TOGO True Wireless Earbuds User Manual
- June 3, 2024
- TOGO
Table of Contents
True Wireless Earbuds
User Manual
QUICK START
CHARGE
Fully charge your ToGo True Wireless Earbuds charging case with the included USB-C charging cable and any USB charger.
PAIR
Open the charging case and remove earbuds.
Insert them in your ears and you will hear “Power On”
Pairing mode is automatically enabled when you first power on your new earbuds
or when a previously paired device is not detected On your Bluetooth® audio
source, add a new device and look for “ToGo Wireless” You will hear a
“connected” voice prompt
PLAY
Your True Wireless Earbuds are now charged, paired, and ready to use.
ADVANCED FEATURES
TOUCH CONTROLS:
Your ToGo True Wireless Earbuds are equipped with touch controls for your
mobile device. See below for a complete list of controls:
| MEDIA CONTROLS
---|---
Left Earbud| Right Earbud
ONE TAP| volume –| volume +
TWO TAPS| Pause/Play
THREE TAPS| Previous Track| Next Track
HOLD| Summon Virtual Assistant
DURING AN ACTIVE CALL
Left Earbud| Right Earbud
Answer/End Call
Ignore incoming call
CHARGING:
Earuds
As soon as they are inserted into the charging case, a red light on each
earbud will illuminate to indicate they are charging. The light will turn off
when the earbuds are fully charged.
Charging case
Connect one end of the supplied USB-C charging cable to any USB charger and
the other end to the USB-C part of the charging case.
A flashing red light next to the USB-C port indicates the case is charging.
When the red light stops flashing and is on steady, case charging is complete.
A blue light next to the USB-C port indicates that the case is charging the
earbuds inside.
The blue light will turn off when earbud charging is complete.
TECHNICAL SPECIFICATIONS
Charging case:
Input: SV DC 1000 mA
Output for Earphone charging: SV DC 100 mA
Earbuds:
Rated Listening time on a single charge 2-3 Hours
Charging Time lhr
Maximum 10m range, 3-5m effective range
Thank you for choosing BlueDiamond™! Since 1987, our mission has been to
create products which make technology accessible and empower people to use it
more effectively. We would love any feedback or comments you may have
regarding this, or any other BlueDiamond™ product you own. Contact Us: help
@blue-diamond.ca
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>