Werkzeyt ZYD29889 Camping Lamp User Manual
- May 15, 2024
- Werkzeyt
Table of Contents
Werkzeyt ZYD29889 Camping Lamp User Manual
Camping lamp
1. Product features:
Item number: ZYD29889
Light output: max. 30 lumen
max. luminous duration: 3-5 hours
Weight with batteries: 62 g
Suitable for indoor use only
Battery operation (AAA Micro · R03 · 1.5 V (included))
2. Intended use:
- This product is only suitable for lighting for private use.
- The product is not intended for commercial or any other use.
- The distributor accepts no liability for incorrect use and/or unauthorised modifications to the product.
3. Safety instructions:
- CAUTION: LED radiation! Do not look directly into the LED beam or shine the lamp into the eyes of other living creatures.
- Do not use old and new batteries together.
- Leaking or damaged batteries can cause burns if they come into contact with the skin; therefore be sure to wear suitable protective gloves in this case.
- Never expose the unit to high temperatures and humidity, otherwise the unit may be damaged.
- In case of damage, repairs or other problems with the lamp, contact the service centre or a qualified electrician.
- Do not mount the lamp on a damp or conductive surface.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge.
Liability is excluded in case of improper use and non-observance of the operating instructions.
4. Cleaning:
Remove the batteries from the lamp before cleaning. Use a dry cloth to clean
the lamp and never use petrol, solvents or cleaners that could damage
plastics.
Use a slightly damp cloth for heavier soiling.
5. Operation:
Insert batteries:
-
Unscrew the upper part of the lamp by turning it.
-
Insert the AAA Micro · R03 · 1.5 V batteries into the battery holder.
Make sure that the polarity of the batteries is correct. -
Fasten the lamp again by screwing.
-
Please remove the batteries if you will not be using the unit for a long time.
Switching on / off:
Pressing the ON/OFF button of the lamp will switch the
lamp on and off.
Selecting the light modes:
After switching on the lamp, the following modes can be changed by pressing
the button:
- 100 %
- 50 %
- Flashing mode
6. Declaration of conformity
You can view the declaration of conformity at
www.conmetallmeister.de