Shenzhen Qingfen Tingxiu Information Technology Co Ltd 2BB7B-T8PLUS Mini PC User Manual
- June 12, 2024
- Shenzhen Qingfen Tingxiu Information Technology Co Ltd
Table of Contents
Shenzhen Qingfen Tingxiu Information Technology Co Ltd 2BB7B-T8PLUS Mini
PC
Specifications
- Model: XYZ-2000
- Dimensions: 10in x 5in x 3in
- Weight: 2 lbs
- Power Source: AC adapter
- Material: Plastic
Product Usage Instructions
- Setting Up:
- Before using the product, ensure that it is placed on a flat, stable surface near a power outlet.
- Powering On:
- Connect the AC adapter to the power port on the product and plug it into a power outlet. Press the power button to turn on the device.
- Operation:
- Follow the instructions displayed on the screen to navigate through the product’s menu and select your desired settings or options.
- Maintenance:
- Regularly clean the product with a soft, damp cloth to remove any dust or dirt. Avoid using harsh chemicals or abrasive materials that may damage the surface.
FAQs
- Q: What should I do if the product stops working suddenly?
- A: Check the power connection and ensure that the power outlet is functioning. If the issue persists, contact customer support for assistance.
- Q: Can I use the product outdoors?
- A: It is recommended to use the product indoors to prevent exposure to extreme weather conditions that may affect its performance.
PRODUCT INFORMATION
User Manual
- Dear users: Thank you for using this product. For your safety and benefit,
- Please read this product manual and all the accompanying materials carefully before using the product!
Disclaimer:
- Please make sure to use the original power supply, and our company will not assume any responsibility for any problems or failures caused by any third-party adapter.
- Users can use music videos, pictures and software provided by third parties, but we do not assume any responsibility for copyright issues or software failures.
- If the product breaks down, we will strictly abide by the warranty clauses, but we will not assume any responsibility for any property loss or economic loss that may be caused during use.
- The equipment is supplied with built-in software at the factory, which can be used after actual testing. However, if it is deleted or not deleted when looking for compatibility or other issues, it will not incur any impact on the machine. Please note that it is not an issue related to product quality.
- The company reserves the right to improve the product. If there is any change in product specification and design, no further notice is required! Please refer to the real object.
Quick Installation
Packing List
Installation of VESA bracket
Tips and FAQ
- Turn off your Mini PC
- If your Mini PC does not respond, press the power button for at least (4-6) seconds until your Mini PC is turned off.
- Boot into the system for the first time
- When you start up your PC for the first time, you will be guided to configure your Windows operating system.
- Start up your Mini PC for the first time: Press the PC’s power button. Wait for a few minutes until the installation interface appears.
- Step 1: Select language/country (region)
- Step 2: Select the inputting method, and click confirm
- Step 3: Select the second inputting method, which can be “skipped”
- Step 4: Networking: After selecting wifi, enter the password to connect it. Or choose to plug a network cable for connection. (Networking will be updated automatically, and the update process will stay on an interface for a long time, which prolongs the start-up time. (Skipping network connections is strongly recommended)
- Step 5: Accept License Agreement
- Step 6: Set User Name and Password Once the installation process is complete, the desktop will appear.
- Connect WiFi
- Connect Wi-Fi. Connect the PC to the Wi-Fi network using the following steps.
- Select the/icon from the taskbar.
- Click the wif icon to turn on the wi—f.
- Select an access point in the list of available Wi-Fi connections. Select one of the connections to start the network connection.
- Note: You may be prompted to enter a security key to activate a Wi-Fi connection.
- Enter the BIOS setting
- The BIOS (Basic Input/ Output System is the first software loaded when the Mini PC starts.
- Enter Bios: Click the “Del” or “ESC” key.
- Under normal circumstances, the default BIOS settings apply in most cases to ensure optimum performance. Do not change the default BIOS settings. Except for the following situation. (You have installed new system components that require further BIOS settings or updates.)
- Warning! Inappropriate BIOS settings may cause instability or startup failure. We strongly recommend that you only change the BIOS settings with the help of technical service personnel.
Precautions
- Please take extra care when executing operations that may cause damage or loss of documents.
- Pay attention to virus protection during the use of mini-host, and try to use a virus firewall.
- Please turn off the mini-host and disconnect the power supply if you don’t use it for a long time.
- Do not switch on and off the mini-host frequently in a short period. It is recommended that the interval between two startup times should be at least 10 seconds, preferably not less than 60 seconds.
- Pay attention to moisture-proof, and keep the use environment clean and sterilized. If there is dust on the host machine, please wipe it with a dry soft cloth.
- Avoid direct exposure of strong light to the mini-host, and do not approach a strong magnetic field.
- Do not get water, food and other fluids onto the mini-host, and do not pull the data cable, power cord, etc.
FCC
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>