SPACETOUCH COSMO Full Body Device User Guide
- June 12, 2024
- SPACETOUCH
Table of Contents
COSMO Full Body Device
“`html
Technical Specifications
- Cosmo weight: 6.1KG / 13.44 LBS
- Product measurement: 58 X 30 X 58CM / 22.8 X 11.8 X 22.8IN
- Input power: 100-240V
How To Use Cosmo
Turning the Device On
-
Unfold the device and place it on a safe surface.
-
Connect the Cosmo to a power outlet using the power bank and
two wires. -
Connect the first wire to the power adapter and electrical
outlet. -
Connect the second wire to the power bank and device.
-
When properly connected, the power adapter will light up and
the device will beep and blink, signaling that your device is
connected to power and is ready to use. Only use the original cable
provided as other cables may damage the device. -
To turn the device on, gently tap the power icon. Wait for 3
seconds to load and then select your treatment.
Using the Device
-
Start by turning on the heat if required. If not, proceed to
the next step of selecting the duration of treatment. -
Adjust the timer via the plus or minus icons. Your icon will
lock.
Frequently Asked Questions (FAQ)
Q: Can I use Cosmo without protective glasses?
A: No, it is recommended to always use protective glasses while
using Cosmo to protect your eyes from potential harm.
Q: How often should I use Cosmo for optimal results?
A: The frequency of use depends on your skin condition and
treatment plan. It is best to consult with a skin specialist for
personalized advice.
Q: Can Cosmo be used on all skin types?
A: Cosmo is suitable for most skin types, but it is advisable to
perform a light sensitivity test before regular use to ensure
compatibility with your skin.
Q: Is it safe to adjust the wavelength manually during
treatment?
A: Yes, Cosmo allows manual adjustment of the wavelength for a
more customized treatment experience. Follow the user manual
instructions carefully for safe usage.
“`
COSMO FULL BODY DEVICE
spacetouch.com
COSMO USER GUIDE
HELLO!
Thank you for purchasing Cosmo and welcome to the Spacetouch family! There is
no better investment than investing in yourself! You are now part of a growing
community of millions of people who use advanced LED skincare therapy to
achieve flawless skin. As you unbox your new device, take a few moments to
review the manual and become familiar with its features before using your
Cosmo device. The instructions provide important details on how to safely
operate your device. Spacetouch is committed to providing you with the best
skincare experience possible. If you have any questions or concerns, our
friendly and knowledgeable customer service team is here to help. You can
reach us at Service@Spacetouch.com.
TABLE OF CONTENTS
1 What Is Cosmo?
01
2 How Does It Work?
02
3 Technical Specifications
05
4 Compliance
05
5 Package Contents
05
6 How To Use Cosmo
06
7 Treatment Index
10
8 Contraindications, Warnings, and Precautions
25
9 Light Sensitivity Test
26
10 Limited Lifetime Warranty
26
11 Register Your Device
27
WHAT IS COSMO?
Cosmo is a revolutionary full-body LED device that offers a range of features
to make at-home LED treatments more efficient and effective than ever before.
With its patented foldable and portable design, Cosmo is easy to take with you
wherever you go, allowing you to experience the benefits of LED light therapy
no matter where you are. With a width of 23 inches and 360 LED and infrared
points, Cosmo is the most potent and efficient full-body LED device to be used
on any area of the body. Cosmo offers four light treatments – red, blue,
green, and yellow wavelengths – all of which can be used on your face, neck,
and body. Each mode of treatment targets a different set of concerns, allowing
you to customize your LED light therapy experience to meet your specific
needs. One of the most innovative features of Cosmo is its flash mode, which
uses AI technology to analyze your skin while you use the device and adjust
the wavelength of the light during your treatment. This ensures that you get
the most effective treatment possible, tailored to your skin’s unique needs.
Designed by plastic surgeons and dermatologists in Germany, Cosmo incorporates
multiple technologies into one treatment to target a wide array of concerns so
you can experience the benefits of LED light therapy from the comfort of your
own home. infectious skin disease, either do not use or consult with your
doctor before use.
01
HOW DOES IT WORK?
Light therapy is a non-invasive treatment that utilizes light at precise
wavelengths to penetrate the skin’s surface without causing any damage. Light
therapy was originally developed by NASA for astronauts who could become
injured or ill on long-term space missions, is used today as a safe and
natural method of treatment for a variety of skin and medical conditions. The
light stimulates natural chemical reactions in the skin cells, triggering the
rejuvenation and healing processes. Developed by leading plastic surgeons and
dermatologists, Cosmo is a home-use light device that effectively addresses a
plethora of various skin concerns via its 5 available modes of treatment and 1
add-on setting:
RED LIGHT SETTING
The red light setting is designed to reduce signs of aging. From the age of 22
onwards, our skin loses between 1-2% of its collagen every year. Collagen
plays a critical role as the “glue” between our skin layers, imparting a plump
appearance to our skin. As the collagen dwindles, our skin becomes drier and
less supple, leading to the emergence of visible lines and wrinkles on the
surface of the skin. Furthermore, factors like sleep deprivation, dehydration,
sun exposure, and smoking can exacerbate these aging effects. The red light
setting is designed to assist the reproduction of cells, collagen, and fiber
and reaches the hypodermis level, the deepest and thickest layer of the skin.
Consistent use of healthy lifestyle choices and red light LED treatment can
effectively halt the reduction of collagen as we age and in some cases, even
boost the body’s natural collagen production. Therefore, it’s crucial to start
utilizing red LED light therapy as early as possible.
02
BLUE LIGHT SETTING
The blue light setting is designed to improve skin texture and reduce
sebaceous hyperplasia (enlarged oil glands). It can help with reducing the
appearance of actinic keratoses (sun spots), acne, and even acne scarring.
This treatment can be used in tandem with other products as part of an acne
treatment plan. In addition to its cosmetic benefits, blue light therapy has
been shown to promote the synthesis of protein and bone collagen, and it can
also help with whitening skin and teeth. Blue light therapy is also effective
in managing neonatal jaundice, skin conditions such as allergy-based and oily
skin, and the relaxation of nerves. It can also provide pain relief and is
used for the clinical treatment of goiter, chronic heart disease, insomnia,
and menopausal syndrome.
GREEN LIGHT SETTING
The green light setting is designed to stimulate collagen production, reduce
inflammation, and improve energy levels. In addition to its cosmetic benefits,
green light therapy has been used clinically to treat various health
conditions. It has been shown to be effective in improving asthma symptoms,
relieving climacteric syndrome, and treating nerve numbness and kidney
diseases. It has also been used to manage diabetes and digestive tract
diseases, making it a valuable treatment option for those seeking to improve
their overall health.
YELLOW LIGHT SETTING
The yellow light setting is designed to treat skin redness and flushing,
rosacea, UV radiation damage and reduce the appearance of telangiectasias
(ruptured blood vessels) on the nose and face.
03
CYCLE SETTING
The cycle setting is designed to provide the ultimate in-skin treatment by
combining all four lights (blue, red, green, and yellow) to rejuvenate and
heal all skin tissues. This is a fantastic option for those wanting to target
multiple concerns in a single treatment and improve general health and well-
being. This mode is set automatically to 30 minutes, with adjustable timing to
what you wish or your skin specialist recommends.
FLASH SETTING
The flash setting is a revolutionary AI feature that you can add on to all
available treatments. This innovative setting utilizes light pulses to analyze
your skin every 15 seconds, automatically adjusting the light wavelength
throughout your treatment. This ensures that you receive a personalized
treatment that responds to the current condition of your skin, making LED
light therapy more effective and safer than ever before.
If you would like to take a more hands-on approach to your treatment, Cosmo
allows you to manually adjust the wavelength of your treatment by adjusting
the heat. This hands-on approach was once only available in clinics, but now
you can have that same level of customization from the comfort of your own
home. With this feature, you have the freedom to adjust the intensity and
wavelength of your treatment to suit your unique needs.
04
TECHNICAL SPECIFICATIONS
Cosmo weight: 6.1KG / 13.44 LBS Product measurement: 58 X 30 X 58CM / 22.8 X
11.8 X 22.8IN Input power: 100- 240V
COMPLIANCE
All Spacetouch LED devices are approved by the U.S. Food and Drug
Administration (FDA) and comply with the international standard of basic
safety for medical devices IEC 60601 and with the relevant collateral and
particular standards for non-laser light source medical equipment for home use
IEC 60825-1 and IEC 62471 Photobiological Safety of Lamps and Lamp Systems.
Spacetouch devices also conform to the application of risk management to
medical devices ISO 14971, and biological evaluation of medical devices in
tests for invitro cytotoxicity ISO 10993-5 and irritation and skin
sensitization ISO 10993-10.
PACKAGE CONTENTS
User manual VIP warranty card Cosmo LED device Power adapter Protective
glasses Two wires
05
HOW TO USE COSMO
TURNING THE DEVICE ON
Unfold the device and place it on a safe surface. Then connect the Cosmo to a
power outlet using the power bank and two wires. Connect the first wire to the
power adapter and electrical outlet. Then connect the second wire to the power
bank and device. When properly connected the power adapter will light up and
the device will beep and blink, signaling that your device is connected to
power and is ready to use. Only use the original cable provided as other
cables may damage the device.
To turn the device on, gently tap the power icon. Wait for 3 seconds to load
and then select your treatment.
USING THE DEVICE
Start by turning on the heat if required. If not, proceed to the next step of
selecting the duration of treatment. Adjust the timer via the plus or minus
icons. Your icon will lock
06
once the duration is selected. To reset the selected timer turn the device on
and off using the power icon to reset the treatment. Lastly, select between
the 5 modes of treatment by tapping on the relevant icons. This will result in
the LED light turning on, indicating that treatment has started. You can also
choose to add on the flash setting if desired by tapping the flash icon. Once
all required modes are selected, sit back, relax, and enjoy your customized
treatment! When treatment is complete, the device will automatically turn off.
To manually turn the device off, hold the button down until the lights turn
off. Finish with your favorite moisturizer or serum for maximum results. To
clean the device, wipe the device with a damp cloth or alcohol.
07
LIGHT THERAPY GUIDE
We have detailed treatment instructions from our worldwide specialists
TREATMENT INDEX
Scars Stretch Marks & Spider Veins Cellulitis Rosacea Eczema Psoriasis
Wrinkles Acne
11
Pigmentation
12
Solar Keratoses (Sun Spots)
13
Erythema (Redness)
14
Sagging Skin
15
Neck Pain
16
Hair Growth
17
18
19 20 21 22 23 24
10
SCARS
SEAN MERLING
TARGET Scars
DOSE 60 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LENGTH 4 Times per week for 6 months
DIRECTION
This treatment contains two steps, one using the red LED light and the other
using the green LED light. Connect the Cosmo to a power outlet and place it on
a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 50 degrees Celsius and the timer to 40 minutes, and select the
red mode. Place the device above the desired treatment area for 40 minutes.
Once the red LED light treatment is complete, set the temperature to 50
degrees Celsius again and the timer to 20 minutes. Select the green mode and
place it above the same treatment area for 20 minutes. After completing both
treatments, apply your favorite cream or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 50 degrees Celsius
TIMER 40 & 20 Minutes
LIGHT Red & Green
11
STRETCH MARKS & SPIDER VEINS
DR. MICHAEL MCGEE
TARGET Stretch marks & spider veins
DOSE 60 Minutes per treatment
AREAS OF USE Body and all areas of concern
TREATMENT LENGTH 4 Times per week for 3 months
DIRECTION
This treatment contains two steps, one using the red LED light and the other
using the yellow LED light. Connect the Cosmo to a power outlet and place it
on a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 50 degrees Celsius and the timer to 40 minutes. Select the Red
Mode and place the device above the desired treatment area for 40 minutes.
Once the red LED light treatment is complete, set the temperature to 50
degrees Celsius again and the timer for 20 minutes. Select the yellow mode and
place the device above the same treatment area for 20 minutes. After
completing both treatments, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 50 degrees Celsius
TIMER 40 & 20 Minutes
LIGHT Red & Yellow
12
CELLULITIS
DR. JANA BELVIEW
TARGET Cellulitis
DOSE 30 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 5 Times per week for 3 months
DIRECTION
This treatment utilizes red light LED therapy and heat. Connect the Cosmo to a
power outlet and place it on a safe, flat surface. Tap the power icon to turn
on the device. Set the temperature to 55 degrees Celsius and the timer to 30
minutes. Select the red mode and place the device above the desired treatment
area for 30 minutes. After completing the treatment, apply your favorite cream
or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 55 degrees Celsius
TIMER 30 Minutes
LIGHT Red
13
ROSACEA
DR. MICHAEL MCGEE
TARGET Rosacea
DOSE 45 Minutes per treatment
AREAS OF USE Face and all areas of concern
TREATMENT LEGTH 4 Times per week for 3 months
DIRECTION
This treatment utilizes yellow light LED therapy and heat. Connect the Cosmo
to a power outlet and place it on a safe, flat surface. Tap the power icon to
turn on the device. Set the temperature to 40 degrees Celsius and the timer to
45 minutes. Select the yellow mode and place the device above the desired
treatment area for 45 minutes. After completing the treatment, apply your
favorite cream or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 40 degrees Celsius
TIMER 45 Minutes
LIGHT Yellow
14
ECZEMA
DR. MICHAEL MCGEE
TARGET Eczema
DOSE 40 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 3 Times per week for 3 months
DIRECTION
This treatment contains two steps, one using the red LED light and the other
using the yellow LED light. Connect the Cosmo to a power outlet and place it
on a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 40 degrees Celsius and the timer to 25 minutes. Select the red
Mode and place the device above the desired treatment area for 25 minutes.
Once the red LED light treatment is complete, set the temperature to 40
degrees Celsius again and the timer for 15 minutes. Select the yellow mode and
place the device above the same treatment area for 15 minutes. After
completing both treatments, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 40 & 40 degrees Celsius
TIMER 25 & 15 minutes
LIGHT Red & yellow
15
PSORIASIS
ROLANDE FRANK
TARGET Psoriasis
DOSE 35 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 5 Times per week for 3 months
DIRECTION
This treatment utilizes red light LED therapy and heat. Connect the Cosmo to a
power outlet and place it on a safe, flat surface. Tap the power icon to turn
on the device. Set the temperature to 40 degrees Celsius and the timer to 35
minutes, and select the red mode. Place the device above the desired treatment
area for 35 minutes. After completing the treatment, apply your favorite cream
or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 40 degrees Celsius
TIMER 35 Minutes
LIGHT Red
16
WRINKLES
DR. ACHIM LEUTH
TARGET Wrinkles
DOSE 60 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 3 Times per week for 6 months
DIRECTION
This treatment contains two steps, one using the red LED light and the other
using the blue LED light. Connect the Cosmo to a power outlet and place it on
a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 60 degrees Celsius and the timer to 40 minutes. Select the red
Mode and place the device above the desired treatment area for 40 minutes.
Once the red LED light treatment is complete, set the temperature to 60
degrees Celsius again and the timer for 20 minutes. Select the blue mode and
place the device above the same treatment area for 20 minutes. After
completing both treatments, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 60 & 60 degrees Celsius
TIMER 40 & 20 minutes
LIGHT Red & Blue
17
ACNE
ROLANDE FRANK
TARGET Acne
DOSE 45 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 4 Times per week for 3 months
DIRECTION
This treatment contains two steps, one using the red LED light and the other
using the blue LED light. Connect the Cosmo to a power outlet and place it on
a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 50 degrees Celsius and the timer to 30 minutes. Select the red
Mode and place the device above the desired treatment area for 30 minutes.
Once the red LED light treatment is complete, set the temperature to 50
degrees Celsius again and the timer for 15 minutes. Select the blue mode and
place the device above the same treatment area for 15 minutes. After
completing both treatments, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 50 & 50 degrees Celsius
TIMER 30 & 15 minutes
LIGHT Red & Blue
18
PIGMENTATION
DR. JANA BELVIEW
TARGET Pigmentation
DOSE 60 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 3 Times per week for 3 months
DIRECTION
This treatment contains two steps, one using the blue LED light and the other
using the green LED light. Connect the Cosmo to a power outlet and place it on
a safe, flat surface. Tap the power icon to turn on the device. Set the
temperature to 60 degrees Celsius and the timer to 30 minutes. Select the blue
Mode and place the device above the desired treatment area for 30 minutes.
Once the blue LED light treatment is complete, set the temperature to 60
degrees Celsius again and the timer for 30 minutes. Select the green mode and
place the device above the same treatment area for 30 minutes. After
completing both treatments, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 60 & 60 degrees Celsius
TIMER 30 & 30 minutes
LIGHT Blue & Green
19
SOLAR KERATOSES (SUN SPOTS)
DR. MICHAEL MCGEE
TARGET Sunspots
DOSE 60 Minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 5 Times per week for 3 months
DIRECTION
This treatment contains three steps of LED light- blue, green, and red.
Connect the Cosmo to a power outlet and place it on a safe, flat surface. Tap
the power icon to turn on the device. To start, set the temperature to 55
degrees Celsius and the timer to 20 minutes. Select the blue mode and place
the device above the desired treatment area for 20 minutes. Once the blue LED
light treatment is complete, set the temperature to 55 degrees Celsius again
and the timer for 20 minutes. Select the green mode and place the device above
the same treatment area for 20 minutes. Once the green LED light treatment is
complete, set the temperature to 55 degrees Celsius again and the timer for 20
minutes. Select the red mode and place the device above the same treatment
area for 20 minutes. After completing all treatments, apply your favorite
cream or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 55, 55 & 55 degrees Celsius
TIMER 20, 20 & 20 minutes
LIGHT Blue, Green & Red
20
ERYTHEMA (REDNESS)
DR. ACHIM LEUTH
TARGET Redness
DOSE 45 minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 3 Times per week for 3 months
DIRECTION
This treatment utilizes yellow light LED therapy and heat. Connect the Cosmo
to a power outlet and place it on a safe, flat surface. Tap the power icon to
turn on the device. Set the temperature to 40 degrees Celsius and the timer to
45 minutes, and select the yellow mode. Place the device above the desired
treatment area for 45 minutes. After completing the treatment, apply your
favorite cream or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 40 degrees Celsius
TIMER 45 minutes
LIGHT Yellow
21
SAGGING SKIN
DR. JANA BELVIEW
TARGET Sagging skin
DOSE 75 minutes per treatment
AREAS OF USE Face, body, and all areas of concern
TREATMENT LEGTH 2 Times per week for 3 months
DIRECTION
This treatment utilizes green light LED therapy and heat. Connect the Cosmo to
a power outlet and place it on a safe, flat surface. Tap the power icon to
turn on the device. Set the temperature to 60 degrees Celsius and the timer to
60 minutes, and select the green mode. Place the device above the desired
treatment area for 60 minutes. Once the first round of green LED light
treatment is complete, set the temperature to 40 degrees Celsius again and the
timer for 15 minutes. Place the device above the same treatment area. After
completing the treatment, apply your favorite cream or one recommended by a
specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 60 & 40 degrees Celsius
TIMER 60 minutes & 15 minutes
LIGHT Green
22
NECK PAIN
SEAN MERLING
TARGET Neck pain
DOSE 60 Minutes per treatment
AREAS OF USE Neck
TREATMENT LEGTH 4 Times per week for 2 months
DIRECTION
This treatment utilizes red light LED therapy and heat. Connect the Cosmo to a
power outlet and place it on a safe, flat surface. Tap the power icon to turn
on the device. Set the temperature to 60 degrees Celsius and the timer to 60
minutes. Select the red mode, lie flat on your stomach, and place the device
around your neck for 60 minutes. After completing the treatment, apply your
favorite cream or one recommended by a specialist.
IMPORTANT When placing the device over the facial area, it is essential to
wear the protective glasses that come with the device to avoid damage to your
eyes.
TEMPRATURE 60 degrees Celsius
TIMER 60 minutes
LIGHT Red
23
HAIR GROWTH
SEAN MERLING
TARGET Hair growth
DOSE 30 minutes per treatment
AREAS OF USE Head
TREATMENT LEGTH 3 times per week for 3 months
DIRECTION
This treatment utilizes red light LED therapy and heat. Connect the Cosmo to a
power outlet and place it on a safe, flat surface. Tap the power icon to turn
on the device. Set the temperature to 40 degrees Celsius and the timer to 30
minutes. Select the red mode, lie down, and place the device around your scalp
for 30 minutes.
IMPORTANT When placing the device over the facial area or head, it is
essential to wear the protective glasses that come with the device to avoid
damage to your eyes. Do not wash your hair for 2-3 hours prior to treatment.
TEMPRATURE 40 degrees Celsius
TIMER 30 minutes
LIGHT Red
24
CONTRAINDICATIONS, WARNINGS, AND PRECAUTIONS
CONTRAINDICATIONS
DO NOT use the device if you are pregnant DO NOT use the device while
showering, bathing or swimming DO NOT drop the device or subject it to
excessive force DO NOT continue to use the device if you develop a skin
irritation; consult a doctor if skin irritation persists DO NOT use the device
if you suffer from Lupus erythematosus, Albinism, photosensitive disorders,
photosensitive eczema, or any medications that can cause photosensitivity
unless you have consulted with a doctor DO NOT use the device if you suspect
that it is damaged or needs repair. Instead, contact Spacetouch for a
replacement
WARNINGS
DO NOT use the device without removing all skincare products and/or makeup
prior to treatment. Some ingredients in these products may cause light
sensitization or reduce the efficiency of the treatment DO NOT tamper with or
attempt to modify the device in any way. Modifying any Spacetouch device will
result in a voided warranty DO NOT continue using the device if it begins to
overheat or feel uncomfortably warm on your skin, turn off it immediately and
contact customer support DO NOT continue using the device if you encounter
prolonged skin redness or discomfort that lasts for more than 2 hours after
treatment. This could be due to light sensitivity or another condition. Please
consult your doctor for advice
25
PRECAUTIONS
Before using Cosmo, we highly recommend that you conduct a light sensitization
test. Stop using the device if you experience any adverse effects from the
treatment and consult with your doctor if you have any concerns about the
product and/or treatment.
LIGHT SENSITIVITY TEST
Step 1: Power the device and place it on your clean face. Step 2: Use the
device for one round of treatment. The device will turn off once the treatment
is complete. At any point, if you experience uncomfortable heat or discomfort,
stop using the device immediately. Step 3: Wait for 24 hours before using the
device again. If you experience pain, discomfort, or redness that lasts for
more than 2 hours, please consult a doctor for advice as you might have light
sensitivity.
LIMITED LIFETIME WARRANTY
The lifetime warranty for Spacetouch devices guarantees coverage for
manufacturing defects. To activate the warranty, you must register your device
on our website, www.spacetouch.com, within 7 days of receiving the order.
Failure to register the device correctly and timely will invalidate the
warranty. Please note that the warranty does not cover damages caused by
intentional or unintended misuse, use of the device for purposes other than
its intended use, or any damage beyond normal wear and tear. Certain
restrictions may apply.
26
Register your device by scanning the QR code below
@spacetouch
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>