Shure DH5 DuraPlex Omnidirectional Headset User Manual

: June 8, 2024
: Shure

Table of Contents

DH5
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DH5

DuraPlex™ Omnidirectional Headset

General Description

DuraPlex DH5

The DuraPlex DH5 omnidirectional headset microphone is ideal for both speech and performance applications that require durability and minimal visibility. The bendable lightweight headset features switchable boom mounting placement and a neutral clear design to be used with any DH5 color variant. The certified IP57 rated headset can withstand challenging conditions involving sweat and dust for use in theater, corporate events, and TV broadcast applications. Each microphone is supplied with a storage pouch, single tie clip, vocal presence frequency response cap, snap fit windscreen, foam windscreen, and TA4F threaded adapter.

Features

IP57 Certified dust resistant and waterproof/sweatproof headset
5mm omnidirectional subminiature design for discrete placement and improved gain before feedback
1.6mm PLEX Cable technology, paintable cable, and no memory effect
Professional sound quality for speech and performance applications
High RF immunity, compatible with digital wireless systems without RF interference
Attachable Presence Cap included for tailored frequency response in speech applications
Included furnished accessories for storage, mounting options, and wind protection
TA4F and LEMO terminations for variable wireless system connectivity
Universal clear headset frame with switchable boom mount placement
Available in Black, Tan, Cocoa finishes

Care and Maintenance

The DuraPlex omnidirectional microphone has been IP57 dust-protected, waterproof rated by extensive internal tests, so you can clean it using distilled water and a mild detergent when necessary.

Adjusting the Headband and Microphone

Adjusting the Headband and Microphone 1

Reversing the Boom

The microphone boom can be positioned on the left or right side of the head.

Reversing the Boom 1

Reversing the Boom 2

Squeeze the earpiece towards the headband.
Push out the boom arm and boom pivot.
On the other side, repeat the steps to remove the boom pivot.
Move the boom arm to the preferred side, ensuring that the boom arm is placed in the slot in the boom pivot.
Squeeze each earpiece towards the headband to push boom pivots back into place.

Presence Cap

Frequency Response

Frequency Response

Attaching the Windscreen

There are two windscreens for use with the DuraPlex microphone:

A slide-fit windscreen for use with the presence cap
A snap-fit windscreen for use without the presence cap
Note: Do not use the snap-fit windscreen with the presence cap–the presence cap can become caught inside the snap-fit windscreen.

Using the Collar Clip

Accessories

Furnished Accessories

Furnished Accessories

Accessories are available in Black (/B), Tan (/T), AND Cocoa (/C) color varieties. Please consult your Shure representative for available options.

Optional Accessories

Optional Accessories

Replacement Parts

Replacement Parts 1

Replacement Parts 2

Replacement Parts 3

Threaded Mount Instructions

Wiring and Termination

Typical Wiring Table

Typical Wiring Table

Note: The conductors have a black, protective coating that you must remove with isopropyl alcohol to see their actual color.

MTQG Connector Assembly

MTQG Connector Assembly

Note: Make sure to solder the shield to ground collar.

MTQG Connector Assembly 1

Specifications

Note:

All specification values are based on using a typical bodypack with 5 V bias input or the RPM400MTQG preamplifier. When using the RPM400LEMO amplifier, refer to the RPM400LEMO specifications.
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.

Microphone Capsule

MEMS

Polar Pattern

Omnidirectional

Frequency Response

20 Hz to 20 kHz

Sensitivity

-42.5 dBV at 1 kHz[1]

Self-Noise, A-Weighted, Equivalent Acoustical

31 dB SPLA

Signal-To-Noise Ratio [2]

63.0 dB