imperii RR FIERRO SmartWatch Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartWatch Instruction Manual
Please refer to this manual before using the product.
1. Cautions
1.1 The information in this document is subject to change without
notice, every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendation in this document do not constitute a warranty of any kind,
express or implied. It is normal that some functions may vary In certain
version of software.
1.2. Please charge the watch for no less than 2 hours before using it.
1.3. When under water, please do not press the power button, and the
capacitance value of the touch screen will change, so it is normal that the
touch screen does not respond to your touch-based gesture.
1.4 With IP68 water & dust protection, your watch may be used for
shallow-water activities like swimming In a pool. However, lt should not be
used for diving, water skiing or other activities involving high-velocity
water or hot bath, submersion in tea or any other corrosive liquid.
Diving under more than 3 meters water or pressing the button when under water
may cause water coming into your watch, these are destructive use and you will
not be able to enjoy the warranty and free maintenance.
2. Get Started
Supported smartphone Operating System: Android OS 4.4.4 or later, 105 7.0 or
later (requires iPhone s or later).
2.1. Charging the watch
2.1.1. Connect the USB port on a 5V 1A power adapter, then plug it into a
power outlet.
2.1.2. Connect the 4-pin magnetic connector to the back of your watch,
ensuring that the -‘f’.-S:, It contacts on your watch and connector are
aligned, you’ll hear a chime (unless the watch is ‘muted) and see a charging
icon on the watch face.
2.1.3. When you watch is fully charged, a fully charged battery icon will
display on the watch screen. At this time, your watch will automatically
detect the charging status and stop charging. Please remove the charger once
the watch is fully charged.
Note: Fully charging your GY68 smart watch may take about 2 hours.
2.2. Power On/Off
2.2.1. Power On: Press and hold the power button until the screen
displays SMART WATCH.
2.2.2. Power Off: Press and hold the power button until the screen displays
“Power off ?”, then select Yes to power off your watch.
2.3. Set up and pair with phone
Before using your watch, please download and Install the Fun do Wear App to
your smartphone .
For an easy and safe installation, please scan the built-in QR code In the
watch with your smartphone, or open the Google Play™ or Apple App Store and
search for FUN DO WEAR.
Allow Fundo Wear to access contacts, call logs, messages, notifications and
location in your smartphone. Register/Login with your mailbox (or log in with
a third-party App) and keep the App running in the background.
2.3.1. Pairing with Android smartphone
a. Enable Bluetooth on your smartphone and watch, launch the Fundo Wear
App, and pair your phone with your watch according to the on screen
instructions.
Touch > Touch > Start Search
The phone automatically lists the devices found, find and touch your watch
name. The Bluetooth pairing request dialog box appears, touch Pair to start
the pairing. The Bluetooth Icon In your watch displays as green when paired
successfully.
b. Go to Settings> Bluetooth on your phone, there Is a connected device
on PAIRED DEVICES. Find your watch name on AVAILABLE DEVlCES and touch
to pair. When bl-directional pairing Is completed, two connected devices will
display on PAIRED DEVICES and the Bluetooth icon in your watch will
display as half green and half blue.
3. Main Functions
3.1.Phone
3,1.1. Marcador: When your watch is paired with your phone, make
Bluetooth calls from your watch.
3.1.2. Phonebook: When your watch Is paired with your phone,
contacts on your phone will be automatically synced to your watch.
3.1.3. Call history: When your watch is paired with your phone, call
history on your phone will be automatically synced to your watch.
3.1.4. Messaging: When your watch is paired with your Android
phone, messages on your phone will be automatically synced to your watch(Only
for Android OS smartphone).
3.1.5. Answering calls: When your watch is paired with your phone, on the
Incoming call screen, tap to answer the call and start talking through your
watch.
3.1.6. Rejecting calls: On the Incoming call screen in your watch,
tap to reject calls.
3.1.7. On Bluetooth calling:
- Touch to mute the phone call.
- Touch to hang up the phone call.
- Touch to open the dialpad.
- Swipe vertically to adjust the call volume.
During a call, you can change the device used to talk and listen. From the phone’s call screen, select your watch name to use your watch to talk and listen. To talk and listen using your phone, select phone or Speaker.
3.2.Health
The goal of the Health feature is to sit less, move more and get a healthy Life style.
3.2.1. Heart rate
On the Health menu, select Heart rate. Touch the heart icon to start measuring
your heart rate.
On the heart rate measuring screen,swipe down from the top to open Options.
You can set Mode, view History and Help here.
While measuring your heart rate, ensure that the watch is level and that the
heart rate sensor is in contact with your wrist You might need to press down
on the watch slightly to ensure a good contact. To achieve a reliable reading,
make sure that you keep your wrist level.
Note: Heart rate reading should not be used for med I cal purposes.
3.2.2. Pedometer
Power on and wear your watch, it will automatically record your steps and
calculate distance and calories burned. Your intraday fitness data will be
cleared at 00:00.
On the fitness data display screen, swipe up from the bottom to open Options,
you can set the Status, Goal, Gender, Height, Weight and view History here.
When your watch is paired with your phone, your fitness data will real-time
sync to the Fundo Wear app in your phone, or click Sync Data on Fundo Wear app
to sync fitness data from your watch to your phone.
• Reset your watch: Settings > Reset
3.2.3. Sleep Monitor
From 22:00PM to 08:00AM, sleep monitor will automatically run and monitor your
sleep quality and hours.
On the sleep data display screen, swipe up from the bottom to open Options.
You can set Status, view History and Help here.
3.2.3. Sleep Monitor (cont.)
When your watch is paired with your phone, click Sync Data on Fundo Wear app
to sync sleep data from your watch to your phone.
3.2.4 Sedentary
St a sedentary duration {at intervals of 3D minutes, O min-300 mins for
options), your watch will vibrate and ring to remind you when you have been
seated for a sedentary duration.
3.2.5. Drink
Turn on the drink feature, everyday from 09:00AM to 21 :00PM, your watch will
remind you to drink water every 1 hour until you drink a total of 2.5L water.
3.3. Remote
3.3.1. Remote Camera
When your watch is paired with your phone, open the camera of your phone, tap
Capture on your watch to remote control taking photo. Photo saved in your
phone.
To function as a camera remote, your watch needs to be within normal Bluetooth
range of your phone(about 33 feet or 10 meters).
3.3.2. BT Music
You can use your watch to control music playback if it is connected to your
phone. This includes changing songs and adjusting playback volume. Music only
plays on your phone.
3.3.3. Anti-lost
When your watch is paired with your phone, touch anti-lost on your watch, your
phone will get an alert.
3.4. Tool
3.4.1. Alarm
Turn on the alarm feature, set alarm time, repeat time, alarm tone and alert
type. On the last alarm display screen, swipe up from the bottom, tap+ to add
new alarm. In an alarm that you have set, firmly press to delete it.
3.4.2. Calculator
Enter data on the keypad to calculate.
3.4.3. Calendar
View the date, week. month and year.
3.4.4. Stopwatch
lime events with accuracy and ease.
3.5 Notifier
Pair your watch with you phone and get notifications from the apps of your
phone. Notifications are displayed on your watch as soon as they arrive, you
will not miss what you matter.
Note: On your phone, go to settings > Notifications to specify which apps
and events generate notifications.
3.6. Bluetooth
Search and pair your watch with other mobile devices.
3.7.App
Scan the QR code to install Fundo Wear App.
3.8. Settings
3.8.1. Bluetooth Settings
On unpaired status, tap BT settings to turn on/off Bluetooth and set
visibility. On paired status, release the connection first to turn off
Bluetooth.
3.8.2. Clock
Set the clock type, the clock type that you have selected will be displayed as
your watch face.
Turn on the Time sync, when your watch Is paired with your phone, time and
date will be real-time synced from your phone to your watch. Turn off the Time
sync:, you can manually set the time and time format.
3.8.3. Sound
Set alert type: Ring, Vibrate, Ring and Vibrate, Ring then Vibrate and Mute.
Select ringtone and select notification tone here.
3.8.4. Volume
Set the volume of Multimedia, Ring, Notification tone.
3.8.5. Display
Set the Main menu style, Brightness and Screen time out.
3.8.6. International
Turn off Auto Sync, you can select a language which different from your paired
phone. Turn on Auto Sync. the language of your watch will sync with your
phone(the premise is that your watch has the language of your phone).
3.8.7. Motion
- Turn on/off flip to mute Incoming call.
- Turn on/off flip to mute alarm.
- Turn on/off wake-up gesture.
- Turn on/off shake to answer the call.
3.8.8.Apps
When your watch ls paired with an Android smartphone, tap My Applications in
Fundo Wear App, you can install the Apps to your watch(only for Android
operating system).
Go to Settings> Apps in your watch, tap Uninstall all to uninstall all
applications.
3.8.9. Reset
Go to settings > Reset in your watch, your watch will erase all data and
restart.
3.8.1 O. About
View the Device address, LE address, Connected service, LE connected status,
Version and Release time here.
NOTES:
Solutions of the problem that the data of pedometer/sleeping/heart rate canoot
be synced to FundoWear:
- You phone can on~ install one FundoWear App.
- Register and log In your Fundo Wear first before using it
- Ensure that your watch and your phone have been bi-directional paired successfully.
- Sleep monitor and Pedometer cannot be working at the same time.
- lf the data still cannot be synced to the Fundo Wear, please restart your watch and your phone, and try the steps above again.
Common troubleshooting
In case there is a problem during the using of your watch, please solve it accordingly by the following ways. If the problem persists, please contact the local dealer or the designated service representative.
4.1. Cannot power the watch on
a. Please firmly press the p~r button for at least 3 seconds.
b. The battery power may be too low to power on, please recharge your
watch and start again.
4.2. Auto power off
The battery power is too low, please recharge your watch.
4.3. Short battery life
The battery is not full charged, please ensure an enough time to charge your
battery up (No less than 2 hours).
4.4. cannot be charged normally
a. Check whether the battery still can be used. The performance of
battery will degenerate after several years use.
b. Check whether the charger Is workable, you can replace a new charger
and try again.
c. Check whether the watch charge Interfaces and charge cable are
normally connected.
4.5. Do not display caller’s name
When your watch ls paired with your phone, please check whether the contacts
on your phone are synced to :,our watch, if not, release the connection.
please allow the contacts synchronization while you are pairing your watch and
phone again.
4.6. Bad call quality
a. Our watch may not In the normal Bluetooth range of your phone(about 31
feet or 10 meters), please keep a stable Bluetooth connection to ensure a good
c.all quality.
b. Your phone is in a weak signal, please make calls in areas with good
signal.
c. The microphone of your watch may be covered by your wrist, please
adjust your wrist posture when making phone call.
4.7. cannot sync the data to Fundo Wear
a. Check if you have log in your Fundo Wear, if do not, please log in
first before use,
b. Check If your watch and phone are directional paired successfully, if
so, the Bluetooth iron on your watch will display as half green and half blue.
imperii RR FIERRO SmartWatch Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartWatch Instruction Manual –
Download
imperii RR FIERRO SmartWatch Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>