QAZQA CL-40 Industrial Dining Room I Dining Table Pendant Lamp Instruction Manual

: June 15, 2024
: QAZQA

Table of Contents

CL-40 Industrial Dining Room I Dining Table Pendant Lamp
Specifications:
Product Usage Instructions:
Safety Instructions:
Symbol Meanings:
Cleaning and Disposal:
Wiring Instructions:

CL-40 Industrial Dining Room I Dining Table Pendant Lamp

Specifications:

Model: Finn CL 40 Copper 104268
Socket Type: E27
Max Wattage: 40W
Working Voltage: 220-240V~
Dimmer Compatibility: Yes
Dimmable by Wall Switch: Yes
Protection Class: II
Minimum Distance from Lighted Objects: 0.5m

Product Usage Instructions:

Safety Instructions:

Before installing or using the product, carefully read and
follow these safety instructions:

The luminaires must be installed by authorized and qualified
technicians following electrical regulations.
Maintenance should only be done on the luminaire surfaces to
avoid moisture contact with electrical parts.
Always switch off the electrical supply before installation,
maintenance, or repair work.
Avoid installing exterior lighting during rain.
Maintain minimal separation distance from other objects and
ensure proper room around the fitting.
If unsure, consult a professional considering local
installation requirements.
Ensure clamping screws in electrical connections are tightened
adequately, especially with low voltage conductors.
Clean the luminaire with a dry cloth or brush, avoiding
solvents or abrasives and preventing dampness on electrical
components.
Refer to technical information available.

Symbol Meanings:

Understand the meanings of symbols used in the product:

IPXX: Indicates water-proof and dust-proof
level
Protection Class I: The fitting must be
earthed
Protection Class II: The fitting is double
insulated and does not require earthing
Protection Class III: The fitting is low
voltage

Cleaning and Disposal:

Properly clean and dispose of the luminaire:

Clean with a clean, dry cloth or brush. Do not use solvents or
abrasives.
The luminaire should not be disposed of with normal domestic
waste; take it to an electrical waste staging area.

Wiring Instructions:

Follow these guidelines when connecting wires:

Refer to symbols provided for wire connections.

FAQ:

Q: Can the luminaire be dimmed?

A: Yes, the luminaire can be used in combination with a dimmer
and can also be dimmed by a wall switch.

Q: What is the maximum wattage for this product?

A: The maximum wattage for this product is 40W.

(NL) Gebruikte symbolen (GB) S(DaKfe)tyBrPurgetceausytimonbso/le(rFR/ ()SSEy)mAbnoul.ae.nsdUatisliysmesbo/ l(eDrE/)(FVIe)rkwaeyntdeteyttesSyymmbboolilte//((ITP)LS) iSmtobsooliwuasnaetis/y(mESb)oSleim/ (bNoOlo)sBerumkptelesaydmosboler /
(CZ) Pouzvite symboly / (PT) Simbolos uilizados / (GR)

E27 Max.40W

20

Finn CL 40 Copper 104268
STEP 1

OFF

STEP 4

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl

FittinQ B.V.
55 Baker Street,
London, W1U7EU United Kingdom

SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference 1. The luminaires may only be installed by authorized and qualied technicians according the valid
regulations for electrical installation. 2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come
into contact with any areas of the terminal connections or voltage control parts. 3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution
box, before any installation, maintenance or repair work is undertaken. 4. Exterior lighting must not be installed during rain. 5. Take account of the minimal separation distance from other objects and the room required around the tting. 6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries
stipulate that lighting may be installed only by registered installers. 7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V
low voltage conductors. 8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical
components 9. Take account of all available technical information. 10.Meaning of symbols:
IPXX This icon indicates the level of water-proof and dust-proof
Protection Class I: the tting must be earthed

Protection Class II: the tting is doubled insulated and does not require earthing

III Protection Class III: the tting is low voltage

0.5m Minimum distance from lighted objects (meters)

The type of lamp and maximum size and wattage indicated in each lighting unit must not

Max.ø50mm GU10

be exceed; different items require different kind of light sources with different bulb icons

2Max.50W

220-240V~ The armature is designed to work only with the indicated voltage. Different items require 50Hz different working voltage.

The luminaire can be used in combination with a dimmer

3X The luminaire can be dimmed by wall switch
Light Angle
55º The reference light angle and light space of the luminaire
35cm²

This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste 11.Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.nl

FittinQ B.V.
55 Baker Street,
London, W1U7EU United Kingdom