THRUSTMASTER TS.XW Racer Sparco P310 Competition Mod User Manual
- June 6, 2024
- THRUSTMASTER
Table of Contents
TS.XW Racer Sparco P310 Competition Mod
Manual firmware update procedure
(Windows 7 / 8 / 8.1 / 10)
1. Install the drivers
“PC – DRIVERS FORCE FEEDBACK:
https://support.thrustmaster.com/en/product/ts-xw-racer-en/
During this procedure:
-
DO NOT CONNECT the TS-XW RACER wheel to your PC before being prompted to do so.
-
The wheel must be connected directly to the computer’s USB port. We recommend
that you do not use a USB hub for this procedure. -
DO NOT CLICK in any Windows dialog boxes that may appear during the update.
2. Restart the computer.
3a. On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel > Control
Panel” menu, verify that your wheel appears under the name “TS-XW RACER
(USB)”.
3b) On Windows 8 / 8.1 / 1010 Beta
From the Start menu, start typing the words Control Panel. This will bring up
the Search
function, giving you access to the Game Controller Control Panel.
It is also available under Apps > Thrustmaster:
Your wheel should appear under the name “TS-XW RACER”.
- Your wheel’s firmware version is displayed in the upper right-hand corner of the Control Panel tabs. Firmware: 8 is currently the latest version.
- If the firmware version is earlier than 8:
a) On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel” menu, click on “Firmware Update”.
b) On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Firmware Update. This will bring
up the Search
function, giving you access to the Firmware application:
It is also available under Apps > Thrustmaster:
6) The TS-XW RACER device is listed in the “Device” section.
The version of the firmware currently found in the device is displayed.
– The “Firmware” section displays information regarding the version of the
firmware that will be applied to the device.
7. When you are ready to continue, click OK.
IMPORTANT: DO NOT UNPLUG your wheel from the USB port, and DO NOT
DISCONNECT the wheel’s power supply during the firmware update procedure!
The firm ware update procedure begins (the update progress is displayed
onscreen).
During the firmware update, the MODE LED on the wheel will be OFF: this is
perfectly
normal.
The update program will inform you whether the firmware has been successfully updated.
If the firm ware has been successfully updated, the wheel will automatically calibrate itself, and the MODE LED will return to its original state:
- Click OK to return to the update program’s main window, and then click on [ X ] exit the program.
If the firmware update procedure has failed or displays an error message,
please contact
Thrustmaster technical support, who will guide you through the entire process
to follow.
9) Once the firm ware has been successfully updated, verify that the wheel is
functioning
properly in the Control Panel
Congratulations! You are now ready to play!
Documents / Resources
|
THRUSTMASTER TS.XW Racer Sparco P310 Competition
Mod
[pdf] User Manual
TS.XW Racer, Sparco P310 Competition Mod
---|---