IKEA INSPELNING Affordable Smart Home Sensors Instruction Manual

: June 10, 2024
: Ikea

Table of Contents

IKEA INSPELNING Affordable Smart Home Sensors
Product Usage Instructions
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IKEA INSPELNING Affordable Smart Home Sensors

IKEA-INSPELNING-Affordable-Smart-Home-Sensors-Instruction-
PRODUCT

Specifications

Model: INSPELNING plug smart
Type: E2220
Input: 120 Vac, 50/60Hz
Resistive: max. 1800 W 15.0 A
Motor: max. 300 W
Range: 10 m in open air
Operating frequency: 2405-2480 MHz
Output power: 10 dBm (EIRP)

Product Usage Instructions

Getting Started

Download the IKEA Home Smart app on your Apple or Android device.
Follow the on-screen instructions to add the smart plug to your IKEA Home Smart system using the DIRIGERA hub.

Pairing a Steering Device

To pair a steering device to your smart plug
Ensure the smart plug is plugged in and turned on.
Hold the steering device within 5 cm of the smart plug.
Press and hold the pairing button for at least 10 seconds until the devices are paired.

Note

Each steering device can control up to 10 smart plugs.

Turning On/Off Your Device

To turn your device on/off:

Press the On/Off button on the smart plug once to toggle between on and off.
When using a remote, press the On button ( | ) to turn on and the Off button (0) to turn off.

Factory Reset

To factory reset your smart plug, push the reset button on top for at least 5 seconds until the LED starts pulsating.

INSPELNING

Devices connected to INSPELNING smart plug can be controlled by a remote control. When INSPELNING smart plug is used together with DIRIGERA hub, connected devices can be controlled via the IKEA Home Smart app. The IKEA Home Smart app can also be used to monitor the power consumption of connected devices.

IKEA Home smart app

For Apple devices, download the app using the App Store. For Android devices, download the app using Google Play store.

Getting started with DIRIGER

A hub Download the IKEA Home smart app and follow the instructions on screen to add the smart plug to your IKEA Home smart system.

Pairing a steering device to your smart plug

When the smart plug is sold together with a remote (in the same package) they are already paired. To add more smart plugs, just repeat the steps below:

Make sure that your smart plug is plugged in and the main power is turned on.
Hold the steering device close to the smart plug you want to add (no more than 5 cm away).
Press and hold the pairing button (Icon) for at least 10 seconds. A red LED will steadily shine on the steering device. On your smart plug a white light will begin to dim and flash one time to indicate that it has been successfully paired.Up to 10 smart plugs can be paired with 1 steering device. Make sure
to pair them one at a time. If the smart plugs are close to each other, disconnect those that have already been paired from the wall outlet.

Turn on/off your device

Press the On/Off button on the smart plug once to turn it on. Press it once again to turn it off.
When using a remote: Press the On button ( | ) to turn the smart plug on. Press the Off button (0) to turn the smart plug off.

Factory reset your smart plug

Push the reset button on top of the smart plug with a pointy object for at least 5 seconds until the LED starts pulsating.

IMPORTANT
The Smart plug is for indoor use only and can be used in temperatures from 0ºC to 35ºC (32°F – 95°F)

Do not leave the Smart plug in direct sunlight or near any heat source, as it may overheat.
Do not subject the Smart plug to wet, moist or excessively dusty environments as this may cause damage.
The range between the steering device and the receiver are measured in open air. Different building materials and placement of the units can affect the wireless connectivity range.

WARNING

Do not connect after each other in sequence.
Do not cover when in use.
To disconnect the power, pull the plug.
Use only indoors in dry areas.
Do not overload the product.
Discard the product if damaged.
For adult use only. This is not a toy and is not intended for use by children.

Care instructions

To clean the Smart Plug wipe with a soft dry cloth.

Note
Never use abrasive cleaners or chemical solvents since this can damage the product.

Product servicing

Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

Technical data

Model: INSPELNING plug smart Type: E2220
Input: 120 Vac, 50/60Hz
Resistive: max. 1800 W 15.0 A Motor: max. 300 W
Range: 10 m in open air.
For indoor use only
Operating frequency: 2405-2480 MHz Output power: 10 dBm (EIRP)

Save these instructions for future use. Manufacturer: IKEA of Sweden AB Address: Box 702, SE-343 81 Älmhult, SWEDEN

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

WARNING

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the product at least 20cm away from the human body when using

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. This Class B digital apparatus complies with Canadian ICES-003. The crossed-out wheeled bin symbol indicates that the item shouldbe disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.