INSIGNIA NS-CFL100A 350 Lumen LED Flashlight Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
QUICK SETUP GUIDE
350 Lumen LED Flashlight
NS-CFL100A
PACKAGE CONTENTS
- LED Flashlight
- Carrying case
- Carrying strap
- Insignia AAA batteries (3)
- Quick Setup Guide
FEATURES
- 350 lumen output makes your flashlight ideal for general indoor and outdoor use.
- Premium metal construction provides durability and dependability.
- IPX4 rating provides protection in dusty and damp environments (not waterproof).
- Three brightness levels plus a strobe (flashing) mode provide a wide range of lighting options.
- Carrying case and strap makes it easy to carry and keep track of your flashlight.
INSTALLING THE BATTERIES
- Turn the end cap on the bottom of your flashlight counterclockwise to open the battery compartment, then remove the battery holder.
- Insert three AAA batteries (included) into the battery holder. Make sure that you insert the batteries so that the + and – match the graphic to the right.
- Insert the battery holder into the flashlight body with the spring-loaded point facing the front of the flashlight. Replace the end cap, then turn the cap clockwise to tighten.
Notes:
- Do not mix batteries of different types because the batteries might leak.
- Do not mix old and new batteries.
- Remove batteries when the charge is depleted.
- If your flashlight is not going to be used for an extended period of time, remove the batteries.
Tip: Using non-rechargeable lithium or premium rechargeable batteries extend the run time of your flashlight.
USING YOUR FLASHLIGHT
-
1 Press the On/Off button.
-
Quickly press and release the Mode ( ) button one or more times to select a brightness level (high, medium, or low), or press and hold the button for about 1.5 seconds to select strobe mode.
Note: To exit strobe mode, press and hold the Mode ( ) button again. Your flashlight returns to the last brightness level you selected. -
To turn off your flashlight, press the On/Off button.
TROUBLESHOOTING
My flashlight does not turn on or I cannot select a brightness level.
- Make sure that you installed the batteries correctly.
- Make sure that your flashlight is turned on.
- Replace the batteries.
The flashlight body is overheating.
If you set the brightness level to high, the LED generates a moderate amount of heat. This is normal. If your flashlight is too hot to hold, turn it off and wait 10 minutes for it to cool.
SPECIFICATIONS
Dimensions (H x W): 5.5 x 1.3 in. (13.8 x 3.2 cm)
Weight (with batteries): 5.2 oz.
Battery: AAA size (3)
IP rating: IPX4 (rain and splash resistant)
Impact resistance: 3 ft. (1 m)
SAFETY INFORMATION
Battery cautions:
- Do not mix batteries of different types or mix old and new batteries because the batteries might leak.
- Remove batteries when the charge is depleted.
- If your flashlight is not going to be used for an extended period of time,remove the batteries.
- Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
- Make sure that batteries are disposed of correctly. Do not burn or incinerate.
Flashlight cautions:
- Do not shine the flashlight into a person’s eyes. This might damage the person’s eyesight.
- When your flashlight is on, do not touch the flashlight head. The head may be hot enough to burn your skin.
- Keep your flashlight away from children under 18 years of age.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA NS-CFL100A 350 Lumen LED Flashlight Quick Setup Guide – Download
[optimized]
INSIGNIA NS-CFL100A 350 Lumen LED Flashlight Quick Setup Guide –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>