KARCHER WD 5 P Wet and Dry Vacuum Cleaner Instruction Manual
- June 3, 2024
- Karcher
Table of Contents
WD 5 / WD 5 S / WD 5 P / WD 5 P S /WD 6 P / WD 6 P S
Instruction Manual
WD 5 P Wet and Dry Vacuum Cleaner
Safety instructions
Wet / dry vacuum cleaner
Read these safety instructions and the original instructions before using
the device for the first time. Act in accordance with them and store them for
later use or subsequent owners.
- In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.
- Warnings and information notices attached to the device provide important information for hazard-free operation.
Hazard levels
DANGER
- Indication of an imminent threat of danger that will lead to severe injuries or even death.
WARNING
- Indication of a potentially dangerous situation that may lead to severe injuries or even death.
CAUTION
- Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
- Indication of a potentially dangerous situation that may lead to damage to property.
General safety instructions
DANGER
- Risk of asphyxiation. Keep packaging film out of the reach of children.
WARNING
- Only use the device for its proper use. Take into account the local conditions and beware of third parties, in particular children, when working with the device.
- Persons with reduced physical, sensory or mental capabilities and persons lacking experience and knowledge may only use the appliance if they are properly supervised, have been instructed on use of the appliance safely by a person responsible for their safety, and understand the resultant hazards involved.
- Only people who have been instructed on how to use the device, or have proven their ability to operate it, and have been explicitly instructed to use it, must use the device.
- Children must not operate the device.
- Children from the minimum age of 8 may use the appliance if they are properly supervised or have been instructed in its use by a person responsible for their safety, and if they have understood the resultant hazards involved.
- Children must be supervised to prevent them from playing with the appliance.
- Children may only perform cleaning work and user maintenance under supervision.
CAUTION
- Safety devices are provided for your own protection. Never modify or bypass safety devices.
Risk of electric shock
DANGER
- Only connect the device to alternating current. The voltage indicated on the type plate must match the voltage of the power source.
- Never touch the mains plug and socket with wet hands.
- Only operate the device via a fault current protection switch (maximum 30 mA).
- Do not immerse the device in water.
WARNING
- Only connect the device to an electrical connection which has been set up by a quali-fied electrician as per IEC 60364-1.
- Check the power supply cable with mains plug for damage before operation each time. Do not put the device into operation with a damaged power supply cable. Have a damaged power supply cable replaced immediately by the authorised customer service / qualified electrician.
- Do not damage the power supply and extension cable by running over it, crushing or yanking it or similar. Protect the power supply cable from heat, oil and sharp edges.
CAUTION
- In case of longer breaks in operation and after use, switch off the device at the main switch / device switch and pull the mains plug.
- Switch off the device and unplug the mains plug before performing cleaning/maintenance.
- When using the device, pull the power supply cable fully out of the device. If the cable is wrapped around the cable hook, you must undo it completely.
- Do not carry/transport the device using the power supply cable.
- Do not pull the mains plug out the socket using the power supply cable.
Wet vacuum cleaning
WARNING
- In case of any foam formation or escaping liquids, switch off the device immediately and remove the mains plug.
Operation
DANGER
- Operation in explosive atmospheres is prohibited.
- Risk of explosion
- Never use the device to vacuum up combustible gases, liquids or dusts.
- Never use the device to vacuum up reactive metal dusts (e.g. aluminium, magnesium, zinc).
- Never use the device to vacuum up undiluted brine or acids.
- Never use the device to vacuum up any burning or smouldering objects/matter.
These substances can corrode the materials in use on the device.
WARNING
- Risk of injury. Do not use the nozzle and suction pipe at head height.
CAUTION
- Never leave the device unsupervised while it is in operation.
- Accidents or damage due to the device falling over.
Before all actions with or on the device, you must make sure that it is stable.
ATTENTION
- Protect the device from extreme weather conditions, moisture and heat.
- Never use the device without a filter, this can lead to device damage.
Care and service
WARNING
- Switch off the device immediately and remove the mains plug before performing any care and service work.
CAUTION
- Have repair work and work on electrical components carried out by the authorised customer service only.
ATTENTION
- Do not use scouring agents, glass or multi-purpose cleaner for cleaning.
Transport
CAUTION
- In order to prevent accidents or injuries, you must observe the weight of the device when transporting it.
Intended use
Only use the device in private households. In accordance with the
descriptions and the safety information in these operating instructions, the
device is intended for use as a wet and dry vacuum cleaner. Cold ashes may
only be vacuumed with suitable accessories. Protect the device from rain and
do not store it outdoors. Note The manufacturer accepts no liability for
possible damage caused by improper use or incorrect operation.
Environmental protection
** The packing materials can be recycled. Please dispose of packaging in
accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials
and often components such as batteries, rechargeable batteries or oil, which –
if handled or disposed of incorrectly – can pose a potential threat to human
health and the environment. However, these components are required for the
correct operation of the appliance. Appliances marked by this symbol are not
allowed to be disposed of together with the household rubbish. Notes on the
content materials (REACH) Current information on content materials can be
foundat: www.kaercher.com/REACH
Accessories and spare parts
Only use original accessories and original spare parts. They ensure that the
appliance will run fault-free and safely.
Information on accessories and spare parts can be found at
www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the packaging. Check the
contents for completeness whenunpacking. If any accessories are missing or in
the evenof any shipping damage, please notify your dealer.
Warranty
The warranty conditions issued by our relevant sales company apply in all
countries. We shall remedy possible malfunctions on your appliance within the
warranty period free of cost, provided that a material or manufacturing defect
is the cause. In a warranty case, please contact your dealer (with the
purchase receipt) or the next authorised customer service site. (See overleaf
for the address)
Description of the device
The illustrations show the device with the best possible equipment (WD 6 P S /
KWD 6 P S). Depending on the model selected, there are differences in the
equipment. The pecific equipment is described on the device packaging.
For the illustrations, refer to the graphics page.
Illustration A**
1 Suction hose connection
2 Rotary switch
(with power regulation for devices with a socket)
3 Power socket
4 Blower function
5 Filter cleaning button
6 Parking position handle
7 Carrying handle
8 Recessed grip
9 Storage area
10 Filter box and unlocking button
11 Cable hook
12 Suction hose storage (both sides)
13 Rating plate with technical data (e.g. container size)| 14 Accessory
storage
15 Mains connection with mains plug
16 Parking position for floor nozzle
17 Steering roller
18 Drain screw
19 Filter bag
20 Flat pleated filter
21 Removable handle with electrostatic protection
22 Suction hose with connection piece
23 Suction tubes 2 x 0.5 m
24 Crevice nozzle
25 Floor nozzle
26 Flexible tool hose
27 Adapter for connecting power tools
---|---
Mount the steering rollers and support for the accessory holder
- The carrying handle also serves to lock the devicehead and container. To unlock, swivel the bracket all the way forward until the lock is free. Illustration B
- Before initial startup, remove the contents from the container and mount the steering rollers. Illustration C Illustration D
- Clip the support for the accessory mounting on the back of the device head. Illustration E
Note
For versions with stainless steel tubes, remove the protective cover before
initial startup.
Initial startup
Inserting the filter bag
- Fully unfold the filter bag.
- Attach the filter bag to the device connection anpress it on firmly. Illustration F
- Fit and lock the device head. Illustration G
Accessory application
-
Connect the suction hose. Illustration H
-
Connect the suction hose to the handle. Illustration I.
Illustration I
Note For convenient vacuuming in confined spaces, the handle can be removed, and the accessories plugged directly onto the suction hose. To release the handle, the grey areas on both sides ofthe handle must be pressed, and the handle pulled from the hose. -
Connect the floor nozzle to the suction tubes.
• Use the position with the brush strips extendedvacuum dry dirt.
• Use the position with squeegees extended to suck up damp dirt / water.
Illustration J
Starting up the device
-
Plug the mains plug into the socket.
Illustration K
Devices without a socket -
Set the trigger into the desired position.
Illustration L
• Position “1 ON”: The suction / blower function isactivated.
• Position “0 OFF”: The device is switched off. Devices with a socket -
Set the trigger into the desired position.
Illustration M
•”MAX” position: The suction / blower function is activated.
• Position MAX: When the power tool is con- nected, the suction is activated automatically.
• Position “0 OFF”: The device is switched off.
Note
As long as the device is supplied with power, the device socket can be used as
a power source.
Operation
ATTENTION
Flat pleated filter missing Device damage Always work with the flat pleated
filter inserted.
Note Pay attention to the latest part numbers when purchasing and
installing filter bags and flat pleated filters. Information on accessories
and spare parts can be found at www.kaercher.com.
Dry vacuuming
ATTENTION
Vacuuming cold ashes
Device damage Only vacuum cold ash with an ash pre-separator.
ATTENTION
Defective or wet flat pleated filter
Device damage
Before initial startup, check the flat pleated filter for damage and replace
it if necessary.
Only vacuum with a dry flat pleated filter.
Note
Replace the filter bag in good time, as a filter bag that is too full could be
damaged. The fill degree of the filter bag depends on the amount of dirt
vacuumed. The filter bag should be replaced more frequently when vacuuming
fine dust, sand, etc.
Wet vacuuming
ATTENTION
Wet vacuuming with a filter bag Device damage Do not use a filter bag when
vacuuming wet.
ATTENTION Operation with full container When the container is full, a
float switch closes the suction opening and the device runs at a higher speed.
Switch off the device immediately and empty the container. Note If the device
falls over, the float can also close. To make the device capable of vacuuming
again, set up the device, switch it off, wait 5 seconds and then switch it on
again.
Working with power tools (only for devices with a built-in socket)
CAUTION
Unintentional starting of the power tool Injury or property damage
Make sure that the power tool is ready for operation as soon as it is
connected to the device socket.
Note
Depending on the model selected, an adapter or an adapter and a thin tool hose
are included in the scope of delivery.
-
Connect the suction hose. Illustration H
-
If necessary, the adapter can be adjusted to the connection diameter of the power tool with a suitable tool. 3
-
Option A) Put the adapter on the handle of the suction hose. Connect the suction hose to the adapter on the power tool.
Option B) For more flexibility when working, connect the adapter to the thin tool hose and the handle of the suction hose and connect it to the power tool.
Option C) With some power tools, the handle of the suction hose can be connected directly to the power tool. Illustration N -
Plug the mains plug of the power tool into the device socket. Illustration O
-
Set the trigger to MAX Set. The power can be regulated using the rotary switch. The suction is activated automatically. Illustration M
Note
Note the maximum connected load (see information on the device socket).
Note
As soon as the power tool is switched on, the suction turbine starts up with a
0.5 second delay. If the power tool is switched off, the suction turbine
continues to run for pprox. 5 seconds in order to suck in the residual dirt
in the suction hose.
Integrated filter cleaning system
Note
The filter cleaning system is designed for vacuuming large quantities of
fine dust without a filter bag inserted. The filter cleaning system allows the
soiled flat fold filter to be cleaned at the push of a button and the suction
performance to be increased again.
- Place the handle of the suction hose in the designated parking position on the device head. Press the filter cleaning button three times with the device switched on, waiting 4 seconds between the individual actuations. Illustration P
Note
After pressing the filter cleaning button several times, check the container
for its filling volume. Otherwise dirt can escape when the container is
opened
Blower function
The blower function can be used to clean areas that aredifficult to reach
or where vacuuming is not possible, e.g. leaves in a gravel bed.
- Insert the suction hose into the blower connection.The blower function is now activated. Illustration Q
Interrupting operation
- Set the trigger to “0 OFF”. The device is switched off.
- Variant 1: Place the handle of the suction hose in the intermediate parking position.
Variant 2: Attach the floor nozzle in the parking position. Illustration R
Ending operation
-
Set the trigger to “0 OFF”. The device is switched off.
-
Pull out the mains plug.
-
Remove the device head. Illustration B
-
Empty the container. On the devices that have a drain screw, the container can be emptied via the drain screw. Illustration S
-
Storage possibility: Illustration Y
Note
The suction hose can be wrapped around the device head and attached to the device head with the help of the hose collar. -
Store the device in a dry and frost-proof room.
Care and service
General care instructions
- Clean the device and plastic accessory parts with a commonly available plastic cleaner.
- Rinse the container and accessories with water, as necessary, and dry them before further use.
Clean the filter box / flat pleated filter
- Unlock the filter box and fold it out. Illustration T
- Remove the filter box. Illustration U
- Empty the filter box into a waste container. In the case of heavy soiling, tap the filter box against the edge of the waste container. The flat pleated filter does not have to be removed from the filter box. Illustration V If necessary, clean the flat pleated filter separately.’
- To do this, remove the flat pleated filter from the filter box. Illustration W
- Clean the flat pleated filter under running water. Do not rub or brush off. Allow the flat pleated filter to dry completely before reusing. Illustration X We recommend cleaning the flat pleated filter after each use.
Troubleshooting guide
Malfunctions often have simple causes that you can remedy yourself using the
following overview. When in doubt, or in the case of malfunctions not
mentioned here, please ontact your authorised Customer Service.
Declining suction performance
Accessories, the suction hose or the suction tubes are clogged.
- Remove the clog with a suitable aid. The filter bag is full
- Replace the filter bag. The flat pleated filter is dirty.
- Clean the flat pleated filter (see Chapter Clean the filter box / flat pleated filter). The flat pleated filter is damaged.
- Replace the flat pleated filter.
Technical data
Note: The technical data can be found on the type plate.
THANK YOU!
MERCI! DANKE! GRACIAS!
Registreren your Product and benefit From many advantages.
www.kaercher.com/welcome
Rate your product and tell us your opinion.
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
References
- Cleaning equipment and pressure washers | Kärcher International
- Dealer Search | Kärcher International
- Home and Garden Warranty Registration USA - Kärcher
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>