QAZQA 107580 Charlois P40 Black Smoke Instruction Manual
- June 15, 2024
- QAZQA
Table of Contents
QAZQA 107580 Charlois P40 Black Smoke
Product Information
Specifications:
- Model: Charlois P40 Black Smoke 107580
- Voltage: 220-240V~
- Frequency: 50Hz
- Max Wattage: 40W
- Socket Type: E-27
Manufacturer Details:
FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands –
www.qazqa.nl
FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom
Product Usage Instructions
Installation:
- Choose a suitable location for the light fixture.
- Ensure the power source matches the voltage requirements of the product.
- Securely mount the fixture using appropriate hardware.
Bulb Replacement:
- Switch off the power supply before replacing the bulb.
- Allow the bulb to cool down if it was previously in use.
- Carefully remove the old bulb and replace it with a new one ofthe same wattage.
Cleaning and Maintenance:
- Regularly dust the fixture with a soft, dry cloth to maintain its appearance.
- Avoid using harsh chemicals or abrasive materials that may damage the finish.
Frequently Asked Questions
- Q: Can I use a higher wattage bulb than specified?
- A: It is recommended to only use bulbs with a wattage equal to or lower than the specified maximum to prevent overheating and potential damage to the fixture.
- Q: How do I contact customer support for further assistance?
- A: For any inquiries or support, please contact FittinQ customer service at the provided addresses or visit their official website for more information.
Safety Precautions
Installation Instruction
Overall Size
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class Il: the fitting is doubled insulated and does not require earthing
- Protection Class Ill: the fitting is low voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by wall switch
- The reference light angle and light space of the luminaire
-
- Take note of the symbols when connecting wires:
Contact
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert,
- The Netherlands
- www.qazqa.nl
FittinQ LTD
- 55 Baker Street,
- London, WIU 7EU
- United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>