RaySharp B221 Wireless NVR System User Guide

RaySharp B221 Wireless NVR System

Specifications

• Model Number : ZLUHOHVV1956
• Power : 4XLFN6WDUW
• Dimensions : 6RODU3DQHO

Product Information

The ZLUHOHVV1956 is a versatile product designed for various applications. It features a durable construction and efficient performance.

Product Usage Instructions:

Initial Setup

1. Unbox the product and check for any damages.
2. Connect the power source to the 4XLFN6WDUW input.
3. Place the product in a well-ventilated area.

Operating the Product

1. Turn on the device using the designated power button.
2. Follow the instructions on the display screen for further setup.
3. Adjust settings as needed for optimal performance.

Maintenance

• Regularly clean the product surfaces with a soft cloth.
• Avoid exposing the product to extreme temperatures or moisture.
• Refer to the user manual for troubleshooting tips.

FAQ

• Q: How do I troubleshoot if the product stops working?
  • A: Check the power source, ensure all connections are secure, and consult the user manual for troubleshooting steps.
• Q: Can I use the product outdoors?
  • A: It is recommended to use the product in a dry and stable indoor environment to prevent damage.
• Q: What is the warranty period for this product?
  • A: The warranty period for the ZLUHOHVV1956 is one year from the date of purchase, covering manufacturing defects.

Wireless NVR System

Quick Start Guide

What’s in the Box

Note: Quantity of devices and accessories vary by different models that you purchase

Introduce the NVR

1. Network Status LED
2. Storage Status LED
3. Power Status LED
4. 4 HDMI Port
5. USB Port
6. MicroSD Card Slot
7. Ethernet Port
8. Reset Hole
9. USB Port
10. Power Port

Introduce the Camera

1. Eject button
2. Magnetic charging port
3. Speaker
4. Microphone
5. Photosensitive Sensor
6. Camera Lens
7. Warning lights
8. Spot Light
9. Infrared LED
10. Indicator Light
11. Solar Panel
12. Solar Panel Bracket
13. PIR Sensor

Power Button

1. Press and hold for 3 seconds to turn on the camera when is off.
2. Press and hold for 8 seconds to turn off the camera when is on .

Expanding Storage(Optional)
The NVR supports SD cards (with a maximum capacity of 512G) or 2.5-inch hard drives for storing video recordings.

Prepare Your Hard Drive

Your hard drive must meet the following requirements:
A new hard drive must be formatted. You may need to transfer all the data from your hard drive to a secure location if necessary.

Install Your Hard Drive

MR must be powered off when you install or remove a hard

1. Push down the bottom lid to remove It.
2. Loosen the screw, then pull out the hard drive bracket.
3. Fix your hard drive to the bracket with the provided screws.
4. Insert and screw the bracket back to NVR, then put the bottom lid back into place.

Charging the Camera
We recommend fully charge the cameras before first use.

Setting Up the System

1. Connect the included power adapter to the NVR, wait a few minutes for the system to start up.
2. Connect the NVR to your router using the included Ethernet cable. And then, connect the USB mouse to the USB port of the NVR. ****
3. Connect the NVR to the monitor with a HDMI cable. (Optional, if you wish to monitor on a screen)
4. To turn on and pair the camera, please click the pairing button on the display and press the reset button three times within 3 seconds. It will automatically connect to the NVR via a wireless signal
5. Download and install the free “Smart Camera View” app form the App Status (iOC devices)Google Play (Android devices ). a Downloads the APP b y scanning belong QR scale code
6.  Run the “SmartCamera View” app sign up d a SmartCamera View Life accent. Then login with your accent ID, tap “+Add Device” and s can the setup QR cade on the Device Ba ton (remove the bottom lid). Or scan the setup QR code in the NVR many and then download the in-app instructions to add the in remote

Mounting the Camera

Option 1 : Mount the Camera with the Solar Panel Attached (Less Drilling) If you want a location without any yes and sunlight is not obstructed, install the solar panel directly on the top of the camera with the solar panel’s mounting bracket.

1. Install the solar panel on to the solar panel’s mounting bracket by turning it.
2. Secure the power cable of the solar panel on to the bracket’s side .
3. Drill hides with a 6.0 mm drill bit with the included positioning card, then insert the ancho s into the hides.
4. Install the camera to its mounting bracket by turning it clockwise until it clicks in top lace
5. Tighten the locking screw on the mount bracket, adjust it to the angle you need, and connect the magnetic extension cord.
6. Connect the magnetic adaptor to the magnetic part of the solar panel.

Option 2: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)
If the camera is blocked, install the solar panel in solar and L5 e the provided USB-C extension cable and Magnetic suction line to get strong solar power. The camera can be mounted new wall allowing the ceiling.

1. Disassemble the Solar Panel Mounting Bracket.

2. Install the mounting bracket of the solar panel in a suitable ambition

3. Install the solar panel onto its mounting bracket by turning it, then adjust the angle.

4. Install the camera
   Drill holes with a 6.0 mm drill bit with the included positioning card then insert the anchors into the holes

5. Install the camera onto its mounting bracket by turning it clockwise until it clicks into place.

6. Tighten the locking screw on the mount bracket, and then adjust to the angle you need

7. Connect the solar panel to the camera using the provided USB-C extension cable.

Camera Holding Bracket

The camera holding bracket can be used for placement and adjustment of angles in some scenarios.

Pairing the Camera
Pair your add-on camera or re-add existing camera to your NVR:

Option 1 : Using the “SmartCamera View Life” app, from the Live view, tap the “..” button, and then tap “Pairing” to start the pairing process. You’ will have a 180-second timer to pair with your Camera.

Poke the camera’s reset button three times within three seconds to start pairing with the NVR. A “Pairing Successful” message should appear on the screen. If you do not see this message, repeat the steps above.

Option 2 : You can also add the camera via the Monitor, tap the “pair” button on NVR Live View menu to start the pairing process. If t

Poke the camera pair button three times within three seconds to start pairing with your NVR. A “Pairing Successful” message should appear on the screen. If you do not see this message, repeat the steps above.

Troubleshooting

No video cut to put on the mounting wall
If there’s no video output on the monitor from NVR, please try the following solutions:

• Monitor resolution should be at least 720P or above.
• Hold down right mouse button for 10 seconds to restore default resolution.
• Double check the HDMI connection, or swap another cable or monitor to test.

**Notification of Compliance

** The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

compliance Statement

This device contains licence-exempt transmitters)/receivers) that comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement
The transmitter/receiver exempt from licensing contained in this device complies with Innovation, Science and Economic Development Canada’s (ISED) regulations applicable to license-exempt radio apparatus. Operation is subject to the following two conditions:

1. This device must not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
This equipment complies with the radiation exposure limits set forth for uncontrolled environments in Canada. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Simplified EU Declaration of Conformity
SmartCamera View declares that this device is in compliance with the essential requirements and other relevant provision of Directive EN300328,EN301489-1,EN31489-17,EN IEC 62311, ENIEC 62368. Correct Disposal of This Product Please recycle this product responsibly to promote the sustainable reuse of material resources and avoid potential harm to the environment.

Correct Disposal of This Product
Please recycle this product responsibly to promote the sustainable reuse of material resources and avoid potential harm to the environment.

Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>