HOMCOM 830-808V50 Full Length Mirror with LED Lights Instruction Manual
- June 11, 2024
- HOMCOM
Table of Contents
HOMCOM 830-808V50 Full Length Mirror with LED Lights
Product Information
Specifications
- Model: IN231000125V01_GL
- Compatible Models: 830-807V70, 830-807V80, 830-808V50, 831-716V90, 831-717V80, 831-717V90, 831-718V90, 831-719V90, 831-720V70, 831-721V70, 831-721V81, 831-721V90
- Languages: English, French, Italian
Product Usage Instructions
Initial Setup
Before using the product, ensure all components are properly connected according to the user manual.
Power On
Press the power button to turn on the device. Wait for the device to boot up completely.
Navigation
Use the navigation buttons to browse through different menus and options on the device.
Settings Adjustment
Access the settings menu to adjust display settings, sound preferences, and other configurations as needed.
Maintenance
Regularly clean the product with a soft dry cloth to prevent dust buildup.
FAQ
Q: How do I change the language settings?
A: To change the language, navigate to the settings menu and look for the language option. Select your preferred language from the available options.
Q: What should I do if the product fails to power on?
A: Check the power source and connections. If the issue persists, contact customer support for assistance.
Q: Can I use this product outdoors?
A: This product is designed for indoor use. Using it outdoors may expose it to environmental conditions that could damage the device.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
WARNING AND SAFETY INSTRUCTIONS
Before assembly, carefully read this instruction manual. Refer back to this manual when installing the product to ensure it is frtted safely and correctly. Keep these instructions for future use.
WARNING Risk of fire and electric 9hock
-
All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
-
Switch off the electrical supply at the main circuit board before installation and maintenance.
-
For Indoor use only. This product should be positioned well away from curtains and fabrics.
Never cover the mirror. -
Regularly check the cord, the transformer and all other parts for damage. If damages are found, do not use this product.
INSTALLATION SAFETY
- Before installation, ensure the product is not damaged or has missing parts. Handle the product with care.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable aye protection when drilling. Take care if drilling on tiled surfaces, just in case the drill slips.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the product. Do not install this product in hazardous locations.
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror x 1
- Screws for wall x 2
- Type A Plastic Anchor x 2
- Installation Manual x 1
TOOLS YOU MAY NEED
INSTALLATION
- Measure the distance of the hanging hole.
- Mark the hole position on the wall.
- Drill the holes and place the suitable plastic anchors.
- Arrange the screws on the wall, leaving about 3/8 inch outside the wall, and make sure the screws are stable.
- Connect the mirror with the main
- Hang the mirror on the screw supply.
OPERATION INSTRUCTION
- Button lights up when connected to main supply.
- Touch the button to turn on/off the mirror
- Hold the button to adjust the brightness.
- Confirm the setting by removing your finger when it reaches the colour you need.
- The touch switch indicator light is in the ON state by default; to turn it off, please press and hold the
- touch switch for 3 seconds.
AFTERCARE INSTRUCTIONS
Before cleaning, ensure the mirror is turned off. Clean using a soft and dry cloth. Never use cleaning agents or abrasive materials. Do not allow moisture to come into contact with the lamp.
UK
If you have any questions, please contact our customer care center.
Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS: MH STAR UK LTD
Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH MADE IN CHINA
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>