FINNY SK15 Wireless Musical Headphone Headband Instruction Manual

FINNY SK15 Wireless Musical Headphone Headband

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Class: B digital device
• RF Radiation Exposure: Must be operated with a minimum distance of 5mm between the radiator and the body

Product Usage Instructions

1. FCC Warning:
   This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

   • This device may not cause harmful interference.
   • This device must accept any interference received, including interference that may cause undesired operation.

2. Information to User:
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3. FCC RF Radiation Exposure Statement:

4. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

5. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.

FAQ

• Q: What should I do if I encounter interference while using the device?
  A: If you experience interference, try adjusting the placement of the device to minimize potential sources of interference. Ensure that there are no other antennas or transmitters in close proximity to the device.

• Q: Can I modify the device in any way?
  A: No, any changes or modifications not approved by the responsible party could impact the compliance and operation of the equipment, voiding your authority to operate it.

WIRELESS MUSICAL HEADPHONE HEADBAND

Thank you for purchasing this Wireless Musical Headphone Headband. Please read these instructions carefully before use.

Intended Use

• The Wireless Musical Headphone Headband is suitable for Bluetooth compatible device like mobile phones. Users can listen to music and conduct phone calls hands free.
• The product is for personal use only and is not intended for commercial  applications.

Safety Instructions

• Before using the product, please read the instructions through carefully and keep them for future reference.
• If you pass the product on to third party, it must always be accompanied by this User Manual.

Dangers of Injury

• Keep the product and the package away from children and animals, as they can swallow small parts.
• Supervise children using the product. It is not a toy.
•  Always maintain a gap of at least 10 cm between the headphones and a pacemaker or an implantable cardioverter defibrillator (ICD) as the product generates magnetic fields.

Dangers of Fire and Explosion

• Caution! Do not expose the headphones to any high temperatures over 70’C { like hair dryer, heating, prolonged sunlight etc.,) The battery inside of the headphones may overheat and explode as a result.
• Only charge up the headphones in an ambient temperature of from 10’C to  40″C.
• Do not crush or pierce the battery! Do not expose the battery to high pressure, as this may cause an internal short-circuit and overheating. The headphones and the battery must not be taken apart, thrown into a fire, immersed in liquids or short circuited.
• If the headphones are not used for a prolonged period of time, recharge it regularly (roughly every 3 months).

Interface

1. Volume Down/Previous Song
2. Play/Pause/Answer/Hang Off/Redial
3. Volume Up/Next Song Noice Assistant
4. LED Status Light/Microphone
5. USB Charging Port
6. Bluetooth Controller Box

How to Use Bluetooth

Pair with a Bluetooth Device
Before you can use this product through Bluetooth, it needs to be paired with your device.

1. Long Press the button for 3 seconds until the LED Status Light [4] starts to flash red and blue alternately.
2. Switch on Bluetooth on your phone or other Bluetooth enabled device.
3. Search and select “Musical Headband” from the list of found devices.
4. If a pass code is asked for, enter “0000”.
5. After paired successfully, only the blue light flashes slowly.
6. When powered on next time, it will search for and attempt to connect with the last paired device automatically.

Pair with a New Bluetooth Device
Follow below steps to pair with a new Bluetooth device:

1. Make sure the headphone is disconnected with the previous paired device.
2. Follow “How to Pair with a Bluetooth Device” instructions from step 1. NOTE: To save power, the headphone will be powered off automatically if there’s no Bluetooth connection for 3 minutes.

Playing Music

1. Play/Pause: Short Press the  tell button to play or pause music.
2. Adjust Volume: Long Press the + button or – button to raise or lower the volume.
3. Music Selection: Short Press  – the button or + button to select previous song or next song.
   NOTE: Play/Pause and Music Selection functions will only work on devices which support Bluetooth profile AVRCP.

Call-Handling

1. Answer a call: When a call coming, it will play a ring tone. Short Press the  , button to answer. During the call, you can increase or decrease the volume by Long Press or  button.
2. Reject a call: When a call coming, it will play a ring tone. Long Press the tll button for 1 seconds to reject it.
3. End a call: During a call, Short Press the¢, button to end a call.
4.  Re-dial: Double Press the.:, button in quick succession to redial the last called phone number.

Activate/Deactivate SIRI

1. Activate SIRI: Double Press the + button in quick succession to activate SIRI on iOS device.
2. Deactivate SIRI: Double Press + button to deactivate SIRI.
3.  Talk through Microphone (4] directly to communicate with SIRI, it’s the same effect with talking to iOS device.

How to Charge
Make sure the headphone is powered off, take out the Charging Port [5) from the headband. Then:

1. Connect the USB Charging cable to the Charging Port [SJ and the other end to a power source like PC or mains charger.
2. The LED Status Light [4] will turn to red whilst charging. It will turn to blue as soon as the battery is fully charged.

NOTE:

1. lt will take approx. 2-3 hours to be fully charged.
2. lf the product is under using, it will stop working when charging.

LED Indicators

Troubleshooting

If you cannot connect the product with your device, please try the following:

1. Ensure the product is charged, switched on, paired with and connected to your device.
2. Check if the product is in the effective range from your device and there’s no obstructions like walls or other electronics devices between the product and the device.
3. Only one device can be connected with the product at a time, ensure there’s no other Bluetooth device already connected with the product.
4. If you receive an intermittent signal, please ensure the product is in the effective range from your device.

Washing Guidelines

Please remove the electronics from the Headband before washing. Hand wash only.

Specifications

•  BT Version: VS.2
• Frequency: 2.402 Ghz – 2.480Ghz
• Frequency Response: 20Hz – 20KHz
• Transmission Range: 20M / 66FT
• Rated Power: RMS 10mWX2
• Speaker Unit: 320 120mm
• Battery: 3.7V 300mAh Rechargeable Li-polymer
• Battery Charge Time: 2-3 Hours

Package Contents

• Headband with Headphones
• USB Charging Cable
• User Manual

WARNING: Avoid excessive volumes, particularly over extended periods or in the case of frequent use. Listening to music at maximum volume for prolonged periods can lead to hearing damage. It’s best to avoid extreme volume when using this product, especially for extended periods. For your own safety, please be aware of your surroundings when using this product.

FCC Warning

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>