proxicast 4G LTE Cross-Polarized Antenna User Guide

**proxicast 4G LTE Cross-Polarized Antenna User Guide

**

Applications

• High Gain Directional Signal Enhancement
• 4G/LTE Modems, Routers & Hotspots
• Poor Signal Coverage Areas
• Indoor or Outdoor Use
• Home / Office / Commercial Installations

Product Features

• Cross-Polarized MIMO Elements for Improved Signal Quality & Performance
• Wide Beamwidth for Easy Positioning
• Weatherproof, Compact & Light-weight
• N Female Connectors
• Pole or Wall Mountable
• Compatible with all 4G/LTE Networks
• Compatible with most 4G/LTE Modems/Routers

Ordering Information

Part No

|

Description

---|---
ANT-129-001| Proxicast 4G/LTE CrossPolarized (MIMO) 7-10 dBi Fixed-Mount Panel Antenna

General Description

Proxicast’s dual polarized directional LTE MIMO antenna is ideal for signal enhancement in virtually any cellular application.

It is compatible with all 3G and 4G/LTE data services from Verizon, AT&T, Sprint, T-Mobile, Bell Mobility, Rogers, Telus and most other cellular operators worldwide.

The antenna incorporates two separately fed ultra wide band elements in a single housing which focus radio energy into a 75 degree beam enabling connection to distant cell towers. The elements are set at 45 degree angles to provide cross-polarized multiple input / multiple output (MIMO) connectivity for LTE radio  equipment  resulting in higher performance.

With appropriate adapter cables (not included), this antenna is compatible with cellular modems, hotspots and routers from Cisco, Cradlepoint, Digi, Pepwave,  Proxicast, Sierra Wireless and others.

The antenna’s compact, light-weight rugged housing, heavy duty mounting hardware and corrosion-resistant materials make it ideal for outdoor applications  including building rooftops, utility poles, or surveillance trailers.

Electrical Specifications

Parameter

|

Rating

---|---

–

|

698~960 MHz

Frequency Range

(all major cellular bands)

|

1710~2030 MHz 2110~2200 MHz 2300~2390 MHz

–

|

2500~2690 MHz

Peak Gain

|

7 -10 dBi frequency dependent

Beam Width Horizontal

|

70° / 75°

Beam Width Vertical

|

75° / 60°

VSWR

|

≤1.8:1

Input Impedance

|

50 Ohm

Polarization

|

Vertical + Horizontal @ ±45° (90° relative)

Max Input Power

|

50 W

Ground Plane

|

Not Required

DC Grounded

|

No

Mechanical Specifications

Parameter

|

Rating

---|---

Connector Type

|

2x N Female (jack)

Cable Length

|

12 in (300mm) RG58U low-loss coax

Mounting

|

Pole or Wall – Pole Mounting Bracket included 1.2 in min, 2.0 in max dia pole (30 – 50 mm)

Dimensions

|

11.8 x 7.2 X 2.75 in (300 x 183 x 70 mm)

Materials

|

Radome: UV stabilized ABS plastic Connector: Brass Mounting: Aluminum / Stainless U-Bolts: Hot Dipped Galvanized Steel

Antenna Color

|

Ivory

Weight

|

1.4 lb (0.64 kg) excluding mounting hardware

Operating Temperature

|

-40°C to +60°C

Electrical Characteristics

• **VSWR

**

• Efficiency
  
  

Radiation Patterns

• 800 MHz
  
  

• 1900 MHz
  
  

• 2700 MHz
  

Product Dimensions

All dimensions in mm

1. ANTENNA -TOP
   

2. ANTENNA BACK
   
   

3. **“U” BOLT

**

4. MOUNTING PLATE
   
   

5. SECTION A-A
   
   

6. CLAMP
   

Additional Product Images

Installation Instructions

1. Antenna
2. Pole (Not included)
3. N Female Connector
4. M8 U Bolt (x2)
5. Clamp (x2)
6. Pole Mounting Plate
7. M5 X 10mm OD Flat Washer (x4)
8. M5 x 8mm OD Lock Washer (x4)
9. Nut (x4)
10. M5 x 8mm OD Lock Washer (x4)
11. Nut (x4)

Directional Antenna Installation Tips

• Determine location of nearest cell tower for your carrier (see opensignal.org or cellreception.com)
• Orient antenna so cables point downward
• Mount antenna to 2.0 inch max diameter mast or to wall as high as possible
• Point antenna toward cell tower
• Point away from:
  •  other antenna
  •  trees & buildings
  • large vertical metal or concrete object
•  Adjust antenna position left/right and up/down tilt to find optimal signal
•  Keep coax lead cable as short as possible & weatherproof all outdoor connectors
• Observe safety codes regarding lightning protection, grounding, and mast height

Contact Information

For the latest specifications, additional product information, worldwide sales and information about Proxicast :

Web: www.proxicast.com
Tel: 1-877-777-7694
Email: sales@proxicast.com 1-412-213-2477

Proxicast

• 312 Sunnyfield Drive, Suite 200
• Glenshaw, PA 15116 USA

For technical questions and application information:

Email: support@proxicast.com

Important Notice

The information contained herein is believed to be reliable. Proxicast makes no warranties regarding the information contained herein. Proxicast assumes no responsibility or liability whatsoever for any of the information contained herein. Proxicast assumes no responsibility or liability whatsoever for the use of the  information contained herein. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice.

The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Proxicast products are not warranted or  authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to  cause severe personal injury or death.

References

• CellReception | Find a better signal.
• Proxicast: Pro-Grade Wireless Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>