MOTORCYCLE AUDIO M5-800X4 Marine 4-Channel Motorcycle Speakers User Guide
- June 3, 2024
- MOTORCYCLE AUDIO
Table of Contents
MOTORCYCLE AUDIO M5-800X4 Marine 4-Channel Motorcycle Speakers User Guide
AMPLIFIER TUNING
Before installing amplifier, remove cover and set PRESET to OFF position.
Verify remaining settings are properly configured. Replace cover for water-
tight protection.
TEST & SETUP
After system is installed, test for proper operation and adjust radio settings to below configurations.
INTERNAL AMPLIFIER:
Set to ON position.
BALANCE:
Test left/right balance control.
Set to CENTER position.
FADER:
Test front/back fader control.
Set to DESIRED rider position.
7-BAND EQ:
Set to FLAT position.
PUNCH EQ:
Set GAIN to 0.
CROSSOVER:
FRONT HPF: 60 Hz @ 12dB/Octave
REAR HPF: 60 Hz @ 12dB/Octave
SUB LPF: APF (All Pass Filter)
AUDIO KIT PRESET:
These presets are exclusively designed for Rockford Fosgate M5-800X4 or
TM400X4ad amplifiers combined with TMS speakers due to their unique frequency
response. These presets are not for use with other amp or speaker brands.
To select a preset:
-
Press & Hold MENU to access SETTINGS.
-
Rotate VOLUME, press to select AUDIO.
-
Rotate VOLUME, press to select
AUDIO KIT PRESET. -
Radio will automatically load preset and reboot