Lenovo V50t-13IMH Tower Intel Core Computer User Guide

: June 10, 2024
: Lenovo

Table of Contents

Lenovo V50t-13IMH Tower Intel Core Computer
Product Usage Instructions
FAQs
Meet your computer
Get started with your computer
Explore your computer
Secure your computer and information
UEFI BIOS
Diagnostics
CRU replacement
Help and support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lenovo V50t-13IMH Tower Intel Core Computer

Lenovo-V50t-13IMH-Tower-Intel-Core-Computer-image

Specifications

USB Specifications: USB-A 3.2 Gen 2 and USB-A 3.2 Gen 1 connectors
Optical drive: Available on selected models
Storage drive: Activity indicator included

Product Usage Instructions

Chapter 1: Meet Your Computer

Front:

1. Optical drive eject button*
3. SD-card slot*
5. Storage drive activity indicator
7. Headset connector
9. USB-A 3.2 Gen 2 connectors

Rear:

Features and specifications

Chapter 2: Get Started with Your Computer

Connect an external display:

Connect to the wired Ethernet.
Connect to Wi-Fi networks (for selected models).
Manage cables with a smart cable clip.

Chapter 3: Explore Your Computer

The Vantage app:

Set the power plan.
Transfer data.
Use the optical drive (for selected models).
Use a media card (for selected models).
Purchase accessories.

Chapter 4: Secure Your Computer and Information

Lock the computer.

UEFI BIOS passwords.
Use software security solutions.
- – Windows firewalls.
- – Antivirus programs.
Use BIOS security solutions.
- – Erase all storage drive data.
- – Cover presence switch.
- – Intel BIOS guard.
- – Smart USB Protection.

Chapter 5: UEFI BIOS

What is UEFI BIOS:

Enter the BIOS menu.
Navigate in the BIOS interface.
Change the display language of UEFI BIOS.
Set the system date and time.
Change the boot priority order.
Enable or disable the configuration change detection
feature.

FAQs

Q: What is the USB transfer rate for the Lenovo computer?
A: The Lenovo computer features USB-A 3.2 Gen 2 and USB-A 3.2 Gen 1 connectors, providing high-speed data transfer rates.

User Guide

Read this first Before using this documentation and the product it supports, ensure that you read and understand the following: · Safety and Warranty Guide · Generic Safety and Compliance Notices · Setup Guide
Third Edition (November 2023) © Copyright Lenovo 2022. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.

i

ii User Guide

Discover your Lenovo computer
Thank you for choosing a Lenovo® computer! We are dedicated to delivering the best solution to you.
Before starting your tour, please read the following information: · Illustrations in this documentation might look different from your product. · Depending on the model, some optional accessories, features, software programs, and user interface
instructions might not be applicable to your computer. · Documentation content is subject to change without notice. To get the latest documentation, go to https://
pcsupport.lenovo.com.

iii

iv User Guide

Chapter 1.

Meet your computer

Front

Item 1 3 5 7 9

Description Optical drive eject button SD-card slot Storage drive activity indicator Headset connector USB-A 3.2 Gen 2 connectors

Item 2 4 6 8 10

Description Optical drive activity indicator Power button Microphone connector USB-A 3.2 Gen 1 connectors Internal speaker

for selected models
Statement on USB transfer rate
Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.

USB device 3.2 Gen 1 3.2 Gen 2 3.2 Gen 2 × 2

Data rate (Gbit/s) 5 10 20

1

USB device Thunderbolt 3 Thunderbolt 4

Data rate (Gbit/s) 40 40

Power indicator Show the system status of your computer. · Blinking for three times: The computer is initially connected to power. · On: The computer is starting up or working. · Off: The computer is off or in hibernation mode. · Blinking rapidly: The computer is entering sleep or hibernation mode. · Blinking slowly: The computer is in sleep mode.
Headset connector The headset connector is compatible with: · Headphones or earphones with a 3.5mm (0.14 inch), TRS (3-pole) plug · Headsets with a 3.5mm (0.14 inch), CTIA-compliant TRRS (4-pole) plug
Note: This headset connector does not support standalone external microphones with a TRS (3-pole) plug or headsets with an OMTP-compliant TRRS (4-pole) plug.
Related topics · “USB specifications” on page 5. · “Use the optical drive (for selected models)” on page 9. · “Use a media card (for selected models)” on page 10.

2 User Guide

Rear

Item 1. 3.
5.
7. 9. 11. 13. 15.

Description Microphone connector VGA-out connector
USB-A 2.0 connector
Power cord connector Audio line-in connector Serial connector Ethernet connector PCI-Express card area

Item 2. 4.
6.
8. 10. 12. 14. 16.

Description
HDMITMout connector PS/2 keyboard connector USB-A 2.0 connector (with smart power-on feature) Audio line-out connector Smart cable clip slots PS/2 mouse connector Serial connector* Security-lock slot

for selected models
Serial connector Connect an external modem, a serial printer, or other devices that use a serial connector.
Related topics · “USB specifications” on page 5. · “Connect an external display” on page 7.

Chapter 1. Meet your computer 3

· “Lock the computer” on page 11. · “Enable or disable the smart power-on feature (for selected models)” on page 19.

Features and specifications
For detailed specifications of your computer, go to https://psref.lenovo.com.

Specification
Dimensions Weight (without packaging) Hardware configuration Power supply

Description
· Width: 145 mm (5.71 inches) · Height: 367 mm (14.45 inches) · Depth: 275.8 mm (10.86 inches) Maximum configuration as shipped: 5.7 kg (12.6 lb) Type Device Manager in the Windows search box and then press Enter. Type the administrator password or provide confirmation, if prompted.
· 180-watt automatic voltage-sensing power supply

Electrical input Memory Storage device Video features Expansion Network features

· Input voltage: From 100 V ac to 240 V ac · Input frequency: 50/60 Hz Double data rate 4 (DDR4) unbuffered dual in-line memory modules (UDIMMs)
Maximum memory capacity: 16GB
· 3.5-inch hard disk drive · M.2 solid-state drive
To view the storage drive capacity of your computer, type Disk Management in the Windows search box and then press Enter.
Note: The storage drive capacity indicated by the system is less than the nominal capacity. The integrated graphics card supports the following: · HDMI out connector · VGA-out connector
· Card reader · Memory slots · M.2 solid-state drive slot · Optical drive · Storage drive bay · PCI Express slots
· Ethernet LAN · Wireless LAN*

for selected models

4 User Guide

USB specifications
Note: Depending on the model, some USB connectors might not be available on your computer.

Connector name

Description

·

USB-A 2.0 connector

·

USB-A 3.2 Gen 1 connector

·

USB-A 3.2 Gen 2 connector

·

USB-C (3.2 Gen 1) connector

·

USB-C (3.2 Gen 2) connector

·

USB-C (3.2 Gen 2×2)connector

·

USB-C (Thunderbolt 3) connector

·

USB-C (Thunderbolt 4) connector

Connect USB-A compatible devices, such as a USB-A keyboard, USB-A mouse, USB-A storage device, or USBA printer.
· Charge USB-C compatible devices with the output voltage and current of 5 V and 3 A.
· Connect to an external display: USB-C to VGA: 1920 x 1200 pixels, 60 Hz USB-C to DP: 3840 x 2160 pixels, 60 Hz
· Connect to USB-C accessories to help expand your computer functionality. To purchase USB-C accessories, go to https://www.lenovo.com/accessories.

Chapter 1. Meet your computer 5

6 User Guide

Chapter 2.

Get started with your computer

Connect an external display
Connect a projector or a monitor to your computer to give presentations or expand your workspace.
Connect a wireless display Ensure that both your computer and the wireless display support Miracast®.
Press Windows logo key + K and then select a wireless display to connect.
Change display settings 1. Right-click a blank area on the desktop and select display settings. 2. Select the display that you want to configure and change display settings of your preference.
Access networks
This section helps you access networks through connecting to a wired or wireless network.
Connect to the wired Ethernet
Connect your computer to a local network through the Ethernet connector on your computer with an Ethernet cable.
Connect to Wi-Fi networks (for selected models)
Click the network icon in the Windows® notification area, and then select a network for connection. Provide required information, if needed.

Manage cables with a smart cable clip
Note: You can purchase a smart cable clip from Lenovo.
To manage cables of devices (such as the keyboard and the mouse) with a smart cable clip: 1. Pull the cables through the dents in the clip.

7

2. Install the clip as shown. 8 User Guide

Chapter 3.

Explore your computer

The Vantage app
The preinstalled Vantage app is a customized one-stop solution to help you maintain your computer with automated updates and fixes, configure hardware settings, and get personalized support.
To access the Vantage app, type Vantage in the Windows search box.
Key features The Vantage app enables you to: · Know the device status easily and customize device settings. · Download and install UEFI BIOS, firmware and driver updates to keep your computer up-to-date. · Monitor your computer health, and secure your computer against outside threats. · Scan your computer hardware and diagnose hardware problems. · Look up warranty status (online). · Access User Guide and helpful articles.
Notes: · The available features vary depending on the computer model. · The Vantage app makes periodic updates of the features to keep improving your experience with your
computer. The description of features might be different from that on your actual user interface.
Set the power plan
For ENERGY STAR® compliant computers, the following power plan takes effect when your computers have been idle for a specified duration: · Turn off the display: After 10 minutes · Put the computer to sleep: After 25 minutes
To awaken the computer from Sleep mode, press any key on your keyboard.
To reset the power plan: 1. Type Power Options in the Windows search box and then press Enter. 2. Choose or customize a power plan of your preference.
Transfer data
Quickly share your files using the built-in Bluetooth technology among devices with the same features. You also can install a disc or media card to transfer data.
Use the optical drive (for selected models)
If your computer has an optical drive, read the following information.

9

Know the type of your optical drive 1. Type Device Manager in the Windows search box and then press Enter. Type the administrator password or provide confirmation, if prompted. 2. Select an optical drive, and then follow the on- screen instructions.
Install or remove a disc 1. With the computer on, press the eject button on the optical drive. The tray slides out of the drive. 2. Insert a disc into the tray or remove a disc from the tray, and then push the tray back into the drive.
Note: If the tray does not slide out of the drive when you press the eject button, turn off the computer. Then, insert a straightened paper clip into the emergency-eject hole adjacent to the eject button. Use the emergency eject only in an emergency.
Record a disc 1. Insert a recordable disc into the optical drive that supports recording. 2. Do one of the following: · Type AutoPlay in the Windows search box and then press Enter. Turn on Use AutoPlay for all media and devices. · Open Windows Media Player. · Double-click the ISO file. 3. Follow the on- screen instructions.
Use a media card (for selected models)
If your computer has a SD-card slot, read the following information.
Install a media card 1. Locate the SD-card slot. 2. Ensure that the metal contacts on the card are facing the ones in the SD-card slot. Insert the card firmly into the SD-card slot until it is secured in place.
Remove a media card Attention: Before removing the card:
1. Click the triangular icon in the Windows notification area to show hidden icons. Right-click the icon prompting you to safely remove hardware and eject media.
2. Select the corresponding item to eject the card from the Windows operating system. 3. Press the card and remove it from your computer. Store the card safely for future use.
Purchase accessories
Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your computer. Options include memory modules, storage devices, network cards, power adapters, keyboards, mice, and more.
To shop at Lenovo, go to https://www.lenovo.com/accessories.
10 User Guide

Chapter 4.

Secure your computer and information

Lock the computer
Note: Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature. You can purchase computer locks from Lenovo. Padlock Locking the computer cover through a padlock prevents unauthorized access to the inside of your computer.
Kensington-style cable lock Lock your computer to a desk, table, or other fixtures through a Kensington-style cable lock.

E-lock Your computer might have a security lock solution installed to protect the computer from unauthorized tampering of the internal components. Using the E-Lock, you can mechanically lock or unlock the computer cover.
To enable or disable the E-Lock: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

11

2. Select Security Electronic Lock to enable or disable the E-lock. 3. Press F10 or Fn+F10 to save the changes and exit. Your computer will restart automatically and then
changes take effect.
UEFI BIOS passwords
You can set passwords in UEFI (Unified Extensible Firmware Interface) BIOS (Basic Input/Output System) to strengthen the security of your computer. Password types You can set a power-on password, supervisor password, system management password, or hard disk password in UEFI BIOS to prevent unauthorized access to your computer. However, you are not prompted to enter any UEFI BIOS password when your computer resumes from sleep mode. · Power-on password
When a power-on password is set, you are prompted to enter a valid password each time the computer is turned on. · Supervisor password Setting a supervisor password deters unauthorized users from changing configuration settings. If you are responsible for maintaining the configuration settings of several computers, you might want to set a supervisor password. When a supervisor password is set, you are prompted to enter a valid password each time you try to enter the BIOS menu. If both the power-on password and supervisor password are set, you can enter either password. However, you must use your supervisor password to change any configuration settings. · Hard disk password Setting a hard disk password prevents unauthorized access to the data on the storage drive. When a hard disk password is set, you are prompted to enter a valid password each time you try to access the storage drive. Note: After you set a hard disk password, your data on the storage drive is protected even if the storage drive is removed from one computer and installed in another. · System management password (for selected models) You can enable the system management password to have the same authority as the supervisor password to control security related features. To customize the authority of the system management password through the UEFI BIOS menu:
1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.
12 User Guide

2. Select Security System Management Password Access Control. 3. Follow the on-screen instructions. If you have set both the supervisor password and the system management password, the supervisor password overrides the system management password.
Set, change, and remove a password Before you start, print these instructions.
1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Security. 3. Depending on the password type, select Set Supervisor Password, Set Power-On Password, Set
System Management Password, or Hard Disk Password and press Enter. 4. Follow the on-screen instructions to set, change, or remove a password. 5. Press F10 or Fn+F10 to save the changes and exit.
You should record your passwords and store them in a safe place. If you forget the passwords, contact a Lenovo-authorized service provider.
Note: If the hard disk password is forgotten, Lenovo cannot remove the password or recover data from the storage drive.
Use software security solutions
This section provides software solutions to secure your computer and information.
Windows firewalls
A firewall can be hardware, software, or a combination of both depending on the level of security required. Firewalls work on a set of rules to determine which inbound and outbound connections are authorized. If the computer is preinstalled with a firewall program, it helps protect against computer Internet security threats, unauthorized access, intrusions, and Internet attacks. It also protects your privacy. For more information about how to use the firewall program, refer to the help system of your firewall program.
To use Windows firewalls: 1. Type Control Panel in the Windows search box and then press Enter. View by large icons or small icons. 2. Click Windows Defender Firewall, and then follow the on-screen instructions.
Antivirus programs
The computer is preinstalled with an antivirus program to help you guard against, detect, and eliminate viruses.
Lenovo provides a full version of antivirus software on the computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates.
Note: Virus definition files must be kept up-to-date to guard against new viruses.
For more information about how to use your antivirus software, refer to the help system of your antivirus software.
Chapter 4. Secure your computer and information 13

Use BIOS security solutions
This section provides BIOS solutions to secure your computer and information.
Erase all storage drive data
It is recommended that you erase all storage drive data before recycling a storage drive or the computer.
To erase all storage drive data: 1. Set a hard disk password for the storage drive you will recycle. See “UEFI BIOS passwords” on page 12. 2. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 3. Select Security Hard Disk Password Security Erase HDD Data and press Enter. 4. Select the storage drive you will recycle and press Enter. 5. A message is displayed, prompting you to confirm the operation. Select Yes and press Enter. The erasing process begins. Note: During the erasing process, the power button and the keyboard are disabled. 6. After the erasing process is completed, a message is displayed, prompting you to reset the system. Select Continue. Note: Depending on the storage drive capacity, the erasing process will take half an hour to three hours. 7. After the resetting process is completed, one of the following will happen: · If the data on the system storage drive is erased, you will be prompted that no operating system is available. · If the data on the non-system storage drive is erased, the computer restarts automatically.
Cover presence switch
The cover presence switch prevents the computer from logging in to the operating system when the computer cover is not properly installed or closed.
To enable the cover presence switch connector on the system board: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Security Cover Tamper Detected and press Enter. 3. Select Enabled and press Enter. 4. Press F10 or Fn+F10 to save the changes and exit.
If the cover presence switch is enabled and the computer cover is not correctly installed or closed, an error message will be displayed when you turn on the computer. To bypass the error message and log in to the operating system:
1. Properly install or close the computer cover. 2. Enter the BIOS menu, save and then exit.
Intel BIOS guard
The Intel® BIOS Guard module cryptographically verifies all BIOS updates. This hardware-based security helps prevent software and malware attacks on the computers BIOS.
14 User Guide

Smart USB Protection
The Smart USB Protection function is a security function that helps prevent data from being copied from the computer to USB storage devices connected to the computer. You can set the Smart USB Protection function to one of the following modes: · Disabled (default setting): You can use the USB storage devices without limitation. · Read Only: You cannot copy data from the computer to the USB storage devices. However, you can
access or modify data on the USB storage devices. · No Access: You cannot access the USB storage devices from the computer. To configure the Smart USB Protection function:
1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Security Smart USB Protection and press Enter. 3. Select the desired setting and press Enter. 4. Press F10 or Fn+F10 to save the changes and exit.
Chapter 4. Secure your computer and information 15

16 User Guide

Chapter 5.

UEFI BIOS

This chapter provides information about configuring and updating UEFI BIOS, and clearing CMOS.

What is UEFI BIOS
Note: The operating system settings might override any similar settings in UEFI BIOS.
UEFI BIOS is the first program that the computer runs when the computer is turned on. UEFI BIOS initializes the hardware components and loads the operating system and other programs. Your computer comes with a setup program with which you can change UEFI BIOS settings.

Enter the BIOS menu
Restart the computer. When the logo screen is displayed, press F1 or Fn+F1 to enter the BIOS menu.
Note: If you have set BIOS passwords, enter the correct passwords when prompted. You also can select No or press Esc to skip the password prompt and enter the BIOS menu. However, you cannot change the system configurations that are protected by passwords.

Navigate in the BIOS interface
Attention: The default configurations are already optimized for you in boldface. Improper change of the configurations might cause unexpected results.
Depending on your keyboard, you can navigate in the BIOS interface by pressing the following keys, or combinations of Fn and the following keys:

Key F1 or Fn+F1 Esc or Fn+Esc or Fn+ or Fn+ +/ or Fn++/ Enter F9 or Fn+F9 F10 or Fn+F10

Function General Help Exit the submenu Locate an item Move keyboard focus Change value Enter the submenu Setup Defaults Save and exit

Change the display language of UEFI BIOS
UEFI BIOS supports three or four display languages: English, French, simplified Chinese, and Russian (for selected models).
To change the display language of UEFI BIOS: 1. Select Main Language and press Enter. 2. Set the display language as desired.

17

Set the system date and time
1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Main System Time & Date and press Enter. 3. Set the system date and time as desired. 4. Press F10 or Fn+F10 to save the changes and exit.
Change the boot priority order
If the computer does not boot from a device as expected, you can change the boot priority order permanently or select a temporary boot device.
Change the boot priority order permanently 1. Depending on the type of the storage device, do one of the following: · If the storage device is internal, go to step 2. · If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insert the disc into the optical drive. · If the storage device is an external device other than a disc, connect the storage device to the computer. 2. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 3. Select Startup Boot Priority Order, and then follow the on-screen instructions to change the boot priority order. 4. You can also select the first priority device group by selecting Startup First Boot Device, and then follow the on-screen instructions to select the first boot device within this group. Your computer will boot from the first boot device before trying the boot priority order you set in the previous step. 5. Press F10 or Fn+F10 to save the changes and exit.
Select a temporary boot device Note: Not all discs and storage drives are bootable.
1. Depending on the type of the storage device, do one of the following: · If the storage device is internal, go to step 2. · If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insert the disc into the optical drive. · If the storage device is an external device other than a disc, connect the storage device to the computer.
2. Restart the computer. When the logo screen is displayed, press F12 or Fn+F12. 3. Select the storage device as desired and press Enter.
If you want to change the boot priority order permanently, select Enter Setup on Startup Device Menu and press Enter to enter the BIOS menu.
Enable or disable the configuration change detection feature
If you enable configuration change detection, when the POST detects configuration changes of some hardware devices (such as storage drives or memory modules), an error message will be displayed when you turn on the computer.
18 User Guide

To enable or disable the configuration change detection feature: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Security Configuration Change Detection and press Enter. 3. Enable or disable the feature as desired. 4. Press F10 or Fn+F10 to save the changes and exit.
To bypass the error message and log in to the operating system, press F2 or Fn+F2. To clear the error message, enter the BIOS menu, save and then exit.
Enable or disable the automatic power-on feature
The Automatic Power On item in UEFI BIOS provides various options for you to make your computer start up automatically.
To enable or disable the automatic power-on feature: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Power Automatic Power On and press Enter. 3. Select the feature as desired and press Enter. 4. Enable or disable the feature as desired. 5. Press F10 or Fn+F10 to save the changes and exit.
Enable or disable the smart power-on feature (for selected models)
Ensure that the keyboard is connected to a USB connector supporting the smart power-on feature. With the smart power-on feature enabled, you can start up or wake up the computer from the hibernation mode by pressing Alt+P.
To enable or disable the smart power-on feature: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Power Smart Power On and press Enter. 3. Enable or disable the feature as desired. 4. Press F10 or Fn+F10 to save the changes and exit.
Enable or disable the ErP LPS compliance mode
Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go to: https://www.lenovo.com/us/en/compliance/eco- declaration
You can enable the ErP LPS compliance mode to reduce the consumption of electricity when the computer is off or in sleep mode.
To enable or disable the ErP LPS compliance mode: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Power Enhanced Power Saving Mode and press Enter. 3. Depending on whether you select Enabled or Disabled, do one of the following: · If you select Enabled, press Enter. Then, select Power Automatic Power On and press Enter. Check whether the Wake on LAN feature is disabled automatically. If no, disable it.
Chapter 5. UEFI BIOS 19

· If you select Disabled, press Enter. Then, go to the next step. 4. Press F10 or Fn+F10 to save the changes and exit.
When the ErP LPS compliance mode is enabled, you can wake up the computer by doing one of the following: · Press the power button. · Enable the Wake Up on Alarm feature to make the computer wake up at a set time.
To meet the off mode requirement of ErP compliance, you need to disable the Fast Startup function. 1. Go to Control Panel and view by large icons or small icons. 2. Click Power Options Choose what the power buttons do Change settings that are currently unavailable. 3. Clear the Turn on fast startup (recommended) option from the Shutdown settings list.
Change the ITS performance mode
You can adjust the acoustic and thermal performance of your computer by changing the ITS performance mode. Three options are available: · Balance mode: The computer works at the balance mode with balanced noise and better performance. · Performance mode (default setting): The computer works at the best performance with normal acoustic
level.
Note: The term “best” only refers to the best effect among different settings of the product itself. · Full Speed: All fans in the computer will run at full speed.
To change the ITS performance mode: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Power Intelligent Cooling and press Enter. 3. Select Performance Mode and press Enter. 4. Set the performance mode as desired. 5. Press F10 or Fn+F10 to save the changes and exit.
Change BIOS settings before installing a new operating system
BIOS settings vary by operating system. Change the BIOS settings before installing a new operating system.
Microsoft constantly makes updates to the Windows operating system. Before installing a particular Windows version, check the compatibility list for the Windows version. For details, go to: https://support.lenovo.com/us/en/solutions/windows-support
To change the BIOS settings: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. From the main interface, select Security Secure Boot and press Enter. 3. Depending on the operating system to be installed, do one of the following: · To install a Windows operating system that supports secure boot, select Enabled for Secure Boot. · To install an operating system that does not support secure boot, such as some Linux operating systems, select Disabled for Secure Boot.
20 User Guide

4. Press F10 or Fn+F10 to save the changes and exit.
Update UEFI BIOS
When you install a new program, device driver, or hardware component, you might need to update UEFI BIOS. You can update the BIOS from your operating system or a flash update disc (supported only on selected models).
Download and install the latest UEFI BIOS update package by one of the following methods: · From the Vantage app:
Open the Vantage app to check the available update packages. If the latest UEFI BIOS update package is available, follow the on-screen instructions to download and install the package. · From the Lenovo Support Web site:
1. Go to https://pcsupport.lenovo.com. 2. Download the flash BIOS update driver for the operating system version or the ISO image version
(used to create a flash update disc). Then, download the installation instructions for the flash BIOS update driver you have downloaded. 3. Print the installation instructions and follow the instructions to update the BIOS.
Recover from a BIOS update failure
1. Remove all media from the drives and turn off all connected devices. 2. Insert the BIOS update disc into the optical drive, and then turn off the computer. 3. Disconnect all power cords from electrical outlets. Then, remove any parts that impede access to the
Clear CMOS jumper. 4. Move the jumper from the standard position to the maintenance position. 5. Reconnect the power cords for the computer and the monitor to electrical outlets. 6. Turn on the computer and the monitor. When the computer beeps, the recovery process begins. 7. After the recovery process is completed, the computer will be turned off automatically.
Note: Depending on the computer model, the recovery process will take two to three minutes. 8. Disconnect all power cords from electrical outlets. 9. Move the jumper back to the standard position. 10. Reinstall all the parts that have been removed. Then, reconnect the power cords for the computer and
the monitor to electrical outlets. 11. Turn on the computer and the monitor. When the logo screen is displayed, press F1 or Fn+F1. 12. To prevent data loss, ensure that BIOS settings are restored to an earlier point.
Clear CMOS
1. Remove all media from the drives and turn off all connected devices and the computer. 2. Disconnect all power cords from electrical outlets. Then, remove any parts that impede access to the
Clear CMOS jumper. 3. Move the jumper from the standard position to the maintenance position. 4. Reconnect the power cords for the computer and the monitor to electrical outlets. 5. Turn on the computer and the monitor. When the computer beeps, wait for approximately 10 seconds. 6. Turn off the computer by holding the power button for approximately four seconds. 7. Disconnect all power cords from electrical outlets.
Chapter 5. UEFI BIOS 21

8. Move the jumper back to the standard position. 9. Reinstall all the parts that have been removed. Then, reconnect the power cords for the computer and
the monitor to electrical outlets. 10. Turn on the computer and the monitor. When the logo screen is displayed, press F1 or Fn+F1. 11. To prevent data loss, ensure that BIOS settings are restored to an earlier point.
22 User Guide

Chapter 6.

Diagnostics

Use diagnostic solutions to test hardware components and report operating- system-controlled settings that interfere with the correct operation of your computer.
Lenovo diagnostic tools
For information about Lenovo diagnostic tools, go to: https://pcsupport.lenovo.com/lenovodiagnosticsolutions
Use the Vantage app
The Vantage app is preinstalled on your computer. To diagnose problems with the Vantage app: 1. Type Vantage in the Windows search box and press Enter. 2. Follow the on-screen instructions and run a hardware scan.
If you are unable to isolate and resolve the problem after running the Vantage app, save and print the log files created by the program. You might need the log files when you speak to a Lenovo technical support representative.

23

24 User Guide

Chapter 7.

CRU replacement

Customer Replaceable Units (CRUs) are parts that can be replaced by the customer. Lenovo computers contain the following types of CRUs:
· Self-service CRUs: Refer to parts that can be replaced easily by customer themselves or by trained service technicians at an additional cost.
· Optional-service CRUs: Refer to parts that can be replaced by customers with a greater skill level. Trained service technicians can also provide service to replace the parts under the type of warranty designated for the customer’s machine.
If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You might be required to return the defective part that is replaced by the CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. For full details, see the Lenovo Limited Warranty documentation at: https://www.lenovo.com/warranty/llw_02
CRU list
The following is the CRU list of your computer.
Self-service CRUs · Computer cover · Drive bay assembly · Front bezel · Handle · Hard disk drive · Hard disk drive grommets · Keyboard · M.2 solid-state drive · M.2 solid-state drive heatsink · M.2 solid-state drive bracket · Memory module · Mouse · Optical drive · Optical drive bezel · Optical drive bracket · Parallel connector cable · Power cord · Serial connector cable · Smart cable clip

25

Optional-service CRUs · Power supply assembly · E-lock for selected models
Remove or replace a CRU
This section provides instructions on how to remove or replace a CRU.
Computer cover
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool. For access, do the following:
1. Turn off the computer and remove all connected devices and cables. 2. Unlock any locking device that secures the computer cover. 3. Lay down the computer to place the computer cover facing up. Removal steps
Note: If a locking device is available, use it to lock the computer after installing the computer cover.
26 User Guide

Optical drive
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, do the following:
1. Remove the “Computer cover” on page 26. 2. Disconnect the signal and power cable from the optical drive. Replacement procedure
Chapter 7. CRU replacement 27

28 User Guide

Front bezel
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, remove the following parts in order, if any: · “Computer cover” on page 26
Chapter 7. CRU replacement 29

· “Optical drive” on page 27 Replacement procedure
Handle
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. 30 User Guide

For access, remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29 Removal steps
Drive bay assembly
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29
Chapter 7. CRU replacement 31

Replacement procedure
Hard disk drive and Grommets
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines: 32 User Guide

· Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.
· Before replacing the internal storage drive, make a backup copy of all the data that you want to keep. · Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged. · Do not apply pressure to the internal storage drive. · Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks. For access, do the following:
1. Remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29 · “Drive bay assembly” on page 31
2. On the bottom of the drive bay assembly, disconnect the signal cable and the power cable from the 3.5inch primary hard disk drive.
Removal steps
Chapter 7. CRU replacement 33

M.2 solid-state drive and heat sink
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
The heat sink might be very hot. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool. Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines: · Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement. · Before replacing the internal storage drive, make a backup copy of all the data that you want to keep. · Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged. · Do not apply pressure to the internal storage drive. · Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29 · “Drive bay assembly” on page 31
34 User Guide

Removal steps Remove the M.2 solid-state drive depending on the computer model: · For computers without the heat sink for the M.2 solid-state drive:
Type 1
Type 2
· For computers with the heat sink for the M.2 solid-state drive:
Chapter 7. CRU replacement 35

M.2 solid-state drive bracket
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29 · “Drive bay assembly” on page 31 · “M.2 solid-state drive and heat sink” on page 34
36 User Guide

Removal steps
Memory module
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. Ensure that you follow the installation order for memory modules shown in the following illustration.

For access, remove these parts in order, if any: · “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29

Chapter 7. CRU replacement 37

· “Drive bay assembly” on page 31 Replacement procedure
Note: During the installation, ensure that you align the memory module to the slot and press down on both ends until the latches are fully engaged with a click.
Power supply assembly
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. Although there are no moving parts in the computer after the power cord has been disconnected, the following warnings are required for your safety.
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury, seek medical care immediately. Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. For access, do the following:
1. Remove these parts in order, if any: 38 User Guide

· “Computer cover” on page 26 · “Optical drive” on page 27 · “Front bezel” on page 29 · “Drive bay assembly” on page 31 2. Disconnect the power supply assembly cables from the system board. Removal steps
Serial connector cable
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, do the following:
1. Remove the “Computer cover” on page 26. 2. Disconnect the serial connector cable from the system board. Removal steps
Chapter 7. CRU replacement 39

Parallel connector cable
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, do the following:
1. Remove the “Computer cover” on page 26. 2. Disconnect the parallel connector cable from the system board. Removal steps
E-lock
Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, do the following:
1. Remove the “Computer cover” on page 26. 2. Disconnect the E-lock cable from the system board. Note: To remove the screws, you need a special tool (T15 star wrench). Removal steps
40 User Guide

Chapter 8.

Help and support

Self-help resources
Use the following self-help resources to learn more about the computer and troubleshoot problems.

Resources Troubleshooting and frequently asked questions Accessibility information

How to access?
· https://www.lenovo.com/tips · https://forums.lenovo.com https://www.lenovo.com/accessibility

Reset or restore Windows
Use the Vantage app to: · Configure device settings. · Download and install UEFI BIOS, drivers and firmware
updates. · Secure you computer from outside threats. · Diagnose hardware problems. · Check the computer warranty status. · Access User Guide and helpful articles.

· Use Lenovo recovery options. 1. Go to https://support.lenovo.com/ HowToCreateLenovoRecovery. 2. Follow the on-screen instructions.
· Use Windows recovery options. 1. Go to https://pcsupport.lenovo.com. 2. Detect your computer or manually select your computer model. 3. Navigate to the troubleshooting menu to diagnose the operating system for recovery instructions.
Type Vantage in the Windows search box.

Note: The available features vary depending on the computer model.
Product documentation: · Safety and Warranty Guide · Generic Safety and Compliance Notices · Setup Guide · This User Guide · Regulatory Notice

Go to https://pcsupport.lenovo.com. Then, follow the onscreen instructions to filter out the documentation you want.

41

Resources Lenovo Support Web site with the latest support information of the following: · Drivers and software · Diagnostic solutions · Product and service warranty · Product and parts details · Knowledge base and frequently asked questions
Windows help information

How to access?
https://pcsupport.lenovo.com
· Type Get Help or Tips in the Windows search box. · Use Windows Search or the Cortana® personal
assistant. · Microsoft support Web site:
https://support.microsoft.com

Call Lenovo
If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center.
Before you contact Lenovo
Prepare the following before you contact Lenovo: 1. Record the problem symptoms and details: · What is the problem? Is it continuous or intermittent? · Any error message or error code? · What operating system are you using? Which version? · Which software applications were running at the time of the problem? · Can the problem be reproduced? If so, how? 2. Record the system information: · Product name · Machine type and serial number The following illustration shows where to find the machine type and serial number of your computer.

42 User Guide

Lenovo Customer Support Center
During the warranty period, you can call Lenovo Customer Support Center for help.
Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to: https://pcsupport.lenovo.com/supportphonelist
Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.
Services available during the warranty period · Problem determination – Trained personnel are available to assist you with determining if you have a
hardware problem and deciding what action is necessary to fix the problem. · Lenovo hardware repair – If the problem is determined to be caused by Lenovo hardware under warranty,
trained service personnel are available to provide the applicable level of service. · Engineering change management – Occasionally, there might be changes that are required after a product
has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes (ECs) that apply to your hardware available.
Services not covered · Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts · Identification of software problem sources · Configuration of UEFI BIOS as part of an installation or upgrade · Changes, modifications, or upgrades to device drivers · Installation and maintenance of network operating systems (NOS)
Chapter 8. Help and support 43

· Installation and maintenance of programs For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product, see Safety and Warranty Guide that comes with your computer.
Purchase additional services
During and after the warranty period, you can purchase additional services from Lenovo at: https://pcsupport.lenovo.com/warrantyupgrade Service availability and service name might vary by country or region.
44 User Guide

Appendix A. Compliance information
For more compliance information, refer to Regulatory Notice at https://pcsupport.lenovo.com and Generic Safety and Compliance Notices at https://pcsupport.lenovo.com/docs/generic_notices.
Certification-related information
Product name: Lenovo V50t-13IMH
Machine types: 12J5 and 12J6
Further compliance information related to your product is available at https://www.lenovo.com/compliance.
Operating environment
Maximum altitude (without pressurization) · Operating: From 0 m (0 ft) to 3048 m (10 000 ft) · Storage: From 0 m (0 ft) to 12192 m (40 000 ft) Temperature · Operating: From 5°C (41°F) to 35°C (95°F) · Storage:
For common desktop computers: From -40°C (-40°F) to 60°C (140°F) For all- in-one desktop computers: From -20°C (-4°F) to 60°C (140°F) Relative humidity · Operating: 20%-80% (non-condensing) · Storage: 10%90% (non-condensing)

45

46 User Guide

Appendix B. Notices and trademarks
Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent programs covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc. 8001 Development Drive Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
Changes are made periodically to the information herein; these changes will be incorporated in new editions of the publication. To provide better service, Lenovo reserves the right to improve and/or modify the products and software programs described in the manuals included with your computer, and the content of the manual, at any time without additional notice.
The software interface and function and hardware configuration described in the manuals included with your computer might not match exactly the actual configuration of the computer that you purchase. For the configuration of the product, refer to the related contract (if any) or product packing list, or consult the distributor for the product sales. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

47

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development- level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice. For the latest information or any questions or comments, contact or visit the Lenovo Web site: https://pcsupport.lenovo.com Trademarks LENOVO and LENOVO logo are trademarks of Lenovo. Intel and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft, Windows and Cortana are trademarks of the Microsoft group of companies. DisplayPort is a trademark of the Video Electronics Standards Association. The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Wi-Fi and Miracast are registered trademarks of Wi-Fi Alliance. USB-C is a registered trademark of USB Implementers Forum. All other trademarks are the property of their respective owners.
48 User Guide