Proxicast UIS-722b Smart Switches Instruction Manual
- June 10, 2024
- proxicast
Table of Contents
Proxicast UIS-722b Smart Switches
For model: UIS-722b
Setup Outlet to Auto Reset when Ping Fails
Network Diagram
Hardware Setup
- Step 1: Connect MSNswitch power plug to a wall outlet.
- Step 2: Connect Modem to Outlet #1, and Router to Outlet #2.
- Step 3: Connect LAN cable from Router to MSNswitch. The Internet LED will tum ON to indicate online.
- Step 4: Press and hold UIS ON / OFF button (2 seconds) to enable Auto Reset function.
Description
LED Indicators
| LED | ON | OFF | BLINKING |
|---|---|---|---|
| Internet | Online | Offline | IP has a timeout |
| Cloud Link | Device linked & is connected to server | Device not linked to a | |
| Cloud account | The device not linked & is connected to the server | ||
| UIS ON/ OFF | Enabled (Auto Reset) | Disabled (Manual Control) | -n/a- |
| LED (Status) | Description |
|---|---|
| #1, UIS & #2 (Blinking) | Reset to Factory Default |
| All LEDs (Blinking) | Firmware Upgrading. DO NOT interrupt or power off |
| LED (Status) | Description |
| #1, UIS & #2 (Blinking) | Reset to Factory Default |
| All LEDs (Blinking) | Firmware Upgrading. DO NOT interrupt or power off |
Add Device to APP & Cloud4UIS
- Step 1: Install ezDevice APP, and [Sign Up] for a Cloud4UIS Account.
- Step 2: Add Device to Cloud4UIS Account
NOTE:
- Once the device is ‘Added’, the Cloud Link LED will change from BLINKING to ON.
- The first person to ‘Add’ the device becomes the ‘Owner’.
- Each device can only have one ‘Owner’.
- ‘Owner’ can ‘Share’ device with other CloudUIS user and set these user’s access permission.
Access Device Web User Interface
Access Device Web User Interface (GUI)
Access to all MSNswitch functionality is available via it’s web user interface. Enter MSNswitch IP address into any browser.
- http://
- eg.: http://192.168.0.123
NOTE:
- Check router DHCP table for IP address.
- For first time login (or after a factory default) user must create an administrator account and password.
Setup Instant Messaging
Setup Instant Messaging (Skype)
- Step 1: Login to http://
- Step 2: Go to Configuration – Skype -> [Enable] and click the “Auto Rebooter” link.
- Step 3: Add “Auto Rebooter” robot to your Skype contacts and begin a messaging session.
- Step 4: Type Help -> [Get My ID] to generate a unique ID. Copy and paste to [My ID] in MSNswitch. Click [Add] to save.
NOTE: Skype is owned by Microsoft. Use of Skype is subject to Microsoft usage terms and conditions.
More Information
Scan QR Code for Guide
ezDevice APP available from:
- For the latest firmware, please visit http://www.MSNswitch.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>