imperii RR FIERRO SmartWatch WiFi GPS Apolo Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
TE.03.0260
Please refer to this manual before using the product
1. Notes
1.1 The company reserves the right to modify the contents of this manual
without any further notification. It is normal that some functions may vary in
certain versions of software.
1.2 Please charge this product with the configured charger for no less than 2
hours before using it.
1.3 Please turn off the watch before installing SIM card. Please open the
small case at the back of watch, and push the built-in metal sheet to “OPEN”
before installing SIM card. After installing the SIM card, then push the
built-in metal sheet to “LOCK”.
1.4 This Android watch supports 3G WCDMA850/2100 frequency band and 2G
GSM850/900/1800/1900 frequency band.
1.5 To ensure longer battery life, it is recommended to close high power
consumption functions if they are needless for you such as Wake-up gesture,
GPS, WiFi, BT. It is normal that the watch temperature may increase mildly
while it is connecting with WIFI or 3G network because of higher power
consumption.
2. Product Overview
2.1 Basic Operating
1. Hold the power button to turn on the watch, it might be slower to enter
into the Android OS at the first time you use the watch:
I) language settings.
II) Set personal information, such as your body height, weight, daily work-out
goal.
III) Scan the QR code with your phone to download and install the app for
getting synchronization information from the watch. Connect the watch to your
phone via Bluetooth. The app will not bring cellular data consumption, and you
can get synchronization notice from your phone. For more details, please refer
to Synchronization Software Use Manual.
2. Once the watch is working, you can enter into the selection page by
pressing the button for around 2 seconds:
I) Power Off: Turn off the watch.
II) Reboot: Restart the watch.
III) Power Save: Shift to the power save mode then only the digital clock is
working. Press the blue button to cancel the power save function.
IV) Recent Task: Check the working apps and turn them off by swiping to
left/right.
V) Full/Small: Adjust the screen in round (Full) or square (Small) according
to your need. 3. Menu Operating 1) Slide to left to enter into the main
function menu 2) Slide to right to enter into the notification menu.
- Slide down to enter into the status bars and short-cut settings:
I) First page: telephone signal status, BT connecting status, time and date
II) Second page: Vibrator switch, Wake-up gesture switch, Brightness, flight mode, BT switch, WIFI switch, GPS switch, etc.
III) Third page: pedometer 4) Slide up to view the weather information (network is requested) 5) Slide right to return to the previous menu.
2.2 Watch Dial Setting
Hold pressing the dial for around 1 second to enter into the watch dial
selection pages, slide to choose any dial.
Note : you can download the new dials:
1. The network is needed (WI-FI)
2. Click “+” to enter into the dial selection pages
3. Preview the dials and click to download You can also click “-” to delete
the dial you have downloaded.
3.Detailed Use Instructions
3.1 Download Wiiwatch
3.1.1 When you turn on the watch for the first time, please choose the
platform of your phone, then click “NEXT” to complete. ( Figure 1 )
3.1.2 Scan the QR code with your phone, or search “Wiiwatch” on App Store or
Google play store and download it. ( Figure 2 )
3.1.3 Android Phone connection guides:
1. Turn on the Bluetooth of your phone, and open the WiiWatch app. ( Figure 3
)
2. Ensure both your phone’s and the watch’s Bluetooth is switched on. Then
open the WiiWatch, click to enter the setting function.( Figure 4 )
3.Then click to enter the device manage-ment interface and automatically
search for device, the first search will take 30S.( Figure 5 ) 4.Click the
device name that needs to be connected.( Figure 6 )
5.When the device name displays under Connected Device, meaning the
phone connects the watch successfully. The phone synchronizes the data and the
watch can function accordingly. Click the device name to disconnect.( Figure 7
)
6.To search new device, please click the “Start” button. Click the “Close”
button to cancel the search.( Figure 8 )
3.1.4 iPhone connection guides:
1.Turn on the Bluetooth on both the phone and watch. Then follow the steps of
“Connect Phone” to connect Bluetooth.(Figure 9, Figure 10, Figurell )
1.1 Install the Wiiwatch App;
1.2 Open Wiiwatch on your phone;
1.3 Click the Search button to search your phone and connect it; (Figure 12,
Figure 13)
1.4 When the Bluetooth pairing request pops-up on your phone, please click
“Pair”. (Figure 14)
2.After completing the connection of two devices, the phone can synchronize the data from the watch, and the watch can operate correspond-ing functions.( Figurel5 )
Note :
1. Data synchronization between App and watch will not consume network
traffic.
2. The installation and update of mobile App requires Internet, so please
operate in WIFI mode.
3. Please ensure the download in the environment with sufficient light and
fine network.
4. Keep the Bluetooth open on both your phone and watch when connected
synchronously.
5. When the phone pops up the notification of watch’s read permission, please
allow it for receiving notifications.
6. Some android smartphones will not be able to install the app, so please
enter the “secure and privacy” setting on your phone and open the “unknown
source” in order to complete the installation.
7. If you have downloaded the relevant app from other channels, please check
the app version and make sure it is the latest version of the app. Please
update the app to the latest version when there is new version updates.
4. Functions introduction
4.1 After inserting the SIM card, contacts, phone, message, and other local
functions can be used.
4.2 Bluetooth Phone Call When the phone and the watch are connected via
Bluetooth, the Bluetooth phone call, contact, and synchronous phone call
records can be realized.
4.3 Remote Capture When the watch is connected to the phone’s sync app, the
phone camera can be controlled and photographed on the watch. Remote
photograph requires turning the camera of the phone on first. The photos will
be saved on the phone, and the android phone will be saved in the third-party
application photo folder.
4.4 Music Control When the watch is connected to the phone’s sync app, you can
switch songs and control the play of music with your watch.
4.5 Health The data of Pedometer and Heart rate can be Synchronized to the
phone via sync app.
4.6 Find My Device When the watch is connected to the phone’s sync app, open
“Find my device” and click “Start” to find the phone, the phone will alert.
5.Precautions for Use
5.1 Please charge the watch completely before use. Charging time is 1-2 hours.
5.2 Please use a charger adaptor with 5V 1A to connect our standard magnetic
cable to charge the watch, Please make sure that the cable is well connected
during charging.(Most of the charger adapters of the cellphones are
compatible, check if the specification of the adapter is 5V 1 A)
5.3 Anti lost function is standby only while the Bluetooth is well connected.
5.4 If when the watch is connected to the phone’s sync app, some functions
still cannot be used, please delete the matched Bluetooth connection and
reconnect again.
6.Troubleshooting
In case there’s a problem during the using of the watch, please solve it
accordingly by the following ways. If the problem still exists, please contact
the seller or designated maintenance personnel.
6.1 The watch cannot be turned on 1. Press the power button for a longer time
2. Make sure there is enough battery 3. Please recharge the watch and start it
again.
6.2 The watch shut down automatically It is possible the battery is used up.
Please recharge the watch and start it again.
6.3 Short battery performance 1.Make sure the battery has been completely
charged. 2.Turn off the needless functions which are high-power consumption
such as GPS, WIFI, walk-up gesture etc.
6.4 Watch cannot be charged 1.Check if the battery can be used. The
performance of battery will be reduced after several years using. 2.Check if
the charger is working properly, (both the adapter and cable), if not,try
another one. 3.Check the connection of watch and cable during charging.
TECHNICAL SERVICE: http://www.imperiielectronics.com/contactenos
Importado por:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC
imperii RR FIERRO SmartWatch WiFi GPS Apolo Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartWatch WiFi GPS Apolo Instruction Manual –
Download
imperii RR FIERRO SmartWatch WiFi GPS Apolo Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>