1st Gen Ring Alarm Kit User Guide

: June 16, 2024
: Ring

Table of Contents

1st Gen Ring Alarm Kit User
Product Information
Product Usage Instructions
What’s in your Ring Alarm Kit
Connect your Base Station.
Connect your devices and place them around your home.
Explore Ring Alarm.
Having trouble? Here are some answers…
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

1st Gen Ring Alarm Kit User

Product Information

Specifications

Ring Base Station
Ring Motion Detector
Ring Range Extender
Ring Keypad
Ring Contact Sensor

Product Usage Instructions

Section 1: Connect Base Station

Download the Ring app from the app store or visit ring.com/app.
Create a Ring account or log in if you already have one.
Tap “Set Up Device” to begin Base Station setup.
Follow the in-app instructions to create a Location, which enables Ring Alarm security features.
Have your Wi-Fi password ready and enter it when prompted.
Press the Pairing button on the Base Station until the blue ring starts spinning.
Use the Ring app to pair your Base Station to your Ring account.
Select Wi-Fi or Ethernet connection for your Base Station.
Section 2: Set up devices
In the Ring app, tap “Add Ring Alarm Devices”.
Connect each Alarm device one at a time, waiting for one device to connect before moving to the next.
- To connect the Range Extender, plug it into an outlet.
- To connect the Contact Sensor, pull the tab out of the back.
- To connect the Motion Detector, pull the tab out of the back.
- To connect the Keypad, plug it into an outlet using the included USB cable and wall adapter.
  Section 3: Start with Security
Move each device to the desired location in your home.
Follow the instructions in the app to ensure proper functionality of each device.
- For the Contact Sensor and Motion Detector, use adhesive or screws to attach the sensor’s bracket and place the sensor accordingly.
- For the Motion Detector, it can be mounted in a corner or flush on a wall.
- The Keypad can be placed on a table or mounted on the wall using the reversible bracket.

Section 4: Explore
Explore the various features and settings available in the Ring app to customize your Ring Alarm system according to your preferences.

Section 5: Troubleshooting
If you encounter any issues during setup or usage of your Ring Alarm system, refer to the troubleshooting section in the user manual or visit ring.com/support for assistance.

FAQ

Q: Do I need a permit for professional security monitoring?
A: Depending on your location, you may need to obtain a permit before using professional monitoring. Please check with your local law enforcement agency for more information.

What’s in your Ring Alarm Kit

Connect your Base Station.

Download the Ring app
The Ring app will walk you through setting up and managing your Ring Alarm system.
Search for “Ring” in one of the app stores below, or visit: ring.com/app.

Create your account
If you already have a Ring account, use it to log in to the Ring app.
If not, the Ring app will guide you through creating your account.

Add a Base Station
Once you’ve confirmed your account, tap Set Up Device to begin Base Station setup.
The in-app instructions will guide you.

Create your Location
The first step to add your Base Station is to create a Location, which will enable some Ring Alarm security features.

Pair your Base Station
Press the Pairing button until the blue ring begins spinning. Then, use the Ring app to pair your Base Station to your Ring account.

Ring LED patterns (pairing)

Select Wi-Fi or Ethernet
Once you’ve found your Base Station, connect it to the internet. You can connect to your Wi-Fi network or use an Ethernet cable.

Ring LED patterns (connecting to internet)

Sign up for professional security monitoring
With professional security monitoring from Ring Alarm, your home is always protected.

Monitoring permits
Depending on where you live, you may have to obtain a permit before you can use professional monitoring. We’ve emailed you details, but you can contact your local law enforcement agency to learn more.

Connect your devices and place them around your home.

(This is the fun part.)

Connect your devices
In the Ring app, tap Add Ring Alarm Devices. Then, begin connecting your Alarm devices. Wait until you see one device connect before moving to the next.

To connect the Range Extender, plug it into an outlet.
To connect the Contact Sensor, pull the tab out of the back.
To connect the Motion Detector, pull the tab out of the back.
To connect the Keypad, plug it into an outlet with the included USB cable and wall adapter.

Place your devices around your home
Move each of your devices where you’d like to use them, then follow the instructions in the app to make sure they work properly.

Use adhesive or screws to attach the sensor’s bracket, then place the sensor on its bracket.
The sensor can be mounted on a door or window.
The motion detector attaches the same way the contact sensor does.
It can be mounted in a corner or flush on a wall.
The keypad can be placed on a table or mounted on the wall using the reversible bracket.
Plug the range extender into an outlet. Not sure which outlet to plug it into? Check out page 19.

Place your devices around your home
Move each of your devices where you’d like to use them, then follow the instructions in the app to make sure they work properly.

Security that moves with you
Ring Alarm has three security modes to match whatever you’re doing.

Disarmed
No sensors are monitored. Move freely through the house.
Away
All sensors are monitored. Secure your whole house.
Home
Monitors perimeter sensors while leaving indoor sensors disarmed.

Explore Ring Alarm.

Having trouble? Here are some answers…

Is there anything I need to complete setup that isn’t in the box?
Nope! Everything you need to get started with Ring Alarm is included in your kit.
Do I need two accounts for my Ring camera and Ring Alarm?
No, you don’t need separate Ring accounts for your Ring Doorbells, Cameras, and Ring Alarm. Your current account will work for all of your Ring products.
If I have a Ring Protect Plus subscription, are all my Locations covered?
No. You will need a Ring Protect Plus Plan for each Location if you want advanced features such as professional security monitoring.
Do I need a monthly plan if I want professional security monitoring?
Yes. The Ring Protect Plus plan includes professional monitoring and cloud video storage. If you want monitoring, that’s the plan you should choose.
I see more than one Base Station.
Which one is mine?
When the Base Stations appear in the list, the last four digits of the Base Station’s MAC address will appear underneath their name. Find the one that matches yours.
I don’t see my Wi-Fi in the list.
If you don’t see your Wi-Fi network in the list, you can still connect to it. Tap Add Hidden Network, then enter your Network Name and password.
Can I change my Wi-Fi later?
Yes, you can change your Base Station’s Wi-Fi network at any time.
Where should I place my range extender?
Plug the range extender into an outlet between the Base Station and the farthest device. This allows your Base Station to talk to the device more easily.
Should I place my motion detector in a corner or a wall?
Place it where it will have the best view of the area you want to cover. The motion detector should have a clear, unobstructed view of the area. Many people prefer a corner, but don’t be afraid to place it on a wall.
How high off the ground should I place my motion detector?
The detector should be about 7’ above ground level. This keeps it out of the way of pets, kids, and accidental bumps.
I skipped Monitoring setup. Can I finish the setup later?
Yes, you can come back to the Monitoring setup later. To access Monitoring setup, open the menu, tap Location Settings, then tap Monitoring.
What does the Base Station’s cellular radio do?
The cellular radio allows your Base Station to send alarm signals to the monitoring center if the usual internet connection isn’t working. Hopefully you won’t need it, but it’s there if you do.
What happens if the power goes out?
Your Base Station comes with a battery backup that will last up to 24 hours depending on usage. When your Base Station is running on battery, only a limited set of features will be available, but your home will still be monitored.
Can I add more devices to my Ring Alarm?
Yes! You can find a list of all the devices we support by tapping Add (+) on the Device List. Follow the instructions to add a device.
Do I ever need to remove the Base Station’s battery?
No. The Base Station’s battery does not need to be removed at any time.
My Base Station isn’t working. Can I reset it and try again?
Yes. Use a pin to press the Reset button on the Base Station for twenty seconds. This will factory reset your Base Station.