Raoping Ruhu Technology N272U RGB Light Strip Controller User Manual
- June 6, 2024
- Raoping Ruhu Technology
Table of Contents
**Raoping ** User Manual
Technical Parameter:
Product category
Control principle
APP software type
Language
Mobile version requirements
Input voltage
Maximum power
Control points
Led driver type
Scope of application
Working temperature Effective control distance Certification| LEDController
BLUETOOTH5.0
ZENGGE
Chinese, English, Japanese, German
Android6.0 or IOS11 or higher
DCSV
144W 2048
SPI:W528128,SM16703,SM16704,
WS2811,UCS1 903,SK6812,
INK1003,UCS2904B
RGBIC light bar
-20-+55°C 20m Visual distance 20m CE,RoHS,FCC
---|---
| Static Color Switching| 7 kinds of color static switching
(Red/White/Green/Light Blue/Dark Blue/Purple/White)
---|---|---
| 3 colors Static Colorful| 3 colors static switching (Red/Blue/Green)
| 7 Colors Static Colorful| 7 kinds of color static switching
(Red/Orange/White/Green/ Light Blue/Dark Blue/Purple)
| Loop Mode| Light cycle switching
| Mode Increase/Decrease| 100 built-in modes affect increases or decreases
| Left/Right Meteor Mode| Left Meteor Mode: Lights fade from right to left.
Right Meteor Mode: Lights fade from left to right.
| Run left/right mode| Run Left Mode: Lights cycle from right to left Run
Right Mode: Lights cycle from left to right
| Rainbow Streaming Mode| 7 colors flow by
| Accumulation Mode| 7 color overlays
| Opening/Closing Mode| Closing: Lights run from both sides to the middle at
the same time Opening: The lights run from the middle to both sides at the
same time
| Scene Mode 1-4| Press and hold for 2 seconds to record the effect of the
current mode, short press next time to trigger
| Jump/Fade/Strobe/Stream| The light moves with the outside music according to
the mode 1-4 effect change
Remark:
- Scene mode can only record one custom color.
- Remote control code matching function: power on the device, press the “ON” button for 5 seconds, the device flashes slowly, it means the code matching is successful Remote control clearing function: When the device is powered on, press the “OFF” button for 5 seconds, the device flashes quickly, indicating that the clearing is successful.
How to set the IC model and IC numbers:
Long press the device and click on “LED Strip Setting” to set the IC model, Wiring and Sorting, Number of points, Number of segment(Total number of points can not exceed 300 in each segment and total LED chip’s quantity can not exceed 2048). On music mode, the total number of points in each segment and the total number of segments should be less than 150 points and 64 segments, the total LED Chip’s quantity should be less than 960.
| 
---|---
Detailed introduction of APP functions
a) Fixed Mode
10 fixed modes are built-in, can change foreground and background color,
adjust brightness, speed and direction freely.
b) Rim Mode
100 patterns of change, slide the ring to select pattern effect, and slide ”
*” or “P ” for overall pattern effect brightness or speed settings. Click on
“AUTO” to enter cycle mode or click on the heart icon to mark the favorite
effect.
c) DIY Mode
Customized your own effects, click on”+” to choose your favorite effect and
color then save it, now you can enjoy your own light effects at any time.
| 
---|---
d) Musk Mode
- In the Light Screen Mode, you can choose the falling color, column color, sensitivity, and brightness, which can be played circularly to achieve a more beautiful light effect.
- In the LED Strip Mode, you can select the brightness and sensitivity. There are two ways to input the audio signal on the controller, built-in APP Microphone and Device Microphone.
e) Multicolor function
- Can set each IC separately and set the lights with different modes.
- Optional dynamic modes for color lump gradient or mixed colors gradient: Static, Running Water, Strobe, Jump, Breathing
| 
---|--- - The area where the camera is aimed at the coloring area, and the light color will be changed accordingly.
f) Timer function
Smart lights automatically come on and off at given times through the timer
function.
When setting the
timer switch, you can select the color or dynamic mode and adjust the
brightness and speed freely.
g) Delay on-off function:
The lighting delay on/off time can be set according to personal preference.
ATTENTIONS
- Please use the product in a dry environment.
- Please use the input voltage at 5.24V DC voltage, must not connect into 220V AC directly.
- The product is requested a common anode connection. The wrong connection will cause a malfunction
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
https://faqsys.magichue.net:4489/wifi/page/download/ZGBLE02