MAXIM LIGHTING 30316CRAR Eight Light Chandelier User Manual
- June 8, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 30316CRAR Eight Light Chandelier
Please consult your electrician for hanging fixture and wiring.
Light Source : 8 E1240W (Not include)
Made in China / Hecho en China / Fabrique en China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep anypackaging materials away from children
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
-
On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
-
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
-
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner. -
Periodically (every 90 days) make sure that the screws are fully tightened.
-
Prolonged exposure to heat sourcesmay cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting,started,ensure the package contains the following components:
INSTALLATION
Run wire through stems and combine stem lengths to meet desired mounting height