ZEBRA TC7301 Handheld Computer Instruction Manual

: June 14, 2024
: ZEBRA

Table of Contents

ZEBRA TC7301 Handheld Computer
Product Usage Instructions
United States and Canada Regulatory
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRA TC7301 Handheld Computer

Specifications:

Brand: Zebra
Model: TC7301
Scanner Types: SE5500, SE4770
LED Indicator: Yes
Compliance: FCC, ISED, EEA, WEEE
Frequency Range: 630-680 nm (SE4770), 500-570 nm (SE5500)
Regulatory Compliance: FCC Part 15, ICES-003, Innovation, Science and Economic Development Canada
Country of Origin: Netherlands

Product Usage Instructions

Regulatory Compliance:
Ensure compliance with FCC and ISED regulations. The device must operate within the specified frequency range and maintain a minimum separation distance of 1.5 cm from the user’s body and nearby persons.

Co-located Statement:
Avoid co-locating the antenna with other transmitters within 20 cm unless approved in the FCC filing.

RF Exposure Requirements:
Operate the device indoors when using the 5150 to 5350 MHz frequency range. Keep a safe separation distance from the body and nearby individuals.

Compliance Labels:
The device complies with FCC Part 68 and ISED CS-03-Part 5 standards. It also meets the technical specifications of Innovation, Science, and Economic Development Canada.

FAQ:

What are the SAR levels for the TC7301?
The Specific Absorption Rate (SAR) for the TC7301 is specified at 2 W/kg for general exposure and 1.6 W/kg for localized exposure.
Can the device be used in France?
The device can be used in France, ensuring compliance with local regulations and standards.
Are there any restrictions on the device’s materials?
The device materials must comply with regulations, with limits set at 0.1 wt % for certain substances and 0.01 wt % for others.
How can I get support for the TC7301?
For warranty, support, and software downloads, visit zebra.com/support or contact entitlementservices@zebra.com.

United States and Canada Regulatory

Radio Frequency Interference Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada

Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003 (B)/NMB-003(B)
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

RF Exposure Requirements – FCC and ISED

The FCC has granted Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid.
To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 1.5 cm or more from a user’s body and nearby persons.

Co-located Statement

To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those already approved in this filling.
This device is marked HAC showing compliance with the applicable requirements of FCC Part 68 and ISED CS-03-Part 5.
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

United Kingdom Statement of Compliance

Zebra hereby declares that this radio equipment complies with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at: zebra.com/doc.

UK Importer:
Zebra Technologies Europe Limited
Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF