Deepklean WS-8002 Sonic Electric Toothbrush Instruction Manual

Deepklean WS-8002 Sonic Electric Toothbrush

PRODUCT INFORMATION

To properly master the use of sonic electric toothbrushes. Please read the instructions carefully.

Specifications

• Name : Sonic electric toothbrush
• Model : WS-8001
• Package Dimensions: 21013039mm
• Input Voltage : 5V
• Output Voltage : 3.7V
• Rated Power : 1.5W
• Rated charging time : about 4 hours

Precautions

• Due to the high-frequency vibration of the bristles for the first time, there will be itching or numbness in unspecified people and a salty feeling in the mouth. This is a normal phenomenon and will disappear after repeated use.
• After use, please do not put it in a damp place, it should be placed in a dry and ventilated place.

Functions

Cautions

• Regularly check the body, charging base, and power cord for damage
• Please consult your dentist during oral treatment
• Keep out of children’s reach.
• Do not let children under 8 years old use it.

Indicator light

• Clean Mode: 36,000 Vibrations/ Min, The first indicator lights up.
• Clean+ Mode: 41,000 vibration/ Min, The first indicator flashes.
  • Remove Iha plaque and stains eeffectivelythrough high-frequency sonic vibration.
• White Mode: 33,600 vibration/ Min, The second indicator lights up.
• White+ Mode: Frequency l>between 33,600 and 36,000, The second indicator flashes.
  • Remove the surface stains through the frequency conversion vibration and whitening your teeth.
• Soft Mode: Slow Frequency conversion between 33,600 and 36,000, the 111ird indicator lights up.
• Soft+ Mode: Fast Frequency conversion between 33,600 and 36,000, the third indicator flashes.
  • Gently care for our gums and teeth, friendly for the sensitive teeth or the fresh user.

INSTRUCTIONS

• First step,
  • Plug the charging cable into the bottom charging port (or put it on the wireless charger), and the status indicator will light up in turn to start charging, and the status indicator will always be on at the same time to fully charge, and the product can start to use.
• Second step:
  • Insert the brush head into the stainless steel shaft of the fuselage. There is a clear gap between the fuselage and the brush head, and it can be used normally.
• Third step,
  • Squeeze toothpaste onto the brush head in standby mode
• Fourth step:
  • Attach the brush head to the surface of the teeth.
• Fifth step:
  • Press the button to start the electric toothbrush.
  • 30-second reminder for four zones, automatic stop in two minutes
• Sixth step:
  • Short press the button to turn oit n, and short press again to switch the mode it is recommended that customers who use it for the first time choose gear with weaker vibration to reduce discomfort)
  • Press the power button to activate the toothbrush, and press the power button for about seconds to turn it off.
• Seventh step:
  • After use, please rinse the brush head with clean water.
• Eighth step:
  • After use, the three-mode indicators are always on to indicate that the power is sufficient, the two-mode indicators are always on to indicate that about 50% of the power is left, the one-mode indicator is always on to indicate that the battery is low and needs to be charged in time, and the three-mode indicators flash simultaneously to indicate the power is about to be exhausted. After the current round of work is completed, the protection battery will be locked. It needs to be recharged before the power-on function can be reactivated.

Special statement : All the contents of this information have been carefully checked. If there are any printing errors or misunderstandings in the contents, the company reserves the right to final interpretation

In addition ;
if the product has technical improvements, it will be compiled into the new manual without notice. The appearance and color of the product are subject to change, subject to the actual product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>