Bissell 3624, 2458 Series Spot Clean Pro User Guide

Bissell 3624, 2458 Series Spot Clean Pro

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR PORTABLE DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances

Thanks for buying a BISSELL portable carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your portable carpet cleaner works as well in two years as it does today, so this guide has tips on using , maintaining, and if there is a problem, troubleshooting

In just a few simple assembly steps, you’ll be ready to spot clean.

Product View

WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.

WARNING
Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures.

Cleaning Formula

WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine.

Keep plenty of genuine BISSELL for portable spot cleaning machines on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL cleaning formulas.

BOOST
CARPET CLEANING FORMULA ENHANCER

|

PRETREAT
PRE-TREAT SPOTS AND STAINS TO IMPROVE
CARPET CLEANING PERFORMANCE

---|---
| | | | |

Oxy Boost

|

Pro Boost

|

Prevent Boost

|

Pet Oxy Boost

|

Oxy Stain Destroyer

|

Pet Stain PreTreat

Removes old, set-in stains permanently

|

Revives carpets to look their best

|

Repels stains from soaking into carpet fibres

|

Removes pet stains and odors permanently

|

Permanent Stain Removal in 30 seconds

|

Pretreat to help remove tough pet stains and odors

PROFESSIONAL FORMULAS

|

*2X CLEANING FORMULA**

---|---
| | | | |

Professional Deep Cleaning

|

Professional Pet Urine Eliminator+Oxy

|

Pet Stain & Odor

|

DeepClean & Protect

|

DeepClean + Refresh

|

Deep Clean + Oxy

Out cleans all other formulas Includes Scotchgard™ Protector

|

Our best formula for pet urine stains & odors Includes Scotchgard™ Protecto

|

Removes tough pet stains Includes Scotchgard™ Protector

|

Deep cleans carpets and protects from future stains with Scotchgard™ Protector

|

Powerful cleaning with a refreshing scent

|

Removes deep down dirt, pet stains, & pet odor

ONLY BISSELL Protects from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®.
*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non concentrated formula.

Assembly

NOTICE: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may aggravate this condition.

Before you clean

1. Remove loose dirt and impediments before deep cleaning.
2. Pretreating (optional):
   2a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.
   2b. BISSELL Stain Pretreat
   Spray any BISSELL Stain Pretreat formula onto heavy traffic areas, soiled areas or stains. Allow to penetrate for at least 3 minutes. Clean as normal, following the instructions below

Preparing the machine

1. Release flex hose by twisting the hose secure latch clockwise. Unwrap flex hose completely.
2. Attach the Large Stain Tool or Tough Stain Tool to the hose grip until it snaps together. Make certain the tool is securely attached.
3. Twist the Quick Release™ cord wrap clockwise to unwrap the power cord completely and plug into grounded outlet.

Filling the formula & water tank

Tip: Make only one trip to the sink by bringing the entire portable cleaner. Fill and empty in the same trip.

1. Remove tank from the back of the machine by lifting up tank carry handle.
   Note: This tank was designed with a flat bottom so it can be easily filled.

2. Unscrew the black cap and remove bottle insert.
   

3. Fill tank with hot tap water (140° F/60° C MAX) to the water
   fill line. Add 60 mL/2 oz of BISSELL 2X formula to the tank.

4. Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the machine.

Operations

WARNING
Keep spray away from face. Failure to do so may result in personal injury.

IMPORTANT
Check the manufacturer’s tag before cleaning upholstery. Test a small, hidden area for colourfastness. If colour is affected, do not use. If manufacturer’s tag is missing or not coded, check with your furniture dealer.

Cleaning with your spot cleaner

1. Plug unit in and turn on by pressing power button.
2. Hold cleaning tool approximately 2.5cm above soiled surface. Press spray trigger to apply cleaning solution to soiled area.
3. Using the brush on the cleaning tool, gently scrub area to be cleaned.
4. For thorough cleaning, spray additional solution while brush and suction are in contact with surface.
5. Apply downward pressure on cleaning tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt can be removed.
6. As a final step, use “drying strokes” (by not pressing the spray trigger) to remove as much liquid/moisture as possible. Repeat this step as often as necessary.

Cleaning with 3″/4″/6″ tool

1. Attach the 3”/4”/6” Tough Stain Tool to the handheld cleaning hose.
2. Press the spray trigger to mist solution over and onto the soiled area.
3. Release spray trigger and gently scrub the stain.
4. To lift the stain away, apply downward pressure on the tool and slowly pull it toward you. Then use “drying strokes” (by not pressing down trigger) to remove remaining moisture. Repeat as needed.

**Cleaning with stain trapper tool***

*select models only

1.  Attach the Stain Trapper tool to the end of the hose.
2. Slowly move the tool back and forth over the stain. Be careful not to move the tool back and forth too quickly or soiled water will flow back into the hose.
3. To empty the tool, rotate the small tank on the bottom of the tool to unlock it.
4. Dump dirty water into a sink or toilet and rinse the tank out with clean water.
5. Replace the tank by lining up the locking teeth with their mating slots (make sure the two teeth that are closest together are pointed toward the brush). Turn the tank to lock it into place.

Maintenance & Care

WARNING
To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Empty dirty tank

1. When the dirty tank reaches the “FULL” line on the tank it is time to empty.

2. Remove dirty tank and carry to a utility sink, toilet or outside (where you will dispose of the dirty water).

3. To unlock the dirty tank lid, rotate handle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris.

4. Replace top of tank, and rotate the handle forward to lock in place on front of tank.
   

5. Before replacing tank on machine, wipe debris from red filter.
   

Cleaning machine

1. Remove and rinse the tools under clean, running water. Allow tools to dry.
2. It is recommended that you suction clean water from a bowl to rinse out the hose. Then lift end of hose and stretch out to ensure all water is cleared from hose.
3. Wrap the flex hose around the hose wrap and secure with latch.

Machine care (check regularly)

Tip For best results empty, rinse and dry tanks and tools before storing.

Cleaning Debris Filter

1. Remove all hair and debris from the red filter.
2. Place the Dirty Water Tank back onto the machine.

Machine storage

Store machine in a protected dry area.

NOTICE
To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

tank
Formula and water tank may not be seated completely| Turn power OFF; Remove and reseat tank
Pump may have lost prime| Hold end of hose below water level in tank to prime
Loss of suction power| Tanks may not be seated properly| Pick up both tanks and reseat them so they fit snuggly on the unit
Dirty tank has picked up maximum amount of dirty water and has reached full line| Empty dirty tank
Formula and water tank is empty| Check fluid levels in formula and water tank

Warranty

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by e-mail or telephone as described below.

Limited Two-Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part. See information below on “If your BISSELL product should require service”.
This warranty applies to product used for personal, and not commercial or rental service.
This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.
Bissell is not liable for incidental or consequential damages of any nature associated with the use of this product. Bissell’s liability will not exceed the purchase price of the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
*Exceptions and exclusions from the terms of the limited warranty
This warranty is exclusive and in lieu of any other warranties either oral or written. Any implied warranties which may arise by operation of law, including the implied warranties of merchantability and fitness for a particular purpose, are limited to the two year duration from the date of purchase as described above.

Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you.

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.

Service

If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Website:
www.bissell.ca

E-mail:
www.Bissel.ca/email-us

Call:
BISSELL Canada Consumer Care
1-800-237-7691
Monday- Friday 8am -10pm ET
Saturday 9am – 8pm ET
Sunday 10am – 7pm ET

Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.

Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-263-2535.

Register your product today!

Registering is quick, easy and offers you benefits over the lifetime of your product.

You’ll receive:

BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.

Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.

Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Product Support Reminders and Alerts
and Alerts We’ll contact you with any important product maintenance reminders and alerts.

Visit www.bissell.ca/registration!
Visit the BISSELL website: www.bissell.ca
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number:
Please record your Purchase Date:
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.

For cleaning tips and more visit www.BISSELL.ca or fi nd us at:
     

We can’t wait to hear from you !
Rate this product and let us (and millions of your closest friends) know what you think!
www.bissell.ca

Bissell 3624, 2458 Series Spot Clean Pro User Guide – Download [optimized]
Bissell 3624, 2458 Series Spot Clean Pro User Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>