PROAIM P-THA-01 Trailer Hitch Adapter Tow Bar Instruction Manual
- June 3, 2024
- PROAIM
Table of Contents
P-THA-01 Trailer Hitch Adapter Tow Bar
Instruction Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Trailer Hitch Setup
- Remove the pipe clamp bolt attached to the trailer hitch with a 6mm Allen key.
- After removing the pipe clamp, you can change its place according to your requirement.
- Tighten it properly with a 6mm Allen key.
- Change the position of another pipe clampaccording to your requirement using the previous procedure.
- Align the pipe clamps according to your setup needs, as shown in the images.
YOUR PROAIM TRAILER HITCH ADAPTER/TOW BAR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty:
We offer one year warranty for our products from date of purchase. Within this
period of time, we will repair it without charge for labor or parts. Warranty
doesn’t cover transportation costs nor does it cover a product subjected to
misuse or accidental damage. Warranty repairs are subjected to inspection and
evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.