BLACK DECKER F67E Series Classic Iron Instruction Manual
- May 15, 2024
- Black Decker
Table of Contents
BLACK DECKER F67E Series Classic Iron
Please do not throw this product away with normal household waste. If possible, take it to an official collection point in your area that recycles this type of product. Thank you for considering the environment. BLACK+DECKER® and the BLACK+DECKER® logos are trademarks of The Black & Decker Corporation, used under license by Empower Brands, LLC, a subsidiary of Spectrum Brands, Inc. for its manufacturing and sale of this product. All rights reserved. All other marks are trademarks of Empower Brands, LLC. 2023 Empower Brands, LLC. All rights reserved /Todos los derechos reservados. Empower Brands, LLC, Middleton, WI 53562 08/2023 Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
- When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions before using.
- Use iron only for its intended use.
- To protect against the risk of electric shock, do not immerse the iron in water or other liquid.
- The iron should always be turned off [0] (refer to the HOW TO USE section) before plugging into or unplugging from an outlet. Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
- Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting it away.
- Loop cord loosely around iron when storing.
- Always disconnect the iron from the electrical outlet when filling with or emptying water and when not in use.
- Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. To
- avoid the risk of electric shock, do not disassemble the iron, and take it to a qualified serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
- Close supervision is necessary for any appliance being used by or near children. Do not leave the iron unattended while connected or on an ironing board.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down or use the surge of steam—there may be hot water in the water tank. Avoid rapid movement of iron to minimize hot water spillage.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed – is stable.
- The iron is not to be used if it has been dropped if there are visible signs of damage or – if it is leaking.
SPECIAL INSTRUCTIONS
- To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
- If an extension cord is necessary, a cord with an ampere rating equal to or greater than the max rating of the iron shall be used.
- A cord rated for less amperage can result in a risk of fire or electric shock due to overheating.
- Care should be taken to arrange the cord so that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer by authorized only cover. There are
no user-serviceable parts inside. Repair should be done by service personnel.
ELECTRICAL CORD
A short power-supply cord (or detachable power-supply cord) is to be provided
to reduce the risk of a) resulting from becoming entangled in or tripping over
a longer cord. Longer detachable power-supply cords or extension cords are
available and may be used if care is b) exercised in their use. If a long
detachable power-supply cord or extension cord is used, c) The marked
electrical rating of the detachable power-supply cord or extension cord should
be 1) at least as great as the electrical rating of the appliance, If the
appliance is of the grounded type, the extension cord should be a grounding-
type 3-wire 2) cord, and
The longer cord should be arranged so that it will not drape over the countertop or tabletop 3) where it can be pulled on by children or tripped over. If the power supply cord is damaged, it should be replaced by qualified personnel; in Latin Note: America, by an authorized service centre. The product may vary slightly from what is illustrated.
- Water-fill opening
- Temperature selector
- Steam button
- Pivoting cord
- Power indicator light.
- Heel rest
- Fabric Guide
- Water tank
- Button groove
- Soleplate
How to Use
This product is for household use only.
GETTING STARTED
Remove the plastic band around the power plug and all labels, tags and
stickers attached to the body, cord, or soleplate of the iron. Use ordinary
tap water for ironing. Do not use water processed through a home softening.
Important: For optimum performance, let the iron stand for 90 seconds
before beginning to iron. If unsure of a garment’s fibre, test a small area
(on an inside seam or hem) before ironing.
FILLING WATER TANK
With the iron unplugged and the steam button locked in the DOWN position, use
a clean measuring
- cup and pour water into the water-fill opening. Refill as needed.
- Plug in the iron and let it stand on its heel rest.
- The power indicator light will turn on.
SELECTING TEMPERATURE
- Use the fabric guide on the iron to select the proper temperature setting for the fabric. If unsure of a garment’s fibre, test a small area (on an inside seam or hem) before ironing.
- If there is a brown buildup on the soleplate, lower the setting and/or reduce starch.
- Once you determine the fabric type, set the temperature selector to the appropriate setting.
- Once the iron reaches the selected temperature, the power indicator light will turn off. The light will cycle on and off during ironing.
- When finished ironing, place the iron on its heel rest, turn the temperature selector to OFF and unplug the 3. iron.
3-WAY AUTOMATIC SHUTOFF
- The automatic shutoff feature in your iron works as follows:
- Once the iron reaches the appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes.
- As soon as you pick up the iron, it will start heating again. Wait for the iron to reheat completely before resuming operation.
STEAM IRONING
- Be sure there is water in the water tank.
- Turn the temperature selector between settings 5 and 7.
- If the steam does not start, gently bump the soleplate on UP Unlock the steam button.
- If water drips from vents, turn the selector to a higher setting.
DRY IRONING
- Turn the temperature selector to the desired setting and lock the steam button in the DOWN.
- For extended periods of dry ironing, empty the water from the iron.
- If you want to empty the water, hold the iron over a sink with the tip pointing down.
- Stay clear of splashing hot water.
When using your iron for the first time, you may notice water residue inside
the unit. This is normal. customer Care Line: USA
1-800-231-9786 Accessories/Parts (USA)
1-800-738-0245
For online customer service and to register your product, go to
www.prodprotect.com/blackanddecker
Servicio para el cliente
México 01-800 714-2503
Accesorios/Partes (EE.UU)
1-800-738-0245
visite
www.prodprotect.com/blackanddecker