imperii RR FIERRO SmartBand with Heart Rate Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartBand with Heart Rate Instruction Manual
Thank you for choosing our device. Please read the user guide carefully before using the bracelet.
Configuration
Use the VeryFitPro app on Android or iOS phones to set up the wristband as
follows:
Your device should meet the following requirements:
iOS 7 Android 4.4 and higher Bluetooth 4.0
1. Download VeryFitPro
-
Option 1:
Search and download “VeryFitPro” in the App Store or in the Android store. -
Option 2:
Scan the QR code and download “VeryFitPro2”.
Please copy the link and open it in the web browser if you can not open it with WeChat or any other scanning tool.
2. Activate the device
- Press the belt gently and pull out the center unit.
- Connect the central unit to the USB charger (5V / 500mA) and charge it before the first use.
3. Touch Screen
Swipe up/ down: change the mode oractivate the screen
One touch on the screen: check the data
Touch Key
Touch the touch key: go back to the main interface
4. Open the VeryFitPro APP to connect the device
Make sure Bluetooth is turned on and open the VeryFitPro application.
After selecting the correct bracelet on your phone, please slide the touch
screen of the bracelet to activate it and complete the connection.
Know your device1.
-
How to wear
Carry the device on your wrist horizontally, about 2cm from the carpal joint,just as if you were wearing a watch.
-
Heart Rate Monitoring
To record your heart rate more accurately, please wear the device on the top of your wrist andsomewhat tighter than when you exercise.
-
Automatic Heart Rate
Automatic heart rate monitoring is enabled by default, unless you manually turn it off.
-
Time of use
The battery lasts in use around 7 days. -
**Interfaces
Display protection interface
Main interface
Multi-sport mode
Guided breathing
Message alert
Weather
Music control
Function menu
**
Main Features
- Activity Log
Touch the screen
Hear rate
Steps
Calories
Distances
Exercise time
***Hear Rate Monitoring
Charging of the Heart Rate data
(changes in 0.5s)**
- **Multi-sport mode
Chose Multi-sport mode and touch the screen
**Press and hold the screen for 3s to enter Multi-sport mode
* “Continuous exercise” mode
Touch the screen to enter the “Continuous exercise” sub mode,
expert when music playback is active
Touch the touch key to pause
Press and hold the screen for l seconds to reactivate
* “On-going sport” Mode
-
Guided breathing
- Press the touch key to enter the guided breathing mode.
- Inhale for 5s (the bracelet vibrates slightly at first), hold for ls (the bracelet will vibrate softly again) and after exhaling, inhale again for 5s (again, the bracelet will vibrate). Repeat the process times, the display will keep on.
-
Message Alert
- Touch the screen to enter message check mode. Press and hold 10 delete the current notification.
Note: Only the last 5 messages can be viewed.
- Touch the screen to enter message check mode. Press and hold 10 delete the current notification.
-
Atmospheric Weather Mode
- Touch the screen to switch to the weather forecast. The display will vibrate when there is no weather information, and will not enter this mode.
Note: No weather information will be displayed on the bracelet when in the APP function this is set to OFF. This information will only be updated when you switch the function to ON once connected via Bluetooth. You will not see this information on the device when there are no updates in the next 24 hours in the APP.
Your phone needs internet connection to get the weather information.
- Touch the screen to switch to the weather forecast. The display will vibrate when there is no weather information, and will not enter this mode.
-
Music Control Mode
- Press Start / Pause to play the music, the bracelet will
vibrate slightly.
Note: This option will n01 be displayed on the screen if the music control is OFF in the APP. Activating It in the APP will be displayed on 1he device when you have a Blue tooth connection t,
Then it will work and you can enjoythe music.
When there isno connection, it will display a musical note icon with a cross.
- Press Start / Pause to play the music, the bracelet will
-
More functions and settings
-
Touch the screen 10 enter Function Setting Mode .
-
Click ( ) to enter DO NOT DISTURB settings.
If the “Function Setting Mode” is off you will not receive messages or call. The bracelet will vibrate with the anti-loss alert. -
Touch to enter Stopwatch Mode
-
Touch to enter Camera Mode, the bracelet will vibrate tightly.
-
Touch to switch to Clock Mode. Swipe up and down will switch
between s different styles of clock display, touch to confirm, the one you prefer. -
Touch to enter the screen activation by shaking.
-
Touch to change to alarm. You can configure up to 10 alarms
(synchronized with the App). -
Touch to switch to heart rate monitor.
-
Touch to enter the details of the time axis. Touch the screen to change.
The specific data categories are as follows:
Sleep Monitoring Mode:
Deep sleep, light sleep, wake up
Multi-sport mode 13 sports by default)
Walking, Running, film, Cycling, Hiking, Fitness, Basketball, Badminton -
Touch to enter the Bluetooth settings.
-
Touch to enter shutdown mode.
-
Touch to enter language,unit time,and date settings.
-
Basic Specifications
Model N: ID107Plus HR
Working voltage: 3.7V
Synchronization: Bluetooth 4.0
Waterproof: IP67
Battery Capacity: 65mAh
Weight of the central body: 30g approx
Working temperature: -10ºC-45ºc
Duration in use: around 7 days
FAQ
-
How to find the device when linking to the mobile?
- Ensure that Bluetooth is turned on, and that your Smartphone uses Android 4.4 / iOS 7.0 or higher systems.
- Make sure that the distance between the phone and the device is with in 0.5m, the device will operate within the normal Bluetooth communication range (10ml once they have been paired.
- Make sure the device is not under battery power. If the problem still persists, please contact us.
-
Bluetooth connection occasionally fails
- This may be Caused by a malfunction in the Bluetooth service when the phone is restarted.
- Restart your phone or Bluetooth service and it will work normally.
-
How to restore factory settings?
Make sure the device is connected to the phone, go to the App, enter “Device- Mo,e” and choose “Reboot Device”.
This device complies with Part 15 of the FCC Rules. Its use is subject to the following two conditions:- This device may cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
imperii RR FIERRO SmartBand with Heart Rate Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartBand with Heart Rate Instruction Manual –
Download
imperii RR FIERRO SmartBand with Heart Rate Instruction Manual – OCR PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>