imperii RR FIERRO SmartBand Waterproof 3D Burn User Manual
- June 7, 2024
- imperii electronics
Table of Contents
TE.03.0256.01
Getting started
I. Operation mode
1. Click: Interface switchover
2. Long press: Ok/exit, switchover mode
3. See the schematic diagram below for effective touch area:
4. Power on: Press the touch area for more than 3 seconds to power it on.
5. Power off: Click the touch area to switch to the power-off interface; long
press to pop up “YES” and “NO”; select “YES”, and it will be powered off after
a long press. The Bluetooth name, version number and the last 4 digits of the
Bluetooth ID for the bracelet can be viewed on the power-off interface.
6. In case of low battery and only one red grid is left , vibration will
occur to indicate that the voltage is low and recharging shall be made
promptly so as to avoid the loss of sports data due to automatic shutdown
caused by low battery.
7. A USB charging plug can be found after unplugging the short watchband. A
standard 5V recharger can be inserted into the USB port for recharging.
8. The recharging duration is about 1.5 hours. It will go to the time
interface after the recharging is finished. If it is not used for a long time,
it shall be powered off and recharged once every month. In addition, the gold
finger at the USB plug end shall be cleaned regularly to reduce unsuccessful
recharging due to poor contact.
II. App download and connection
1. An App is required to connect the bracelet with a smartphone. You can
download relevant App by scanning one of the QR codes below.
https://play.google.com/store/apps/details?id=com.zjw.wearhealth
https://itunes.apple.com/app/id1265052549
http://a.app.qq.com/o/simple.jsp?pkgname=com.zjw.wearhealth
2. Android users can download the App by searching WearHealth through Google
play; IDS users may download the APP by searching WearHealth through App
Store. The minimum requirements for smartphone operating systems are Android
4.4 and IOS 8.2 and above.
3. Connection between bracelet and App:
Step 1: Open the Bluetooth on your smartphone;
Step 2: Download the “WearHealth” App; register your personal account as
instructed or use a third-party account to log in;
Step 3: Open the application interface of the “WearHealth” App; click
“connecting bracelet” on the “My options” interface to search Bluetooth
devices for the bracelet. Find and click the correct Bluetooth for connection;
the time interface of the bracelet will display a “Bluetooth icon” after a
successful connection; the bracelet will synchronize the time of your
smartphone as well as various sports data. If you are uncertain about the
Bluetooth name, you may switch to the power-off interface to view the
Bluetooth name and address (a Bluetooth icon will not be displayed on the
bracelet if it is not connected to your smartphone).
III. Unbinding App
1. Unbinding for Android phones: Click “Disconnect bracelet connection” on
the management interface of the “WearHealth” App.
2. Unbinding for IOS phones: After clicking “Disconnect bracelet connection”
on the management interface of the “WearHealth” App, go to system settings
->Bluetooth -> click the exclamation mark behind the device name -> ignore the
device to completely unbind relevant Bluetooth.
Functions
IV. Main display interfaces
Sports data Sleep duration Messages Find my phone Stopwatch On/Of
V. Illustrations on main functions
1. Dial plate: It displays the time. It can be changed by touching the touch
area for 2 seconds. Shortly press the touch area to select the relevant dial
plate, and press the touch area for 2 seconds to confirm after selecting the
dial plate.
2. Step counting: It can record the number of your steps within one day. The
steps will return to zero at 00:00 of each day to start the record of the new
day.
3. Calorie: It can record the calories consumed by you within one day.
4. Distance: It can display the distance accumulated within one day (Metric
units or British units can be set up in the App as per requirements).
5. Heart rate: Your heart rate can be tested 1 second after it is switched to
the heart rate interface. It will vibrate and display the test result.
6. Sport mode: Switch to the sport mode interface and enable sport mode after
long pressing the touch area, and you will exit from the function after making
a second long press. The sport mode only displays current sports information.
Relevant sports data will not be saved after exiting from the function after a
long press.
7. Sleep testing: It can display the total duration of your sleep last night.
The duration for sleep testing is from 22:00 of day Ito 08:00 of day 2.
Relevant sleeping data will be displayed after 08:00. Note: The sleeping data
tested during any period other than the above duration will not be recorded.
8. Messages: The latest three messages will be stored. Long press it to view
these messages and clear the record after viewing them.
9. Find my phone: Long press it to enter the “Find my phone” interface (It is
not allowed to set your phone as mute and your phone needs to stay connected
to the bracelet).
10. Stopwatch: Long press it to enter “Stopwatch”. Shortly press once to
start the function and shortly press it again to pause the function. Long
press it to exit from the function.
11. Remote photographing: Open the WearHealth App on your smartphone. Find
the shake camera function to shake your smartphone and control mobile phone
photographing. (The WearHealth App shall be authorized to have photographing
permission. Your smartphone shall be connected to the bracelet when the
function is used).
12. Care: Click tare” on the WearHealth App to enter the interface. Click the
“+” mark on the top right corner to add any registered user of the WearHealth
App. You can view the sports data, health, and sleeping conditions of the user
after he or she adds you as a friend.
13. Reminder. You can set up various reminders such as incoming calls, SMS,
alarm clocks, sedentary warnings, meetings, taking medicine, and drinking
water.
14. Lighting up screen by turning wrist: The function of enabling or
disabling lighting up screen by turning wrist can be set up on the App. The
display screen will automatically light up by turning your wrist when checking
the time.
VI. FQA
1. You cannot find the bracelet when pairing it?
A: Please make sure that Bluetooth has been enabled on your smartphone and the
version of your smartphone system is “supported”. Please make sure the
distance between your smartphone and the bracelet is within 0.5m when pairing.
The effective communication range of Bluetooth is within I Om after the
pairing is finished.
B. When pairing, please make sure that the Bluetooth for your smartphone and
the bracelet is not engaged or connected to any other device. You can try a
new connection after getting rid of any other paired device.
2. Sometimes the Bluetooth cannot be connected or have no response?
C. The Bluetooth services of some smartphones may occasionally have abnormal
conditions after being started again. Generally speaking, a normal connection
may be established by turning on and off the Bluetooth or restarting the
relevant smartphone and bracelet.
3. The device cannot be recharged?
D. The bracelet is equipped with a USB plug and please select a suitable
recharger. In general, a recharger of 5V voltage and 0.5-1A current shall be
selected for recharging the bracelet. The recharging current for the device is
small, while some power banks need large currents to start recharging. As a
result, such power banks are not suitable for recharging the bracelet.
4. The battery life is short and the power consumption is fast?
E. If the sport mode is enabled for a long term, the functions such as
continuous heart rate monitoring or lighting up screen by turning wrist are
enabled, or various reminders of messages and alarm clock reminders are set
up, power consumption will be increased to reduce standby time. Please disable
some functions with high power consumption as appropriate to extend the
standby time.
5. It fails to measure heart rate results?
F. For regular wearing, it is suggested that you wear it on the top of your
habitual wrist. Do not cover the bracelet with any garment or article. The
watchband shall properly cling to your wrist for the accuracy of your heart
rate may be affected by any loose or tight wearing.
The accuracy of the test may be affected if your skin is relatively dark or
you have thick hairs on your hand.
TECHNICAL SERVICE : http://www.imperiielectronics.com/contactenos
Importado par:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC
imperii RR FIERRO SmartBand Waterproof 3D Burn User Manual – Download
[optimized]
imperii RR FIERRO SmartBand Waterproof 3D Burn User Manual –
Download
imperii RR FIERRO SmartBand Waterproof 3D Burn User Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>