imperii RR FIERRO SmartBand Oxygen Plus Instruction Manual

imperii RR FIERRO SmartBand Oxygen Plus

Specifications

Chip: Nordic 52832
Display: Color OLEO 0.96″
Battery: 150mAh
Waterproof rating: IP67
Stand by time: 5 days
Support system: IOS 8.0 or above, Android 4.3 or above
Heart rate monitor: Yes
Blood pressure test: Yes
Auto screen light: Yes
Bluetooth: 4.0

Basic Layout

Charging the device

Please charge the smart bracelet before use.
Charger Voltage: SV
Charge time: about 2 hours

Bracelet menu and functions

1. ON/OFF button
   Hold and long press the key to power on or power off
   

2. Time, date & week
   After the device has been connected via Bluetooth with your phone, the clock, date and week will auto synchronize according to your phone clock , date and week.
   

3. Sport Mode
   Hold and long press the touch key to enter sport mode, it will automatic enter running mode and change into dynamic heart rate, during the mode, short press the key to choose “pause” and “quit” menu, if you want to make a pause, then hold and long press the pause icon, and then you will find “continue” icon and back icon , if you need quit from the mode, hold and long press the quit icon.
   You will see sport time, dynamic heart rate, steps, calorie.
   The heart rate records will not save to APP.
   

4. Pedometer
   

5. Distance
   

6. Calories
   

7. Blood Pressure Monitor
   Press the touch key to get to the blood pressure page. The icon will flicker (please stay still while the blood pressure test runs) If you need to save the data, please use the APP to test and to save blood pressure data. Manual activation of this function on the device will not save the result to the APP. And you can open real time blood pressure from APP, then the device will automatic test and record BP by each 10 minutes, you can see the records from Dashboard of APP.

8. Heart Rate Monitor
   Cycle through to the heart rate page, the heart rate icon will flicker. It is advisable to wear the smart bracelet around the middle of your wrist, and please make sure the heart: rate sensor is close to your skin. Manual activation of this function on the device will not save the result to the APP. The APP there will show heart rate data collected automatically every 30 minutes if you open real-time heart rate from APP.

9. Sleeping Monitor
   Device will monitor sleeping data automatically, please check the sleeping detail data on APP Dashboard
   

Bluetooth paring

1. Turn on the smart bracelet.

2. Turn on Bluetooth on your smart phone.

3. Download the H Band APP in your smart phone by scanning the below QR code or search H band App from Google play store or Apple store
   

4. Tap Device in Settings inside the H Band APP, the device’s Bluetooth name will appear, select to pair with the APP.
   After Bluetooth paired there will be a Bluetooth icon that appears on the Date and time screen.
   

Bluetooth Remove

1. Disconnect the device in the APP
2. Turn on the App on the smart phone
3. Remove the Bluetooth name on the setting of the smart phone.

APP functions and instructions

After installing the H Band App, you may be required to fill in your personal information such as gender, weight, etc. Please then connect smart bracelet via Bluetooth (reference the Bluetooth Pairing steps)

Dashboard

You can check all data here from today, yesterday and a data summary.

1. Step: Tap to check Step, Distance, Calorie data.

2. Sleep: Tap to check sleeping data (sleep duration , deep sleep, light sleep, etc.)

3. Heart Rate:
   (1) Check your full day heart rate data and the average HR, which is recorded by the device automatically every 30 minutes if you open real-time HR from APP settings.
   (2) You can also test manually heart rate from APP by Tap” 0 n icon, when the results come out, then click to stop. This will not save on APP
   

4. Blood pressure:
   (1) Check your full day blood pressure data which is recorded by device automatically every 10 minutes if you open real time BP from APP settings.
   
   (2) Tap ” ” icon to start manually blood pressure function (please stay still while the blood pressure test runs) after finish test you can choose to save the data for reference.
   There are two Blood Pressure test modes: Normal and Personal.
   If you have hypertension or hypotension, please select Personal. Otherwise, please select Normal.
   

Running

1. GPS movement:
   Tap to start the movement, and allow the device to get your position, you can tap stop to finish the record. Each start and stop is a complete record of movement, records include the activity time, speed, pace, calories burned, and routes etc.

2. Bracelet movement:
   Click to start sport mode of the bracelet, you will find records on this dashboard.
   

Settings

My device: Tap to find the device name to get paired.
Click” paired device name” then you will find

(a) Message notification: select the notification for phone calls and messages.(Paring request appears on APP when
Bluetooth connected with the smart phone, please select “pair” to get message notifications pushed on the smart watch, select “no” for no message notification push.)
(b) Alarm: Set alarm clock.
(c) Sedentary setting: Set sedentary reminder
(d) Heart rate alarm: Set heart alarm limit level.
(e) Turn the wrist: Open to turn on wrist brightness.
(f) Pair devices: Turning on this function the data on the APP can be uploaded
(g) BP private mode: Set personal BP level for private testing reference.
(h) Switch setting:
(1) Wear detection: Turning on this function will allow the device to detect if it is worn on a wrist.
(2) HR automatic monitoring: Turn on to open real time HR.
(3) BP automatic monitoring: Turn on to open real time BP.
(4) Find cell phone
(5) Stopwatch function: Turn on and there will appear stopwatch menu on bracelet, hold and Long press touch key to enter and short press to start stopwatch, then short press to stop and long press to quit from this mode.

(i) Take photo: Remote mobile phone take pictures by tap bracelet key.
(j) Count down: Set count down time and choose to display on bracelet or not.
(k) Reset password: You can set a password for the device
( so other mobile phone cannot connect with your device)
The default password is 0000. If your forget the password, press and hold on the device sleep screen until the device vibrates, the password will be reset to the default 0000.
(l)Screen styles: Choose the main menu styles.

(m) Firmware upgrade: Upgrade firmware of the device
(n) Clear data: Factory reset of the bracelet.
Sport goal: Set the steps goal of each day.
Sleep goal: Sleep suggestion based on personal data.
Unit setting: Choose to set metric or imperial unit
Note: the device green light sensor Automatic turns on every 10 minutes (for detecting and collecting sleeping and heart rate data)

TECHNICAL SERVICE :http://imperiielectronics.com/index.php?controller=contact

imperii RR FIERRO SmartBand Oxygen Plus Instruction Manual – Download [optimized]
imperii RR FIERRO SmartBand Oxygen Plus Instruction Manual – Download
imperii RR FIERRO SmartBand Oxygen Plus Instruction Manual – OCR PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>