AURORA ST324B 6000K Day Light LED Strip Instruction Manual
- June 11, 2024
- Aurora
Table of Contents
- AURORA ST324B 6000K Day Light LED Strip Instruction Manual
- AURORA ST324B 6000K Day Light LED Strip
- IMPORTANT INSTALLATION INFORMATION
- 24V DG LED FLEXIBLE STRIP LIGHT AND ACCESSORIES
- Environmental Protection (W.E.E.E) – Aurora’s WEEE Reg.No. WEE/BGO130YX
- GUARANTEE ‘
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AURORA ST324B 6000K Day Light LED Strip Instruction Manual
AURORA ST324B 6000K Day Light LED Strip
IMPORTANT INSTALLATION INFORMATION
Installation should be carried out by a qualified elecrician in accordance with the latest edition of the National wiring regulations.
- The LED Strip operates at 24V DC.
- A 24 DG LED Driver s required (not included).
- When connecting to an LED 24 V Driver, ensure that the polarity i correct. The strip may be damaged if connected incorrectly.
- Please note that the strip is IP67 but any user made connections or joints cannot be guaranteed to be IP rated.
- Before commencing installation or maintenance, ensure electricityis switched off at the mains.
- Ensure that ALL electrical connections are tight with no loose strands, including factory connections.
- Asoldering iron and heat gun are required for installation (not supplied).
24V DG LED FLEXIBLE STRIP LIGHT AND ACCESSORIES
- ST3248 High Density Flexible LED strip light
- STIPCKB Connector kit accessory
- Toinstall the LED Driver please refer to their own instructions.
- A maximum of 10m of can be connected in a continuous length. For runs of over 10m connect individual lengths in parallel.
- ‘The EN-STIPCKB is used to connect the strip to a 24V DC Driver At the strip connection carefully cut away the plastic sheath to reveal the +ve and – connection points.
- ‘The copper track is lacquered which will need to be removed 50 that the solder will take to the copper track. Use a knife to carefully scrape away the lacquer from the surface of the copper track. “Tin’ the copper track and the EN-STIPCKB connection wires. Carefully solder the wires onto the LED strip.
- Apply the glue to the connection and end of the strip. As this is a user made connection an IP rating cannot be guaranteed Ensure when applying strip to surface, it is smooth and clean.
Environmental Protection (W.E.E.E) – Aurora’s WEEE Reg.No. WEE/BGO130YX
(UK Only)
Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any of our products showing this marking (ief must not be disposed of with other household or commercial waste. Aurora does notlevy any WEEE disposal charges t its customers for affected WEEE related products. o prevent possible harm to the environment or human health from uncontrolled waste disposal,please separate any such product from other waste types and recycle it responsibly at your local faciites. Chick with your Local Authoriy, Recyciing Centre o retaler for recycling advice. f when you purchased any Aurora product, your supplier included a WEEE disposal fee, you should then contact your supplier for advice on his take back of the product for the correct disposal.
GUARANTEE ‘
This productis guaranteed for aperiod of 3 years from the date of purchase. The guarantee is invalid i the case of improper use, installation, tampering, and removal of the Q.C. date abel, nstallation in an improper working environment or installaion not according to the curtent edition of the National Wiring Regulations. Should this product ailduring the guarantee period it will be replaced free of charge, Subject to correct nstallaion and retur of the faulty unit. Aurora does ot accept responsibilty for any installaion costs associated with the replacement of this product. This warranty is in adtion to the statutory rights in your country of purchase. Aurora reserves the rightto alter specifications without prior notice.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>