INSIGNIA NS-PNK6811/ NS-PNK6811-C Wireless Keyboard with Touch Pad Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
Quick Setup Guide | NS-PNK6811/NS-PNK6811-C
Wireless Keyboard with TouchPad
PACKAGE CONTENTS
- Wireless keyboard
- USB nano receiver
- AA batteries (2)
- Quick Setup Guide
SYSTEM REQUIREMENTS
- Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, or Mac OS 10.X or higher.
- One available USB port
FEATURES
Before using your new product, please read these instructions to prevent any damage.
INSTALLING THE USB NANO RECEIVER AND BATTERIES
-
Plug the USB nano receiver into an available USB port on your computer. Windows automatically finds and installs the appropriate driver.
-
Turn your keyboard over and open the battery compartment.
-
Insert two AA batteries (included) into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment. The keyboard automatically detects the USB nano receiver.
Notes:
• If the keyboard and USB nano receiver do not automatically pair, you can force them to pair by pressing the Esc, 1, and = keys simultaneously on the keyboard. The low battery/pairing indicator LED on the keyboard blinks while in pairing mode (10 seconds).
• A low battery LED indicator notifies you when you need to change batteries. -
Close the battery compartment and turn the keyboard over. You can immediately begin using your keyboard.
USING THE TOUCHPAD
CLEANING YOUR KEYBOARD
- Wipe the keyboard with a damp, lint-free cloth.
SPECIFICATIONS
Keyboard:
- Dimension (L×W×H): 16 × 5.8 × .8 in. (40.6 × 14.9 × 2.1 cm)
TROUBLESHOOTING
My keyboard is not working.
- Move your keyboard closer to your computer.
- Make sure that your computer meets the system requirements.
- Replace the keyboard batteries.
- Try plugging your USB nano receiver into a different USB port on your computer.
- Re-plug the USB nano receiver into the USB port on your computer, then press the Esc, 1, and = keys simultaneously on the keyboard to pair the keyboard with the USB nano receiver. After pairing successfully, the LED turns off.
- Check the batteries in your keyboard. The low battery/pairing indicator LED blinks for 10 seconds when the batteries are low.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled
environment.
ONE-YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
INSIGNIA NS-PNK6811/ NS-PNK6811-C Wireless Keyboard with Touch Pad Quick Setup Guide – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>