MAXIM LIGHTING 39561 Capsule 18 Inch LED Bath Vanity Instruction Manual
- June 11, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 39561 Capsule 18 Inch LED Bath Vanity
Product Specifications:
- Item/Model Number: 39561
- \Product Name: Capsule 18 LED Bath Vanity CCT Select
- Lamping | Ampoule: 1 x 11W LED Integrated (Included)
- Power Supply: 120V
- Country of Origin: Made in China | Fabrique en Chine | Hecho en China
Product Usage Instructions
Parts Checklist:
Before starting, ensure the package contains the following components:
-
8-32 x 1 Mounting Screw – x2
- ST4 * 1.25 (30mm) Anchor Screw – x4
Installation Steps:
- Identify the mounting location for the vanity light.
- Use the provided mounting screws to secure the fixture in place.
- Connect the wires following the color code (Black/Positive, White/Neutral, Green/Ground).
- Adjust the CCT selection switch inside to choose between different color temperatures (2700K – 5000K).
Frequently Asked Questions
Q: Can I adjust the color temperature of the LED light?
A: Yes, you can adjust the color temperature using the CCT selection switch accessible inside the fixture.
Q: What is the power supply requirement for this product?
A: The product operates on a standard voltage of 120V.
Item/Model Number: 39561
Capsule 18″ LED Bath Vanity CCT Select
Lamping | Ampoule: 1 x 11W LED Integrated (Included)
Please consult a qualified electrician prior to install
Made in China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Day da marthe threads rews and bolts as this
- Do not let children play with this product.
- Risk of suffocation!
- Keep packaging materials away from children.
Lamp Care Instructions
-
Carefully read through the instruction sheet before assembly and using the product.
-
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning- -
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
-
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
-
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following components: