and must be done by adults only. If long time no use, please charge it 1 time per month, in order to maintain battery.
-
Clean the vehicle with a dry cloth only. Do not use chemical solvent to wipe plastic parts. Do not wash it with water or play it when raining or snowing. Water will damage motor, electric system or battery.
-
Please turn power off after each use.
-
Only use charger provided by manufacturer.
-
Do not change car’s structure or electric line. Check job request some skills or under specialist’s guidance.