ZERO WATER 6 CUP, 8 CUP, 10 CUP, 12 CUP Assembly Instructions Manual
- June 8, 2024
- ZeroWater
Table of Contents
Instructions Manual
ZERO WATER 6 CUP, 8 CUP, 10 CUP, 12 CUP Assembly
1. REMOVE
REMOVE lid and water reservoir from top of the pitcher and remove filter from packaging. Unscrew the blue protective cap (if applicable).
2. TWIST
TWIST filter into the bottom of reservoir (from below) and tighten filter to obtain a complete seal with the reservoir. Do not drop the filter in from above. Tighten until there is a complete seal between the filter, o-ring and reservoir.
3. FILL
FILL reservoir with cold tap water and place lid on top. Allow all water to pass through the filter before filling again.
4. POUR OR DISPENSE
POUR OR DISPENSE using spigot (if applicable) to fill your cup or glass once the reservoir has emptied into the body.
CLEANING INSTRUCTIONS
Clean your device in warm water using mild soap. Rinse and dry thoroughly.
Read More About This Manual & Download PDF:
ZERO WATER 6 CUP, 8 CUP, 10 CUP, 12 CUP Assembly Instructions Manual –
Download [optimized]
ZERO WATER 6 CUP, 8 CUP, 10 CUP, 12 CUP Assembly Instructions Manual –
Download
Questions about your Manual? Post in the comments!