Homedics WFL-200 Murra Zen Relaxation Fountain Instruction Manual and Warranty Information
- June 8, 2024
- Homedics
Table of Contents
ZEN WFL-200
You no longer have to journey for a
relaxing natural experience. A Mirra
soothing fountain from HoMedics lets you
connect to that same elemental calm by
bringing the sounds of the outdoors into
your personal setting.
REGISTER YOUR FOUNTAIN
Registering your fountain secures the benefits
of your warranty (even if you lose your receipt).
It also makes it easier for us to assist you if you
ever have an issue with your product.
www.homedics.com/product-registration
PARTS AND PIECES
A – Lid
B – Slate pieces
C – Fountain top
D – Fountain bottom
E – Rocks
F – Pump
G – Adapter
UNIQUE FEATURES AND SPECIFICATIONS
Natural water sounds
Soothing sounds create a relaxing ambience.
Unique lighting
Warm glow enhances any environment.
Convenient tabletop size
8.25″x8.25″x5.75″ for an easy fit on most surfaces.
Adapter voltage
120 VAC, 60Hz.
www.homedics.com
US: 1-800-466-3342
HOW TO USE
INSTRUCTIONS
1. Familiarize yourself with the pump. The switch located
on the front of the pump controls the pump speed.
The speed is indicated by a plus (+) and minus (-)
sign. To increase the speed, move the switch slowly
to the left in the direction of the plus sign. At its
highest speed level, the switch will cease to move
any farther. To decrease the pump speed for less
water flow, move the switch to the right toward the
minus sign. At its lowest speed, the switch will cease
to move any farther.
2. Clip the LED light into the plastic ring located inside
the fountain top.
3. Insert the tube into the pump.
4. Fill base with water up to the fill line. Keep the
water filled to the suggested level at all times for
optimum performance.
5. Set the fountain top onto the base.
6. Starting with the largest piece, place slate pieces
onto the fountain top.
7. Attach the AC adapter jack to the power cord. DO NOT
plug into an outlet at this time.
8. Rinse the rocks with water. Arrange the rocks on
the platform.
9. Set the fountain on a level, waterproof surface.
10. Plug the cord into a 120V household outlet. The switch
located on the power cord controls the fountain. If
pump doesn’t operate, click the power button once
to turn on and once more to turn off. NOTE: Ensure
that the electrical cord loops below the electrical
outlet to form a “drip loop.” This will prevent water
from running down the cord into the electrical outlet.
11. For the best results, operate with the pump
completely submerged. Keep the water level at
the fill line at all times.
TO CLEAN
1. To clean the pump: Unplug from electrical outlet. Use
a small brush or stream of water to remove any debris.
2. To keep water clean: Periodically change water
and clean the product according to the water
condition. Over time, fountain water and the
fountain itself become dirty. We suggest cleaning
and exchanging water weekly to increase
longevity of the fountain.
3. To clean off hard water deposits on the base: Soak
the container in a mixture of vinegar and water to
clean and remove any mineral buildup.
4. Keep water at an optimum level: Add water
periodically to keep it at an optimum level to avoid
shortening the life of the pump. Never let the pump
run dry.
5. Fountain storage: Unplug the fountain from the
electrical outlet, empty the water, dry the fountain,
and store rocks and fountain in a cool, dry place.
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING:
READ ALL INSTRUCTIONS BEFORE USING.
• Always place fountain on a firm, flat surface. Due to
the imperfect edges that are inherent to our natural
stone fountains, water may splash outside the base
of the unit. Therefore, we strongly recommend that
you place your fountain and fountain parts on a
waterproof surface or that you cover the surface
with a waterproof barrier.
• DO NOT place on any surface that can be damaged
by water.
• DO NOT reach for a unit that has fallen into water.
Unplug it immediately.
• DO NOT place or drop into water or other liquids.
• DO NOT use water above 86°F.
• Use this unit only for its intended purpose as described in
this document, the Quick–Start Guide and User Guide.
• DO NOT use attachments not recommended by
MIRRA or HoMedics; specifically any attachments
not provided with this unit.
• NEVER drop or insert any object into any opening.
• DO NOT place the fountain near heat sources, such
as a stove.
• Always keep the cord away from high temperature
and fire.
• To disconnect, turn all controls to the off position,
then remove the plug from the outlet.
• DO NOT use outdoors. For indoor use only.
• Never cover the unit while it is operating.
• Perform regular maintenance on the fountain.
• Never use detergent to clean the fountain.
• Never clean the fountain by scraping with a hard object.
• DO NOT attempt to adjust or repair the unit. Servicing
must be performed by professional, qualified personnel.
• Stop using this unit if there is an unusual noise or smell.
• Unplug this unit when not in use for a long period of time.
• DO NOT clean, adjust, or move the fountain, or
place hands into the water of the fountain without
first unplugging it from the electrical outlet.
• Keep this unit out of reach of children.
• Never let the pump run dry, as this will shorten the life
of the pump.
• Operate pump completely submerged for
proper cooling.
• To ensure quiet operation of pump, you must rinse
off all surfaces of your fountain, including the rocks
(if provided with your model) before using the first
time. Any dirt or residue that remains on the fountain
surface may obstruct the water flow through your
pump, thereby causing unnecessary noise.
• DO NOT carry this appliance by the power cord or
use the cord as a handle.
• Operate with tap or distilled water.
• The pump must be completely submerged in water.
If the pump is making noises, most likely it is not
completely submerged in water.
• The electric cord of this product cannot be replaced.
If it sustains damages, you must stop using the
product immediately and contact MIRRA Consumer
Relations (see Warranty section for Consumer
Relations contact information).
CONTACT US
Questions or concerns? We’re here to help. Contact a
Consumer Relations representative by phone or email
to help answer any questions. Please be sure to have
the model number of your product available.
1-YEAR LIMITED WARRANTY
For detailed warranty instructions, visit: www.homedics.
com To obtain warranty service on your Mirra product,
contact a Consumer Relations representative by the
telephone number or email address for your country
of residence. Please make sure to have the model
number of the product available.
For service in the USA
email: cservice@homedics.com
phone: 1-800-466-3342
8:30am–7:00pm EST Monday to Friday
For service in Canada
email: cservice@homedicsgroup.ca
phone: 1-888-225-7378
8:30am–5:00pm EST Monday to Friday
To register your product, visit us online.
IB-WFL200 | ©2018 HoMedics, LLC.
All rights reserved. | Tous droits réservés. | Todo derechos reservados.
Mirra is a trademark of HoMedics, LLC. | HoMedics is a registered trademark of
HoMedics, LLC.
Homedics WFL-200 Murra Zen Relaxation Fountain Instruction Manual and Warranty
Information – Download [optimized]
Homedics WFL-200 Murra Zen Relaxation Fountain Instruction Manual and Warranty
Information – Download