Eachine Nano C2 VTX User Manual
- June 8, 2024
- Eachine
Table of Contents
Eachine NANO V2 VTX
5.8G ISM band simulation VTX
Product Instruction Manual
Eachine NANO V2 VTX
Eachine NANO V2 VTX is simulated 5.8G ISM band transmission with stable output power, Support microphone, long transmission distance and strong power filter.It can ensure that the image has no snowflake, no stripes under the maximum throttle situation. Meanwhile, Eachine NANO VTX has remote frequency point control of remote control OSD interface, does not interfere with fellows when powered on, and support 8 peoples above flying at the same time super function.
Specification and Purameters
- Item Name: Eachine NANO V2 VTX
- Output Power: PIT/25mW/100mW/200mW/400mW Switchable
- Control Mode: BFOSD Control(RX)/Button
- BAT: 5V
- Video System: NTSC/PAL
- Antenna: IPEX
- Size: 14MM15MM4MM
- Weight: 1.4g
Please do not remove heat sink!
Precautions for use
- Make sure output terminal is installed antenna before it is powered.
- Input voltage must be within the specified range 5V
- Please choose antenna with good VSWR and DB if you replace, to get far transmission distance.
- Pay attention to static electricity protection during transportation and installation.
Frequency and power control methods
- Button frequency control: Short press once to change channel number CH (CH1-CH8) long press for 2 seconds and then short press to change bands.
- Button power control: Long press button for 6 seconds and then short press button to select power PIT/25mw/100mw/200mw/ 400mw.
Eachine Nano C2 VTX User Manual – Download [optimized]
Eachine Nano C2 VTX User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>