GLASSCRAFT Barn Rustic Rolling Doors Instruction Manual
- June 9, 2024
- GLASSCRAFT
Table of Contents
GLASS CRAFT Barn Rustic Rolling Doors
Installation Instruction
- IMPORTANT : Before you begin the installation of your barn door, please read through ALL of the manufacturer’s instructions.
- Failure to follow the proper installation procedures could result in the denial of warranty claims for any operational performance issues.
Dimension
- Determine the location on the wall for the rail, and use a LEVEL() to mark and pre-drill holes.
- a. Using a pencil, mark a line at the correct height (H+1-5/8), ensuring it is level
- b. Use a stud finder to locate the studs behind the drywall.
- (NOTE: I f you cannot find studs where the drill holes will go, a header board is recommended)
- C. Mark and pre-drill holes in the studs along line
- Install the rail using the screws, washers, and spacers provided.
parts
- Prepare the door by drilling the holes and attaching the rollers as indicated.
- Attach anti-jump discs to the top of the door (at least 1 inch from rollers), and rotate them toward the front of the door.
- Mount the door on the rail and rotate the anti jump discs toward the back of the door.
- Install 2-piece floor guide flush with edge of door opening and spaced from the wall so the door hangs correctly.
- Sliding the door from open to closed, position the stoppers to keep the door within the floor guide range.
- Slide both left and right stops to the desired locations on the rail, and tighten in place with the screws provided.
Face-mounted Rollers:
- Philmont
- Royal
- Slade
- Waggoner
- Vintage
Top-mounted Roller:
- Gage
- www.glasscraft.com
Documents / Resources
|
GLASSCRAFT Barn Rustic Rolling
Doors
[pdf] Instruction Manual
Barn Rustic Rolling Doors, Barn Doors, Rustic Rolling Doors, Barn Rolling
Doors
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>