imperii RR FIERRO Smart HRM Bracelet Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO Smart HRM Bracelet Instruction Manual
Working condition for mobile
IOS 7.1 & above
Android 4.4 & above
Quick Start Guide
-
Download Veryfit 2.0 app
The smart band need to pair with the smart phone through app. Beforedownloading, please refer to working condition for mobile.
Way to download 1: Searching the QR code, scan and download app.
Please use the QR code Scan tool to scan the following QR code and open the link and download app. In case there is any problem to open the link, please try to copy the link and open it by browser.
Way to download 2: Search in the phone market and download. Please search and download the “Veryfit 2.0” from App Store or Google play store.
For Android
For Apple -
Device Activate & Charge
Make sure power is working normally before initial use. In case device is under ]ow battery, connect the device to the charger. Device will automatically boot up (please clamp the charging clip to the back 3 point position of bracelet as below)
-
Pair the device
Please make sure the Bluetooth is ON and then open app “Veryfit 2.0” and go to bind. When searching and pairing device, please press on the key of device and activate the device (screen on). App will search the device automatically, choose the device name and connect the device to the app.
Select the device in the smart phone searching list -
Gesture control: time display or take picture
Keep the bracelet screen horizontal and turn over wrist, then it shows time; Make bracelet connecting with APP, you can turn over twist to take picture when the APP program stars.
Keep wrist horizontal, in case it shows time.
turn over wrist to show time
Start photo program in APP, turn over twist to take picture
turn over wrist to remote photo control
How to Use
Once the device connected to the app successfully, it will record and analyze your activities and sleep status automatically, please press the key on the device to switch into different display modes as following:
- Normal Mode
Time Mode
–> Heart rate Mode
–> Step Mode
–>Distance Mode
–>Calories Mode
–>Alarm Mode
–> Find phone Mode
Note: Al.arm Mode and Find phone Mode will only display on the device screen after switch turn ON in the APP!
- Under normal mode, long press the key 2S to enter into the history sports mode, (the latest sports data),then switch into different display modes as following when normal press on the key:
Heart Rate Data
–> Distance Data
–> Pedometer Data
–> Calories Data
- Sports Mode
Double click the key under history sports mode, the new activity will start(Clear the latest history data, once new activity started, double click on the key will be invalid), device switch into different display modes as following when normal press on the key:
Sport Heartrate mode
–>Step Pedometer Mode
–>Sport Distance Mode
–>Sport Calories Mode DD
–> Sport Time Mode
Note: Long press the key 2s to exit the Sports Mode
Functions Instruction
Activities Record:
Record daily activities, you could check daily activities including steps,
distance and calorie consumption in the app;
Sleep Monitoring:
Device could automatically recognize your status and monitoring the whole
sleep progress with analyzing the deep sleep and light sleep hours;
Remind Alerts:
Alarm alert, call alert, sedentary alert, etc. by silent vibration;
Anti-Lost:
When the smart phone is beyond the Bluetooth range (no more than Sm),the
device vibrates to remind.
Remote Camera Control:
Device key could control remote photograph shooting.
HRM:
Monitoring your heart rate effectively, and being reasonable to planning
the movement.
FAQ
Can’t find device when pairing device?
- Please make sure the smart phone Bluetooth is ON and smart phone OS Android 4.3 & above and iOS 7 .I & above.
- Please make sure the distance between phone and device is no more than 0.5m, device is among the normal Bluctooth communication distance range (withinlOm)
- Please make sure the device is not under low battery. If there is still problem after full charge, please contact us.
Can’t connect the device with app?
Some smart phone Bluetooth service will be abnormal when reboot. Please reboot
the Bluetooth or reboot smart phone for pairing device.
How to Restore Factory Defaults
Make sure the device is connected with app, go in the app, enter “MineSystem
Setting” and choose “Reboot Device”.
How to update the device
Make sure the device is connected with app, go in the app “Device-Device
update”, please wait some minutes before update done.
Basic Specifications
CPU: Nordic nRFS 1822
Sensor: kionix kx.022-1020
HR Sensor: Silicon labs Si1142
Host Weight: 25g
Battery type: Rechargeable Ll Battery
Battery Capacity: 60mAh
Data Sync: Blu.etooth 4.0
Working Temperature: -IOC–45 C
Waterproof: not for swimming or diving
Standby time: 15 days & above
This product is applied by professional Bluetooth RF signal and own-developed
algorithm, the accuracy can reach 95% and above.
imperii RR FIERRO Smart HRM Bracelet Instruction Manual – Download
[optimized]
imperii RR FIERRO Smart HRM Bracelet Instruction Manual –
Download
imperii RR FIERRO Smart HRM Bracelet Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>