proxicast ANT-127-002 10 dBi Omni-Directional 5G Fiberglass Antenna Instruction Manual

proxicast ANT-127-002 10 dBi Omni-Directional 5G Fiberglass Antenna

Electrical Specifications

• Frequency Range: 4G/LTE and sub-6 GHz 5G frequencies
• Peak Gain: 10 dBi
• VSWR: < 2.0
• Input Impedance: Not specified
• Polarization: Vertical
• Max Input Power: Not specified

Mechanical Specifications

• Connector Type: N Female (jack) integrated into base of the antenna
• Length: 25.6 in / 650 mm with bracket: 27.5 in / 700 mm
• Diameter: .98 in / 25 mm
• Weight: 1.3 lbs / 0.59 kg

Applications

• 4G/LTE & 5G Sub-6 Routers & Modems
• Cellular Amplifiers
• Signal Challenged Locations Requiring High Gain Omni-Directional Antennas
• Pole & Wall Mount Options

Product Features

• Compatible with most Cellular Modems/Routers
• Compatible with all 4G/LTE & 5G Sub-6 Networks
• Integrated N Female Connector
• No Ground Plane Required
• White Polyurethane Coated Fiberglass
• 24 inches Tall

Ordering Information

General Description

Proxicast’s 24-inch easy-to-install permanent mount omnidirectional antenna improves transmit and receive signals for all 4G/LTE and sub-6 GHz 5G frequencies on Verizon, AT&T, T-Mobile, US Cellular, Bell Mobility, Rogers, Telus, Sasktel, Telcel, Movistar, Digicel and many other cellular operators worldwide.
The omnidirectional design provides high gain without the cellular tower location and alignment hassles of directional antennas.
Its gloss white finish blends into any environment and makes it ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, homes and offices.
With the appropriate adapter cable (not included), this antenna is compatible with Mi-Fi Hotspots, external 4G/5G cellular modems, routers and signal amplifiers from companies such as CalAmp, Cisco, Cradlepoint, Digi, Inseego, MoFi, Netgear, Pepwave, Proxicast, Sierra Wireless, SureCall, Wilson and ZTE.
For MIMO applications use 2 identical antennas. Proxicast’s XBOOM Cross-Over Bracket (ANT-800-XB1) makes it easy to mount 2 antennas on a single vertical mast.

ANT-127-002
10 dBi Omni-Directional 4G/5G Fiberglass Antenna

Electrical Specifications

Parameter                                 Rating

Frequency Range| 600 – 6000 MHz
Peak Gain| 10 dBi
VSWR| ≤ 3:1 in band
Input Impedance| 50 Ohm
Polarization| Vertical
Max Input Power| 100 W
DC Grounded| No
Ground Plane| Not Required

Mechanical Specifications

Parameter                                 Rating

Connector Type| N Female (jack) integrated into base of antenna
Length| 25.6 in / 650 mm with bracket: 27.5 in / 700 mm
Diameter| .98 in / 25 mm
Weight| 1.3 lbs / 0.59 kg
**** Materials| UV stabilized polyurethane coated fiberglass, stainless, steel, aluminum -RoHS compliant
Antenna Color| Gloss White
Operating Temperature| -50°C to +70°C
Mounting| Pole/Wall Mount via integrated bracket (2.0” dia. U-bolt included)

Operation of this device outside the parameter ranges given above may cause permanent damage.

Electrical Characteristics

Highlighted areas represent the primary 3G/4G/LTE frequency bands.

Radiation Patterns

780 MHz

1940 MHz

3480 MHz

5880 MHz

Mechanical Dimensions

Dimensions in millimeters

Additional Product Images

Installation Instructions

• Orient antenna vertically

• Position away from:

  • CRT/TVs
    Lighting fixtures & motors

  • Other antennas & wireless devices

  • Low-E or tinted/coated windows

  • Large vertical metal or concrete objects

• Mount as high as possible

• Weather seal outdoor coax connections

• Fully tighten coax connector to antenna connector

• Install in-line lightning protection if required by local building, fire, insurance or safety codes

• Use 2 identical antennas if modem supports diversity or MIMO

Contact Information

For the latest specifications, additional product information, worldwide sales and information about Proxicast:

• Web: www.proxicast.com
• Tel: 1-877-777-7694
• Email: sales@proxicast.com 1-412-213-2477
• Proxicast • 312 Sunnyfield Drive, Suite 200 • Glenshaw, PA 15116 USA

For technical questions and application information:

Email: support@proxicast.com

Important Notice

The information contained herein is believed to be reliable. Proxicast makes no warranties regarding the information contained herein. Proxicast assumes no responsibility or liability whatsoever for any of the information contained herein.
Proxicast assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice.
The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Proxicast products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

Data Sheet : Rev C 03/01/23
© Copyright Proxicast, LLC. All rights reserved.

Disclaimer: Subject to change without notice www.proxicast.com • 1-877-777-7694

References

• Proxicast: Pro-Grade Wireless Solutions
• Proxicast: Pro-Grade Wireless Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>