Beoplay H9 User Guide

June 8, 2024
Beoplay

Beoplay H9 User Guide

Configuring your H9

Configuring your H9

Use the BEOPLAY app for setup and music enhancing features.

Bluetooth® pairing

Bluetooth® pairing

Move switch to the top position and hold for 2 sec. to initiate Bluetooth pairing. Release the switch when a sound is heard and the indicator starts flashing blue. Select Beoplay H9 in the Bluetooth settings on your device.

Bluetooth® pairing Figure 2

Using Bluetooth

Using Bluetooth

A Move the switch to the top position, hold it there for a moment and release to activate Bluetooth. B Move the switch to the top position and release again to deactivate Bluetooth.

Using Bluetooth Figure 2

Music operation – wireless

Music operation - wireless Figure A & B

A Tap to play or pause. B Circle clockwise or counter-clockwise for volume adjustment. C Swipe forward or backward for next or previous.

Music operation - wireless Figure C

Call operation – wireless

Call operation - wireless Figure A

A Tap to answer call. Long press to end call. Double tap to redial latest number. B Circle clockwise or counter-clockwise for volume adjustment.

Call operation - wireless Figure B

Call operation - wireless Figure C

When a call is active, swipe forward to transfer it from the headphones to the smartphone.

Active Noise Cancellation (ANC) operation – wireless and cabled

Active Noise Cancellation Figure A

Use the touch interface to control ANC in wireless or cabled mode:

A Swipe from top to bottom to deactivate ANC

B Swipe from bottom to top to activate ANC.

Active Noise Cancellation Figure B

Use with cable

Use with cable Figure A

Plug in the enclosed mini-jack cable to use the headphones if you are not allowed to use Bluetooth or if the battery is discharged.

Active Noise Cancellation (ANC) operation – cabled

Active Noise Cancellation Cable Figure A

A When the cable is plugged in, move the switch to the bottom position to deactivate ANC.

B Move the switch to middle position to activate ANC.

Active Noise Cancellation Cable Figure B

Battery and charging

Battery and charging

When the indicator turns red, the battery power is below 10%. Charge the headphones using the USB cable or exchange the battery. You can use the headphones while they are charging. When the battery is fully charged, the indicator turns constant green.

Exchange battery

Exchange battery

Push the slider to open the battery compartment. Remove the battery by turning the headphones upside down, no need to apply any force. Insert the new battery with charging points pointing inwards and to the right. Close the battery lid and lock it using the slider.

REGISTER ONLINE

Register online at www.beoplay.com/register to receive important information about product and software updates – and to get exciting news and offers from B&O PLAY. If you have purchased your product at a BANG & OLUFSEN store or at www.beoplay.com, you have automatically been registered

Beoplay H9 User Guide – Download [optimized]
Beoplay H9 User Guide – Download

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals